The DOI matches its Crossref record.
Evaluation of hot-melt extrusion as a new technique for the production of polymer-based pellets for sustained release capsules containing high loadings of freely soluble drugs
Abstract
Hot-melt screw extrusion was presented as an alternative method for producing polymer-based sustained release pellets. Special care was paid to the case of highly dosed freely soluble drugs which often pose technological problems with the usual manufacturing processes. In a preformulation study, polymers, plasticizers and drugs were selected according to various criteria including thermal stability. During these preliminary tests, the optimum extrusion conditions were defined. Four polymers were considered for extrusion trials, namely ethylcellulose, cellulose acetate butyrate, poly(ethylene-co-vinyl acetate) and a polymethacrylate derivative (Eudragit® RSPM). Pellets were produced with diltiazem hydrochloride as model drug. The surface appearance of various formulations was examined and the porosity assessed by means of mercury porosimetry. A distinct structure was found for the EVAC-based pellets. The overall porosity was less than 10%. Lastly, in vitro release of the drug showed a biphasic profile with a slow diffusion-controlled phase following a much faster release. The release rate of diltiazem hydrochloride from EVAC-based hot-melt extruded pellets of size 2 × 2 mm was very low. It is the opinion of the authors that this type of dosage form offers many potentialities because of its ease of processing and the wide possibility of modulating the release through the addition of hydrophilic excipients.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Pharmaceutical Applications of Hot-Melt Extrusion: Part I
Crowley, M. M., Zhang, F., Repka, M. A., Thumma, S., Upadhye, S. B., Kumar Battu, S., McGinity, J. W., & Martin, C. (2007) · Drug Development and Industrial Pharmacy · doi:10.1080/03639040701498759 · Cited by 824
Melt extrusion: from process to drug delivery technology
Breitenbach, J. (2002) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(02)00061-9 · Cited by 742
Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation
Patil, H., Tiwari, R. V., & Repka, M. A. (2016) · AAPS PharmSciTech · doi:10.1208/s12249-015-0360-7 · Cited by 584
Eudragit®: a technology evaluation
Thakral, S., Thakral, N. K., & Majumdar, D. K. (2013) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2013.736962 · Cited by 458
Ghebremeskel, A. N., Vemavarapu, C., & Lodaya, M. (2007) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2006.08.010 · Cited by 328
Metadata
- Authors
- Follonier, N., Doelker, E., & Cole, E. T.
- Venue
- Drug Development and Industrial Pharmacy
- Publisher
- Informa UK Limited
- Published
- 1994-01
- Volume
- 20
- Issue
- 8
- Pages
- 1323-1339
- ISSN
- 0363-9045 (ISSN-L)
- 1520-5762
- OpenAlex
- W2112804065
- Cited by
- 169
- References
- 0
- FWCI
- 1.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Evaluation of hot-melt extrusion as a new technique for the production of polymer-based pellets for sustained release capsules containing high loadings of freely soluble drugs. https://app.cochat.ai/papers/10.3109/03639049409038373
- The paper
- Follonier, N., Doelker, E., & Cole, E. T. (1994). Evaluation of hot-melt extrusion as a new technique for the production of polymer-based pellets for sustained release capsules containing high loadings of freely soluble drugs. Drug Development and Industrial Pharmacy. https://doi.org/10.3109/03639049409038373
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.