Temperature Distributions in Hollow Cathode Emitters
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Hollow cathodes used as electron sources in ion engines and Hall thrusters rely on the maintenance of a low work function barium adsorbate layer on the interior surface of the emitter.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Holman, J. P. (1976) · Cited by 9,157
28,000 Hour Xenon Hollow Cathode LifeTest Results
Sarver-Verhey, T. R. (1997) · NASA Technical Reports Server (NASA) · Cited by 74
Demonstration of the NSTAR ion propulsion system on the Deep Space One mission
Polk, J., Kakuda, R., Brinza, D. E., Katz, I. M., Anderson, J. R., Brophy, J., Rawlin, V. K., Patterson, M., Sovey, J. S., & Hamley, J. (2001) · NASA Technical Reports Server (NASA) · Cited by 70
Self-citationPerformance of the NSTAR ion propulsion system on the Deep Space One mission
Polk, J. E., Kakuda, R., Anderson, J., Brophy, J., Rawlin, V. K., Patterson, M., Sovey, J. S., & Hamley, J. (2001) · AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2001-965 · Cited by 69
Self-citationHollow Cathode and Keeper-Region Plasma Measurements Using Ultra-Fast Miniature Scanning Probes
Goebel, D., Katz, I., Watkins, R., & Jameson, K. (2004) · 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-3430 · Cited by 63 · cited 2×
“In addition, the distribution of plasma density, potential and electron temperature will be measured for this cathode geometry using a fast scanning Langmuir probe [8].”
BackgroundMethodDestructive evaluation of a xenon hollow cathode after a 28,000 hour life test
Sarver-Verhey, T. R. (1998) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.1998-3482 · Cited by 55
Theoretical and experimental studies of orificed, hollow cathode operation /
Salhi, A. (1993) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 35
Theoretical Model of a Hollow Cathode Insert Plasma
Mikellides, I. G., Katz, I. M., Goebel, D. M., & Polk, J. E. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-3817 · Cited by 35
Self-citationA first-principles model for orificed hollow cathode operation
Salhi, A., & Turchi, P. J. (1992) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.1992-3742 · Cited by 28
Continuing life test of a xenon hollow cathode for a space plasma contactor
Sarver-Verhey, T. R. (1994) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.1994-3312 · Cited by 24 · cited 2×
“The thermocouple used in the wear test may have had more thermal contact resistance [3].”
Method
Research works printed but not linked: 5
- Sengupta A., 2003, 39th Joint Propulsion Conference, 2003
- Verhey T.R., 1990, FL, 90
- Patterson S.D., 2001, In27thInternational Electric PropulsionConference
- Goebel D.M., 2004, FL, 2004
- Holman J.P., 1981, NewYork
Cited by
Recent progress in research and development of hollow cathodes for electric propulsion
Lev, D. R., Mikellides, I. G., Pedrini, D., Goebel, D. M., Jorns, B., & McDonald, M. (2019) · Reviews of Modern Plasma Physics · doi:10.1007/s41614-019-0026-0 · Cited by 125
Wear Mechanisms in Electron Sources for Ion Propulsion, II: Discharge Hollow Cathode
Mikellides, I. G., Katz, I., Goebel, D. M., Jameson, K. K., & Polk, J. E. (2008) · Journal of Propulsion and Power · doi:10.2514/1.33462 · Cited by 104
“based onmeasurements taken later during the testing of individual cathodes [43].”
BackgroundSelf-citationWear Mechanisms in Electron Sources for Ion Propulsion, I: Neutralizer Hollow Cathode
Mikellides, I. G., & Katz, I. (2008) · Journal of Propulsion and Power · doi:10.2514/1.33461 · Cited by 89
“Previous simulations of the DHC employed a profile that was obtained by direct measurement [11].”
