The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Fischer-Tropsch Waxes Upgrading via Hydrocracking and Selective Hydroisomerization
Open accessAbstract
In recent years, the production of hydrocarbon cuts from various sources via the Fischer-Tropsch process has lived a renewed interest. Paraffinic cuts produced via the Fischer-Tropsch reaction can be upgraded either to liquid fuels (middle distillates) or to lubricant base oil of high quality. The first kind of upgrading involves the use of a hydrocracking catalyst whereas for the second kind of upgrading selective hydroisomerization catalysts can be selected. Both catalysts are bifunctional and contain an hydrogenation/dehydrogenation function and an acidic function; however, it is shown that depending of the kind of upgrading needed, the acidic function has to fulfill various requirements. The first part of this article is a short review dealing with long chain n-paraffin hydrocracking mechanisms and catalysts. Specificities of Fischer-Tropsch feedstocks compared to conventional ones as well as the potential impact of oxygenate compounds on the hydrocracking catalysts are underlined. The second part of this article is devoted to the selective hydroisomerization mechanisms and catalysts. It is shown that the topology of the solid acid porosity is a key factor for governing the selectivity of the catalyst towards hydroisomerization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Structure of synthetic zeolite ZSM-5
KOKOTAILO, G. T., LAWTON, S. L., OLSON, D. H., & MEIER, W. M. (1978) · Nature · doi:10.1038/272437a0 · Cited by 1,014
Shape-selective catalysis in zeolites
Csicsery, S. M. (1984) · Zeolites · doi:10.1016/0144-2449(84)90024-1 · Cited by 689
Catalytic hydrogenolysis and dehydrogenation over copper-nickel alloys
SINFELT, J. (1972) · Journal of Catalysis · doi:10.1016/0021-9517(72)90072-3 · Cited by 635
Polyfunctional Heterogeneous Catalysis
Weisz, P. B. (1962) · Advances in Catalysis · doi:10.1016/s0360-0564(08)60287-4 · Cited by 459
Hydrocracking Science and Technology
Scherzer, J., & Gruia, A. J. (1996) · CRC Press eBooks · doi:10.1201/9781482233889 · Cited by 394
INTRACRYSTALLINE AND MOLECULAR-SHAPE-SELECTIVE CATALYSIS BY ZEOLITE SALTS
Weisz, P. B., & Frilette, V. J. (1960) · The Journal of Physical Chemistry · doi:10.1021/j100832a513 · Cited by 387
Suitable catalysts for hydroisomerization of long-chain normal paraffins
Deldari, H. (2005) · Applied Catalysis A: General · doi:10.1016/j.apcata.2005.07.008 · Cited by 360
Hydroisomerization and Hydrocracking of Alkanes
Alvarez, F., Ribeiro, F. R., Pérot, G., Thomazeau, C., & Guisnet, M. R. (1996) · Journal of Catalysis · doi:10.1006/jcat.1996.0275 · Cited by 334
Mériaudeau, P., Tuan, V. A., Nghiem, V. T., Lai, S. Y., Hung, L. N., & Naccache, C. (1997) · Journal of Catalysis · doi:10.1006/jcat.1997.1647 · Cited by 259
Zeolite catalysis in hydroprocessing technology
Maxwell, I. E. (1987) · Catalysis Today · doi:10.1016/0920-5861(87)80006-8 · Cited by 185
KAZANSKY, V (1989) · Journal of Catalysis · doi:10.1016/0021-9517(89)90139-5 · Cited by 179
A Fundamental Kinetic Model for Hydrocracking of C8 to C12 Alkanes on Pt/US–Y Zeolites
Martens, G. G., Marin, G. B., Martens, J. A., Jacobs, P. A., & Baron, G. V. (2000) · Journal of Catalysis · doi:10.1006/jcat.2000.2993 · Cited by 146
Self-citationThe framework topology of ZSM-48: A high silica zeolite
Schlenker, J. L., Rohrbaugh, W. J., Chu, P., Valyocsik, E. W., & KOKOTAILO, G. T. (1985) · Zeolites · doi:10.1016/0144-2449(85)90124-1 · Cited by 132
Claeys, M., & van Steen, E. (2004) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(04)80465-8 · Cited by 100
Studies on Wax Isomerization for Lubes and Fuels
