The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Identification of nonlinear structural elements by force-state mapping
Abstract
A major contributor to the passive damping and potentially nonlinear behavior of large space structures is the behavior of the joints. Proposed is an experimental technique called 'force-state mapping' that will allow ground testing of these key structural elements. The technique includes the use of very accurate instrumentation to measure the force transmission properties of a structural element as a function of its mechanical state. When these data are presented in the form of a force-state map, the nonlinearities exhibit distinctively recognizable patterns. This presentation of the data allows the extraction of the describing parameters of the linear and nonlinear behavior and the energy dissipation characteristics of the joint. A series of tests were carried out on an idealized laboratory test article to demonstrate the technique. Strong structural nonlinearities, including a cubic hardening spring, friction, and impact phenomena, were introduced and measured. Parameters identified by the force-state mapping technique are compared with those made by traditional techniques and the errors involved in the measurement are estimated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728
Cited by
Past, present and future of nonlinear system identification in structural dynamics
Kerschen, G., Worden, K., Vakakis, A. F., & Golinval, J.-C. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.04.008 · Cited by 1,141
Computational methods in optimization considering uncertainties – An overview
Schuëller, G. I., & Jensen, H. A. (2008) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2008.05.004 · Cited by 572
A review of nonlinear dynamics applications to structural health monitoring
Worden, K., Farrar, C. R., Haywood, J., & Todd, M. (2008) · Structural Control and Health Monitoring · doi:10.1002/stc.215 · Cited by 212
Metadata
- Authors
- Crawley, E. F., & Aubert, A. C.
- Venue
- AIAA Journal
- Published
- 1986-01
- Volume
- 24
- Issue
- 1
- Pages
- 155-162
- ISSN
- 0001-1452 (ISSN-L)
- 1533-385X
- OpenAlex
- W2159049114
- Cited by
- 177
- References
- 1
- FWCI
- 23.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Identification of nonlinear structural elements by force-state mapping. https://app.cochat.ai/papers/10.2514/3.9236
- The paper
- Crawley, E. F., & Aubert, A. C. (1986). Identification of nonlinear structural elements by force-state mapping. AIAA Journal. https://doi.org/10.2514/3.9236
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.