The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Starch-based nanocomposites reinforced with flax cellulose nanocrystals
Open accessAbstract
In this study, the cellulose crystals, prepared by acid hydrolysis of flax fiber, consisted of slender rods with lengths ranging from 100 to 500 nm and diameters ranging from 10 to 30 nm, respectively. After mixing the suspension of flax cellulose nanocrystals (FCNs) and plasticized starch (PS), the nanocomposite films were obtained by the casting method. The effects of FCNs loading on the morphology, thermal behaviour, mechanical properties and water sensitivity of the films were investigated by means of wide-angle X-ray diffraction, differential scanning calorimetry, tensile testing, and water absorption testing. Scanning electron microscopy photographs of the failure surfaces clearly demonstrated a homogeneous dispersion of FCNs within the PS matrix and strong interfacial adherence between matrix and fillers, which led to an increase of glass transition temperature ascribed to the starch molecular chains in the starch-rich phase. In particular, these nanocomposite films exhibited a significant increase in tensile strength and Young’s modulus from 3.9 to 11.9 MPa and from 31.9 to 498.2 MPa, respectively, with increasing FCNs content from 0 to 30 wt%. Also, with a loading of FCNs, the resulting nanocomposite films showed a higher water resistance. Therefore, FCNs played an important role in improving the mechanical properties and water resistance of the starch-based materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Elastic modulus and stress-transfer properties of tunicate cellulose whiskers
Šturcová, A., Davies, G. R., & Eichhorn, S. J. (2005) · Biomacromolecules · doi:10.1021/bm049291k · Cited by 953
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Journal of Polymer Science Part B: Polymer Physics
(2006) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/(issn)1099-0488 · Cited by 670
Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Helbert, W., Cavaillé, J. Y., & Dufresne, A. (1996) · Polymer Composites · doi:10.1002/pc.10650 · Cited by 473
New Nanocomposite Materials Reinforced with Flax Cellulose Nanocrystals in Waterborne Polyurethane
Cao, X., Dong, H., & Li, C. M. (2007) · Biomacromolecules · doi:10.1021/bm0610368 · Cited by 462
Self-citationLjungberg, N., Bonini, C., Bortolussi, F., Boisson, C., Heux, L., & Cavaillé (2005) · Biomacromolecules · doi:10.1021/bm050222v · Cited by 395
Morphological investigation of nanocomposites from sorbitol plasticized starch and tunicin whiskers
Mathew, A. P., & Dufresne, A. (2002) · Biomacromolecules · doi:10.1021/bm0101769 · Cited by 384
Macromolecular Materials and Engineering
(2006) · Macromolecular Materials and Engineering · doi:10.1002/(issn)1439-2054 · Cited by 384
Thermoplastic starch–clay nanocomposites and their characteristics
Chen, B., & Evans, J. R. G. (2005) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.06.020 · Cited by 318
Lu, Y., Weng, L., & Cao, X. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.08.027 · Cited by 312
Self-citationChen, Y., Cao, X., Chang, P. R., & Huneault, M. A. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.10.015 · Cited by 310
Self-citationPolysaccharide Microcrystals Reinforced Amorphous Poly(β-hydroxyoctanoate) Nanocomposite Materials
Dubief, D., Samain, E., & Dufresne, A. (1999) · Macromolecules · doi:10.1021/ma990274a · Cited by 259
Effects of Cellulose Whiskers on Properties of Soy Protein Thermoplastics
Wang, Y., Cao, X., & Zhang, L. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600034 · Cited by 229
Self-citationViscoelastic properties of plasticized PVC reinforced with cellulose whiskers
Chazeau, L., Cavaill�, J. Y., Canova, G., Dendievel, R., & Boutherin, B. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990314)71:11<1797::aid-app9>3.0.co;2-e · Cited by 221
Kiatkamjornwong, S., Mongkolsawat, K., & Sonsuk, M. (2002) · Polymer · doi:10.1016/s0032-3861(02)00224-0 · Cited by 203
Formation of starch films with varying crystallinity
Rindlava, Å., Hulleman, S. H. D., & Gatenholma, P. (1997) · Carbohydrate Polymers · doi:10.1016/s0144-8617(97)00093-3 · Cited by 174
Mechanical properties of silk fibroin–microcrystalline cellulose composite films
Noishiki, Y., Nishiyama, Y., Wada, M., Kuga, S., & Magoshi, J. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11370 · Cited by 173
Santayanon, R., & Wootthikanokkhan, J. (2002) · Carbohydrate Polymers · doi:10.1016/s0144-8617(02)00109-1 · Cited by 124
Preparation and properties of plasticized starch/multiwalled carbon nanotubes composites
Cao, X., Chen, Y., Chang, P. R., & Huneault, M. A. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26799 · Cited by 86
Self-citationLepifre, S., Froment, M., Cazaux, F., Houot, S., Lourdin, D., Coqueret, X., Lapierre, C., & Baumberger, S. (2004) · Biomacromolecules · doi:10.1021/bm040005e · Cited by 75
Cao, X., Chang, P. R., & Huneault, M. A. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.023 · Cited by 63
Self-citationEffect of chitin addition on injection‐molded thermoplastic corn starch
Rosa, R. C. R. S., & Andrade, C. T. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20292 · Cited by 28
Miscibility and properties of polyurethane/benzyl starch semi‐interpenetrating polymer networks
Cao, X., & Zhang, L. (2005) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20356 · Cited by 20
Self-citationCao, X., Wang, Y., & Zhang, L. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500084 · Cited by 8
Self-citationMohanty (2000) · doi:10.1002/(sici)1439-2054(20000301)276:1
Cited by
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Green composites from sustainable cellulose nanofibrils: A review
Abdul Khalil, H. P. S., Bhat, A. H., & Ireana Yusra, A. F. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.078 · Cited by 1,573
Key advances in the chemical modification of nanocelluloses
Habibi, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60204d · Cited by 1,561
Metadata
- Authors
- Cao, X., Chen, Y., Chang, P. R., Muir, A. D., & Falk, G.
- Venue
- Express Polymer Letters
- Published
- 2008
- Volume
- 2
- Issue
- 7
- Pages
- 502-510
- ISSN
- 1788-618X (ISSN-L)
- OpenAlex
- W2035333273
- Cited by
- 256
- References
- 28
- FWCI
- 3.72
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.