MethodInfluentialGoebel, D. M., Becatti, G., Mikellides, I. G., & Lopez Ortega, A. (2021) · Journal of Applied Physics · doi:10.1063/5.0051228 · Cited by 95
Lifetime Assessment of the NEXT Ion Thruster
Noord, J. V. (2007) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2007-5274 · Cited by 72
Recent advances in nuclear powered electric propulsion for space exploration
Cassady, R. J., Frisbee, R., Gilland, J. H., Houts, M. G., LaPointe, M. R., Maresse-Reading, C. M., Oleson, S. R., Polk, J. E., Russell, D., & Sengupta, A. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.10.015 · Cited by 66
Self-citationElectric Propulsion Technology Development for the Jupiter Icy Moon Orbiter Project
Oleson, S. R. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-3449 · Cited by 52
Numerical Simulations of the Partially Ionized Gas in a 100-A LaB6 Hollow Cathode
Mikellides, I. G., Goebel, D. M., Jorns, B. A., Polk, J. E., & Guerrero, P. (2015) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2014.2320876 · Cited by 48
Self-citationAn Overview of the Nuclear Electric Xenon Ion System (NEXIS) Activity
Randolph, T. M., & Polk, J. E. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-3450 · Cited by 46
Self-citationA Review of Low-Power Electric Propulsion Research at the Space Propulsion Centre Singapore
Potrivitu, G.-C., Sun, Y., Rohaizat, M. W. A. B., Cherkun, O., Xu, L., Huang, S., & Xu, S. (2020) · Aerospace · doi:10.3390/aerospace7060067 · Cited by 42
“through the orifice, extracted by the external anode, reach supersonic flow that is large enough to allow for deviations from the equilibrium electron energy distribution function (non-Maxwellian EEDF), leading to the emergence of plasma turbulence and instabilities in the plume [45,46,48].”
BackgroundDynamics of a hollow cathode discharge in the frequency range of 1–500 kHz
Mikellides, I. G., Ortega, A. L., Goebel, D. M., & Becatti, G. (2020) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab69e4 · Cited by 38
Characterization of Hollow Cathode Performance and Thermal Behavior
Polk, J. E., Goebel, D. M., Watkins, R. M., Jameson, K. K., & Yoneshige, L. (2006) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2006-5150 · Cited by 37
“Insert temperatures were measured using an optical pyrometer system described in detail in [23].”
MethodSelf-citationExamination of a 5 A-class cathode with a LaB6 flat disk emitter in the 2 A–20 A current range
Joussot, R., Grimaud, L., & Mazouffre, S. (2017) · Vacuum · doi:10.1016/j.vacuum.2017.09.021 · Cited by 37
Theoretical Model of a Hollow Cathode Insert Plasma
Mikellides, I. G., Katz, I. M., Goebel, D. M., & Polk, J. E. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-3817 · Cited by 35
Self-citationCao, S., Ren, J., Tang, H., Zhang, Z., Wang, Y., Cao, J., & Chen, Z. (2018) · Physics of Plasmas · doi:10.1063/1.5029945 · Cited by 34
Extending Hollow Cathode Life for Electric Propulsion for Long-Term Missions
Goebel, D. M. (2004) · Space 2004 Conference and Exhibit · doi:10.2514/6.2004-5911 · Cited by 32
Thermal Model of the Hollow Cathode Using Numerically Simulated Plasma Fluxes
Katz, I., Mikellides, I. G., Polk, J. E., Goebel, D. M., & Hornbeck, S. E. (2007) · Journal of Propulsion and Power · doi:10.2514/1.21103 · Cited by 27
“A more detailed description of the system and methods used for the measurements is provided in [19,20].”
