The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Starch-based nanocomposites reinforced with flax cellulose nanocrystals
Open accessAbstract
In this study, the cellulose crystals, prepared by acid hydrolysis of flax fiber, consisted of slender rods with lengths ranging from 100 to 500 nm and diameters ranging from 10 to 30 nm, respectively. After mixing the suspension of flax cellulose nanocrystals (FCNs) and plasticized starch (PS), the nanocomposite films were obtained by the casting method. The effects of FCNs loading on the morphology, thermal behaviour, mechanical properties and water sensitivity of the films were investigated by means of wide-angle X-ray diffraction, differential scanning calorimetry, tensile testing, and water absorption testing. Scanning electron microscopy photographs of the failure surfaces clearly demonstrated a homogeneous dispersion of FCNs within the PS matrix and strong interfacial adherence between matrix and fillers, which led to an increase of glass transition temperature ascribed to the starch molecular chains in the starch-rich phase. In particular, these nanocomposite films exhibited a significant increase in tensile strength and Young’s modulus from 3.9 to 11.9 MPa and from 31.9 to 498.2 MPa, respectively, with increasing FCNs content from 0 to 30 wt%. Also, with a loading of FCNs, the resulting nanocomposite films showed a higher water resistance. Therefore, FCNs played an important role in improving the mechanical properties and water resistance of the starch-based materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Elastic modulus and stress-transfer properties of tunicate cellulose whiskers
Šturcová, A., Davies, G. R., & Eichhorn, S. J. (2005) · Biomacromolecules · doi:10.1021/bm049291k · Cited by 953
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Journal of Polymer Science Part B: Polymer Physics
(2006) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/(issn)1099-0488 · Cited by 670
Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Helbert, W., Cavaillé, J. Y., & Dufresne, A. (1996) · Polymer Composites · doi:10.1002/pc.10650 · Cited by 473
New Nanocomposite Materials Reinforced with Flax Cellulose Nanocrystals in Waterborne Polyurethane
Cao, X., Dong, H., & Li, C. M. (2007) · Biomacromolecules · doi:10.1021/bm0610368 · Cited by 462
Self-citationLjungberg, N., Bonini, C., Bortolussi, F., Boisson, C., Heux, L., & Cavaillé (2005) · Biomacromolecules · doi:10.1021/bm050222v · Cited by 395
Morphological investigation of nanocomposites from sorbitol plasticized starch and tunicin whiskers
Mathew, A. P., & Dufresne, A. (2002) · Biomacromolecules · doi:10.1021/bm0101769 · Cited by 384
Cited by
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Green composites from sustainable cellulose nanofibrils: A review
Abdul Khalil, H. P. S., Bhat, A. H., & Ireana Yusra, A. F. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.078 · Cited by 1,573
Key advances in the chemical modification of nanocelluloses
Habibi, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60204d · Cited by 1,561
Production of nanocrystalline cellulose from lignocellulosic biomass: Technology and applications
Brinchi, L., Cotana, F., Fortunati, E., & Kenny, J. M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.033 · Cited by 1,121
Biobased plastics and bionanocomposites: Current status and future opportunities
Reddy, M. M., Vivekanandhan, S., Misra, M., Bhatia, S. K., & Mohanty, A. K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.006 · Cited by 1,080
Nanotechnology in agri-food production: an overview
Sekhon, B. (2014) · Nanotechnology, Science and Applications · doi:10.2147/nsa.s39406 · Cited by 1,073
Xu, X., Liu, F., Jiang, L., Zhu, J. Y., Haagenson, D., & Wiesenborn, D. P. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302624t · Cited by 1,002
Cellulose nanocrystals and related nanocomposites: Review of some properties and challenges
Mariano, M., El Kissi, N., & Dufresne, A. (2014) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23490 · Cited by 933
Cellulose nanowhiskers: promising materials for advanced applications
Eichhorn, S. J. (2011) · Soft Matter · doi:10.1039/c0sm00142b · Cited by 782
Starch-based completely biodegradable polymer materials
Lu, D. R., Xiao, C. M., & Xu, S. J. (2009) · Express Polymer Letters · doi:10.3144/expresspolymlett.2009.46 · Cited by 735
Khan, A., Khan, R. A., Salmieri, S., Le Tien, C., Riedl, B., Bouchard, J., Chauve, G., Tan, V., Kamal, M. R., & Lacroix, M. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.07.037 · Cited by 677
Starch-based nano-biocomposites
Xie, F., Pollet, E., Halley, P. J., & Avérous, L. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.002 · Cited by 550
Kargarzadeh, H., Huang, J., Lin, N., Ahmad, I., Mariano, M., Dufresne, A., Thomas, S., & Gałęski, A. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.008 · Cited by 496
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.002 · Cited by 448
Plant-derived nanostructures: types and applications
Mohammadinejad, R., Karimi, S., Iravani, S., & Varma, R. S. (2016) · Green Chemistry · doi:10.1039/c5gc01403d · Cited by 437
Vahedikia, N., Garavand, F., Tajeddin, B., Cacciotti, I., Jafari, S. M., Omidi, T., & Zahedi, Z. (2019) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2019.01.045 · Cited by 437
A review of nanocellulose as a new material towards environmental sustainability
Dhali, K., Ghasemlou, M., Daver, F., Cass, P., & Adhikari, B. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.145871 · Cited by 417
A critical review on cellulose: From fundamental to an approach on sensor technology
Ummartyotin, S., & Manuspiya, H. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.08.050 · Cited by 327
Advantages and Disadvantages of Bioplastics Production from Starch and Lignocellulosic Components
Abe, M. M., Martins, J. R., Sanvezzo, P. B., Macedo, J. V., Branciforti, M. C., Halley, P., Botaro, V. R., & Brienzo, M. (2021) · Polymers · doi:10.3390/polym13152484 · Cited by 269
Biocomposites reinforced with cellulose nanocrystals derived from potato peel waste
Chen, D., Lawton, D., Thompson, M. R., & Liu, Q. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.06.002 · Cited by 265
Metadata
- Authors
- Cao, X., Chen, Y., Chang, P. R., Muir, A. D., & Falk, G.
- Venue
- Express Polymer Letters
- Published
- 2008
- Volume
- 2
- Issue
- 7
- Pages
- 502-510
- ISSN
- 1788-618X (ISSN-L)
- OpenAlex
- W2035333273
- Cited by
- 256
- References
- 28
- FWCI
- 3.72
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.