The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites
Open accessAbstract
Abaca fibre reinforced PP composites were fabricated with different fibre loadings (20, 30, 40, 50 wt% and in some cases 35 and 45 wt%).Flax and jute fibre reinforced PP composites were also fabricated with 30 wt% fibre loading.The mechanical properties, odour emission and structure properties were investigated for those composites.Tensile, flexural and Charpy impact strengths were found to increase for fibre loadings up to 40 wt% and then decreased.Falling weight impact tests were also carried out and the same tendency was observed.Owing to the addition of coupling agent (maleated polypropylene -MAH-PP), the tensile, flexural and falling weight impact properties were found to increase in between 30 to 80% for different fibre loadings.When comparing jute and flax fibre composites with abaca fibre composites, jute fibre composites provided best tensile properties but abaca fibre polypropylene composites were shown to provide best notch Charpy and falling weight impact properties.Odours released by flax fibre composites were smaller than jute and abaca fibre composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical Behavior of Materials
Meyers, M. A., & Chawla, K. K. (2008) · Cambridge University Press eBooks · doi:10.1017/cbo9780511810947 · Cited by 3,376
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,151
Biodegradable Polymers for the Environment
Gross, R. A., & Kalra, B. (2002) · Science · doi:10.1126/science.297.5582.803 · Cited by 1,981
Natural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Dynamic mechanical analysis of banana fiber reinforced polyester composites
Pothan, L. A., Oommen, Z., & Thomas, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00254-3 · Cited by 925
Joseph, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00098-2 · Cited by 538
Puglia, D., Biagiotti, J., & Kenny, J. M. (2005) · Journal of Natural Fibers · doi:10.1300/j395v01n03_03 · Cited by 390
Macromolecular Materials and Engineering
(2006) · Macromolecular Materials and Engineering · doi:10.1002/(issn)1439-2054 · Cited by 384
Bledzki, A. K., Faruk, O., & Sperber, V. E. (2006) · Macromolecular Materials and Engineering · doi:10.1002/mame.200600113 · Cited by 251
Self-citationBiocomposites Made from Short Abaca Fiber and Biodegradable Polyesters
Shibata, M., Ozawa, K., Teramoto, N., Yosomiya, R., & Takeishi, H. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200290031 · Cited by 235
Pothan, L. A., & Thomas, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00092-7 · Cited by 194
Biodegradable polyester composites reinforced with short abaca fiber
Shibata, M., Takachiyo, K., Ozawa, K., Yosomiya, R., & Takeishi, H. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10665 · Cited by 194
Bledzki, A. K., & Faruk, O. (2003) · Applied Composite Materials · doi:10.1023/a:1025741100628 · Cited by 176
Self-citationQiu, W., Endo, T., & Hirotsu, T. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.21123 · Cited by 100
Milling‐induced esterification between cellulose and maleated polypropylene
Qiu, W., Zhang, F., Endo, T., & Hirotsu, T. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.13368 · Cited by 62
Bledzki, A. K., Faruk, O., & Mamun, A. A. (2008) · Polimery · doi:10.14314/polimery.2008.120 · Cited by 38
Self-citation
Cited by
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Self-citationGreen composites: A review of adequate materials for automotive applications
Koronis, G., Silva, A., & Fontul, M. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.07.004 · Cited by 1,198
A short review on basalt fiber reinforced polymer composites
Dhand, V., Mittal, G., Rhee, K. Y., Park, S.-J., & Hui, D. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2014.12.011 · Cited by 1,080
Meereboer, K. W., Misra, M., & Mohanty, A. K. (2020) · Green Chemistry · doi:10.1039/d0gc01647k · Cited by 965
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Metadata
- Authors
- Bledzki, A. K., Mamun, A. A., & Faruk, O.
- Venue
- Express Polymer Letters
- Published
- 2007
- Volume
- 1
- Issue
- 11
- Pages
- 755-762
- ISSN
- 1788-618X (ISSN-L)
- OpenAlex
- W2032668268
- Cited by
- 254
- References
- 16
- FWCI
- 5.28
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.