MethodSelf-citationInsert Heating and Ignition in Inert-Gas Hollow Cathodes
Katz, I. M., Mikellides, I. G., Goebel, D. M., & Polk, J. E. (2008) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2008.2004363 · Cited by 27
Self-citationEmitter temperature distributions in the NSTAR discharge hollow cathode
Grubisic, A. N. (2005) · ePrints Soton (University of Southampton) · Cited by 26
Modeling on plasma energy balance and transfer in a hollow cathode
Cao, S., Ren, J., Tang, H., Pan, R., Zhang, Z., Zhang, K., & Cao, J. (2019) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ab197e · Cited by 25
The Effect of Reactive Gases on Hollow Cathode Operation
Polk, J. E. (2006) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2006-5153 · Cited by 19
Self-citationPerformance and Wear Test Results for a 20 kW-Class Ion Engine with Carbon-Carbon Grids
Polk, J., Goebel, D. M., Synder, J., Schneider, A., Johnson, L., & Sengupta, A. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-4393 · Cited by 15
Self-citationMikellides, I. G., & Katz, I. M. (2007) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2007-5168 · Cited by 14
Mikellides, I. G., Guerrero, P., Ortega, A. L., & Polk, J. E. (2018) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2018-4722 · Cited by 15
Self-citationHollow cathode ignition studies and model development
Goebel, D. M. (2005) · Cited by 13
Development and Testing of High Current Hollow Cathodes for High Power Hall Thrusters
Kamhawi, H., & Noord, J. V. (2012) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2012-4080 · Cited by 12
Hybrid-PIC Simulation of LaB6 Hollow Cathode Self-Heating Characteristics
Kubota, K., Oshio, Y., Watanabe, H., Cho, S., Ohkawa, Y., & Funaki, I. (2019) · TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES · doi:10.2322/tjsass.62.11 · Cited by 12
The effect of facility background pressure on hollow cathode operation
Hall, S. J., Gray, T. G., Yim, J., Choi, M., Sarver-Verhey, T. R., & Kamhawi, H. (2021) · Journal of Applied Physics · doi:10.1063/5.0061045 · Cited by 10
Neutralizer hollow cathode simulations and comparisons with ground test data
Mikellides, I. G., Snyder, J., Goebel, D. M., Katz, I. M., & Herman, D. A. (2009) · NASA Technical Reports Server (NASA) · Cited by 10
Long and Short Term Effects of Oxygen Contaminants on Hollow Cathode Operation
Polk, J. E. (2007) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2007-5191 · Cited by 9
Self-citationNumerical Simulations of a Hall Thruster Hollow Cathode Plasma
Mikellides, I. G., Katz, I. M., Jameson, K. K., & Goebel, D. M. (2007) · Cited by 9
Neutralizer Hollow Cathode Simulations and Validation With Experiments
Mikellides, I. G., Katz, I. M., Goebel, D. M., Snyder, J., & Herman, D. A. (2009) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2009-5196 · Cited by 9
High Current Cathode Development for 50 kW Class Hall Thrusters
John, J. W., Sarver-Verhey, T. R., Jacobson, D., & Kamhawi, H. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-4244 · Cited by 8
Model of a Hollow Cathode Insert Plasma
Mikellides, I. G., Katz, I. M., Goebel, D. M., & Polk, J. E. (2004) · NASA Technical Reports Server (NASA) · Cited by 8
Self-citationInfluence of heating on the discharge characteristics of a hollow cathode
Hu, Y., Ning, Z., Liu, X., Chu, Y., Wei, M., Shen, Y. R., & Zhu, X.-M. (2019) · Plasma Science and Technology · doi:10.1088/2058-6272/ab472a · Cited by 7
“approximately characterized by the highest tungsten temperature [26, 30].”
BackgroundPlasma Surface Interaction Studies for Next-Generation Ion Thrusters
Tynan, G. R., Doerner, R. P., Goebel, D. M., Katz, I. M., Oyerzabal, E., & Taylor, K. (2004) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.2004-4104 · Cited by 7
Observation and Analysis of Graphite Hollow Cathode after 45,000-Hour Life Test
Ohkawa, Y., Higuchi, T., Hayakawa, Y., Miyazaki, K., & Nagano, H. (2013) · Cited by 6
An experimental study on the degradation of the C12A7 hollow cathode
Hua, Z., Wang, P., Luo, Z., Zhang, X., & Leichao, T. I. A. N. (2022) · Plasma Science and Technology · doi:10.1088/2058-6272/ac5c26 · Cited by 6
“Measurement of the resistance of a cylindrical emitter using a multimeter shows that the resistance of the C12A7 electride emitter is tens to hundreds of ohms, much higher than the 0.6 Ω of LaB6.”