Miller, S. J. (1994) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(08)63796-9 · Cited by 84
Sastre, G., Chica, A., & Corma, A. (2000) · Journal of Catalysis · doi:10.1006/jcat.2000.3002 · Cited by 83
New Description of the Disorder in Zeolite ZSM-48
Lobo, R. F., & van Koningsveld, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja020569v · Cited by 77
New insights into parameters controlling the selectivity in hydrocracking reactions
Benazzi, E., Leite, L., Marchal-George, N., Toulhoat, H., & Raybaud, P. (2003) · Journal of Catalysis · doi:10.1016/s0021-9517(03)00041-1 · Cited by 74
Hydrocracking of Iron-Catalyzed Fischer−Tropsch Waxes
Leckel, D. (2005) · Energy & Fuels · doi:10.1021/ef050085v · Cited by 72
Leckel, D., & Liwanga-Ehumbu, M. (2006) · Energy & Fuels · doi:10.1021/ef060319q · Cited by 70
Single-Event Rate Parameters for the Hydrocracking of Cycloalkanes on Pt/US-Y Zeolites
Martens, G., Thybaut, J. W., & Marin, G. B. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000799n · Cited by 69
Mériaudeau, P., Tuan, V. A., Nghiem, V. T., Sapaly, G., & Naccache, C. M. (1999) · Journal of Catalysis · doi:10.1006/jcat.1999.2476 · Cited by 67
Low-Pressure Hydrocracking of Coal-Derived Fischer−Tropsch Waxes to Diesel
Leckel, D. (2007) · Energy & Fuels · doi:10.1021/ef060601x · Cited by 56
de Haan, R., Joorst, G., Mokoena, E. M., & Nicolaides, C. P. (2007) · Applied Catalysis A General · doi:10.1016/j.apcata.2007.05.022 · Cited by 48
Factors Influencing the Selectivity of Hydrocracking in Zeolites
Weitkamp, J., & Ernst, S. (1990) · NATO ASI series. Series B : Physics · doi:10.1007/978-1-4684-5787-2_20 · Cited by 47
Effect of confinement on the selectivity of hydrocracking
Toulhoat, H., Raybaud, P., & Benazzi, E. (2003) · Journal of Catalysis · doi:10.1016/j.jcat.2003.09.014 · Cited by 41
Collins, J. P., Freide, J. J. H. M. F., & Nay, B. (2006) · Journal of Natural Gas Chemistry · doi:10.1016/s1003-9953(06)60001-7 · Cited by 39
Böhringer, W., Kotsiopoulos, A., Boer, M. D., Knottenbelt, C., & Fletcher, J. C. Q. (2007) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(07)80488-5 · Cited by 37
Selectivity Effect of Oxygenates in Hydrocracking of Fischer−Tropsch Waxes
Leckel, D. (2007) · Energy & Fuels · doi:10.1021/ef060603h · Cited by 37
Fischer‐Tropsch Synthesis ‐ Industrial
Dry, M. E. (2010) · Encyclopedia of Catalysis · doi:10.1002/0471227617.eoc094 · Cited by 15
Cited by
Nanoscale intimacy in bifunctional catalysts for selective conversion of hydrocarbons
Zecevic, J., Vanbutsele, G., de Jong, K. P., & Martens, J. A. (2015) · Nature · doi:10.1038/nature16173 · Cited by 655
Self-citationCatalytic Hydrocracking—Mechanisms and Versatility of the Process
Weitkamp, J. (2012) · ChemCatChem · doi:10.1002/cctc.201100315 · Cited by 633
Integrated tuneable synthesis of liquid fuels via Fischer–Tropsch technology
Li, J., He, Y., Tan, L., Zhang, P., Peng, X., Oruganti, A., Yang, G., Abe, H., Wang, Y., & Tsubaki, N. (2018) · Nature Catalysis · doi:10.1038/s41929-018-0144-z · Cited by 488
Converting Algal Triglycerides to Diesel and HEFA Jet Fuel Fractions
Robota, H. J., Alger, J. C., & Shafer, L. (2013) · Energy & Fuels · doi:10.1021/ef301977b · Cited by 104
Toward the Atomic Scale Simulation of Intricate Acidic Aluminosilicate Catalysts
Chizallet, C. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c01136 · Cited by 79
Metadata
- Authors
- Bouchy, C., Hastoy, G., Guillon, E., & Martens, J. A.
- Venue
- Oil & Gas Science and Technology - Revue de l'IFP
- Publisher
- EDP Sciences
- Published
- 2009-01
- Volume
- 64
- Issue
- 1
- Pages
- 91-112
- ISSN
- 1294-4475 (ISSN-L)
- 1953-8189
- OpenAlex
- W2107467573
- Cited by
- 268
- References
- 30
- FWCI
- 6.39
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.