MethodInfluentialElectric Propulsion for Project Prometheus' Jupiter Icy Moon Orbiter
Oleson, S. R. (2004) · Space 2004 Conference and Exhibit · doi:10.2514/6.2004-5908 · Cited by 6
Modélisation d'une cathode creuse pour propulseur à plasma
Sary, G. (2016) · theses.fr (ABES) · doi:10.70675/9aee20b5ze30fz430ezac81z6bf48413107e · Cited by 6
Oshio, Y., Hirai, K., Watanabe, H., Horisawa, H., & Funaki, I. (2024) · Journal of Electric Propulsion · doi:10.1007/s44205-024-00096-9 · Cited by 5
“Under these conditions, the current density in the orifice region was high, indicating that Joule heating was predominant [30, 31].”
Hollow Cathode Ignition and Life Model
Tighe, W., Chien, K.-R., Goebel, D. M., & Longo, R. T. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-3666 · Cited by 5
Randolph, T. M. (2004) · Space 2004 Conference and Exhibit · doi:10.2514/6.2004-5909 · Cited by 5
Martens, P. D., Barton, D. A. W., Schartner, A. P., Charles, C., & Boswell, R. W. (2025) · Journal of Electric Propulsion · doi:10.1007/s44205-025-00115-3 · Cited by 4
“Although the emitter surface temperature has been reported for dispenser cathodes, it has been limited to internal temperature measurements for LaB 6 emitters, such as inserting thermocouples into holes drilled in the emitter [16, 17].”
Korkmaz, O., & Celik, M. (2014) · Contributions to Plasma Physics · doi:10.1002/ctpp.201400036 · Cited by 4
“It is found in experimental studies [11], [39] conducted with hollow cathodes having BaO-W insert that orifice plate temperature could be up to 100◦C cooler than insert temperature.”
BackgroundCurrent and Temperature Thresholds for Short-Term Oxygen Poisoning of Hollow Cathodes
Capece, A. M., Polk, J. E., & Shepherd, J. E. (2008) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2008-4813 · Cited by 4
Self-citationMeasurement of Barium Production in a Hollow Cathode
Crofton, M. W. (2005) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (JPC) · doi:10.2514/6.2005-3665 · Cited by 4
Fundamental Ion-Surface Interactions in Plasma Thrusters
Kolasinski, R. D. (2007) · doi:10.7907/xwsv-1e98 · Cited by 3
Oshio, Y., Hirai, K., Watanabe, H., Horisawa, H., & Funaki, I. (2024) · doi:10.21203/rs.3.rs-5180086/v1 · Cited by 1
Measurement of Barium Production in a Hollow Cathode
Crofton, M. W. (2005) · AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2005-368
Characterization of a High Current, Long Life Hollow Cathode
McEwen, H., Kamhawi, H., & Noord, J. L. V. (2006) · NASA Technical Reports Server (NASA)
Electric Propulsion Technology Development for the Jupiter Icy Moons Orbiter Project
(n.d.) · NASA STI Repository (National Aeronautics and Space Administration)
Soulas, G. C., Choi, M., Mackey, J., Yim, J., Sarver-Verhey, T. R., & Shastry, R. (2017) · NASA STI Repository (National Aeronautics and Space Administration)
実機スケールにおける自己誘起磁場型MPDスラスタの性能特性と陰極現象
田内, 思., タウチ, シ., & Tauchi, S. (2021) · SOKENDAI (Graduate University for Advanced Studies)
Metadata
- Authors
- Polk, J., Marrese, C., Dang, L., Johnson, L., & Thornber, B.
- Affiliations
- Jet Propulsion Laboratory (US)
- Northrup Grumman Space Technologies
- International Space University (FR)
- ORCID
- Johnson, Lee
- Venue
- 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit
- Published
- 2004-06-26
- OpenAlex
- W2056396508
- Cited by
- 50
- References
- 16
- Citations by year
- 2025: 1 · 2024: 2 · 2022: 1 · 2021: 2 · 2020: 2 · 2019: 4 · 2018: 2 · 2017: 1 · 2014: 2 · 2013: 1 · 2012: 1
- FWCI
- 9.92
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit (publishedVersion)
- NASA Technical Reports Server (NASA)
- Funders
- National Aeronautics and Space Administration
- Jet Propulsion Laboratory
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-Pressure Plasma Processing and Diagnostics
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Vacuum and Plasma Arcs
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Gyrotron and Vacuum Electronics Research
- Keywords
- temperature distribution, electron source, ion thrusters, Hall thruster, work function
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.