The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.
Polyhydroxyalkanoate (PHA): Review of synthesis, characteristics, processing and potential applications in packaging
Open accessAbstract
Polyhydroxyalkanoates (PHAs) are gaining increasing attention in the biodegradable polymer market due to their promising properties such as high biodegradability in different environments, not just in composting plants, and processing versatility.Indeed among biopolymers, these biogenic polyesters represent a potential sustainable replacement for fossil fuel-based thermoplastics.Most commercially available PHAs are obtained with pure microbial cultures grown on renewable feedstocks (i.e.glucose) under sterile conditions but recent research studies focus on the use of wastes as growth media.PHA can be extracted from the bacteria cell and then formulated and processed by extrusion for production of rigid and flexible plastic suitable not just for the most assessed medical applications but also considered for applications including packaging, moulded goods, paper coatings, non-woven fabrics, adhesives, films and performance additives.The present paper reviews the different classes of PHAs, their main properties, processing aspects, commercially available ones, as well as limitations and related improvements being researched, with specific focus on potential applications of PHAs in packaging.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,151
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Tokiwa, Y., Calabia, B. P., Ugwu, C. U., & Aiba, S. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10093722 · Cited by 1,782
Mark, J. E. (2009) · Cited by 1,658
Polyhydroxyalkanoates: an overview
Reddy, C. S. K., Ghai, R., Rashmi, & Kalia, V. C. (2003) · Bioresource Technology · doi:10.1016/s0960-8524(02)00212-2 · Cited by 1,151
Factors limiting bioremediation technologies
Boopathy, R. (2000) · Bioresource Technology · doi:10.1016/s0960-8524(99)00144-3 · Cited by 1,038
The Role and Regulation of Energy Reserve Polymers in Micro-organisms
Dawes, E. A., & Senior, P. J. (1973) · Advances in Microbial Physiology · doi:10.1016/s0065-2911(08)60088-0 · Cited by 857
Applications of PHB - a microbially produced biodegradable thermoplastic
Holmes, P. A. (1985) · Physics in Technology · doi:10.1088/0305-4624/16/1/305 · Cited by 824
Bacterial polyhydroxyalkanoates
Lee, S. Y. (2000) · Biotechnology and Bioengineering · doi:10.1002/(sici)1097-0290(19960105)49:1<1::aid-bit1>3.0.co;2-p · Cited by 779
Reversible crystallization and the rigid–amorphous phase in semicrystalline macromolecules
Wunderlich, B. (2003) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00085-0 · Cited by 682
The Chemomechanical Properties of Microbial Polyhydroxyalkanoates
Laycock, B., Halley, P., Pratt, S., Werker, A., & Lant, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.003 · Cited by 604
Plastic bacteria? Progress and prospects for polyhydroxyalkanoate production in bacteria
Lee, S. Y. (1996) · Trends in Biotechnology · doi:10.1016/0167-7799(96)10061-5 · Cited by 529
El-Hadi, A., Schnabel, R., Straube, E., Müller, G., & Henning, S. (2002) · Polymer Testing · doi:10.1016/s0142-9418(01)00142-8 · Cited by 481
Lepoittevin, B., Devalckenaere, M., Pantoustier, N., Alexandre, M., Kubies, D., Calberg, C., Jérôme, R., & Dubois, P. (2002) · Polymer · doi:10.1016/s0032-3861(02)00229-x · Cited by 411
Avella, M., Martuscelli, E., & Raimo, M. (2000) · Journal of Materials Science · doi:10.1023/a:1004740522751 · Cited by 357
Polyhydroxyalkanoate (PHA) scaffolds with good mechanical properties and biocompatibility
Zhao, K., Deng, Y., Chun Chen, J., & Chen, G.-Q. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00426-x · Cited by 318
PHB packaging for the storage of food products
Bucci, D. Z., Tavares, L. B. B., & Sell, I. (2005) · Polymer Testing · doi:10.1016/j.polymertesting.2005.02.008 · Cited by 280
Nishida, H., & Tokiwa, Y. (1993) · Journal of Environmental Polymer Degradation · doi:10.1007/bf01458031 · Cited by 279
Brandl, H., Gross, R. A., Lenz, R. W., & Fuller, R. C. (2005) · Advances in Biochemical Engineering/Biotechnology · doi:10.1007/bfb0010232 · Cited by 272
The thermal degradation of poly(-(d)-β-hydroxybutyric acid): Part 2—Changes in molecular weight
Grassie, N., Murray, E. J., & Holmes, P. A. (1984) · Polymer Degradation and Stability · doi:10.1016/0141-3910(84)90075-2 · Cited by 270
Wood fiber reinforced bacterial bioplastic composites: Fabrication and performance evaluation
SINGH, S., & MOHANTY, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.11.009 · Cited by 268
de Koning, G. J. M., & Lemstra, P. J. (1993) · Polymer · doi:10.1016/0032-3861(93)90671-v · Cited by 257
Grassie, N., Murray, E. J., & Holmes, P. A. (1984) · Polymer Degradation and Stability · doi:10.1016/0141-3910(84)90016-8 · Cited by 235
Properties of biocomposites based on lignocellulosic fillers
Avérous, L., & Le Digabel, F. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.04.004 · Cited by 230
Analysis of the plastic-bag levy in South Africa
Dikgang, J., Leiman, A., & Visser, M. (2012) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2012.06.009 · Cited by 218
Suyama, T., Tokiwa, Y., Ouichanpagdee, P., Kanagawa, T., & Kamagata, Y. (1998) · Applied and Environmental Microbiology · doi:10.1128/aem.64.12.5008-5011.1998 · Cited by 216
Scandola, M., Focarete, M. L., Adamus, G., Sikorska, W., Baranowska, I., Świerczek, S., Gnatowski, M., Kowalczuk, M., & Jedliński, Z. (1997) · Macromolecules · doi:10.1021/ma961431y · Cited by 198
Plastics materials flow analysis for India
Mutha, N. H., Patel, M., & Premnath, V. (2006) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2005.09.003 · Cited by 177
Miscibility of binary blends of poly[(R)-3-hydroxybutyric acid] and poly[(S)-lactic acid]
Koyama, N., & Doi, Y. (1997) · Polymer · doi:10.1016/s0032-3861(96)00685-4 · Cited by 175
Thermal degradation of poly(3-hydroxybutyrate) plasticized with acetyl tributyl citrate
Erceg, M., Kovačić, T., & Klarić, I. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.04.048 · Cited by 165
Assessment of PHB with varying hydroxyvalerate content for potential packaging applications
Modi, S., Koelling, K., & Vodovotz, Y. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2010.11.010 · Cited by 163
Gogolewski, S., Jovanovic, M., Perren, S. M., Dillon, J. G., & Hughes, M. K. (1993) · Polymer Degradation and Stability · doi:10.1016/0141-3910(93)90137-8 · Cited by 160
Poly-?-hydroxybutters�ure abbauende Bakterien und Exoenzym
Chowdhury, A. A. (1963) · Archives of Microbiology · doi:10.1007/bf00422523 · Cited by 149
Biodiversity of microorganisms that degrade bacterial and synthetic polyesters
Mergaert, J., & Swings, J. (1996) · Journal of Industrial Microbiology & Biotechnology · doi:10.1007/bf01574777 · Cited by 128
Parra, D. F., Fusaro, J., Gaboardi, F., & Rosa, D. D. S. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.02.008 · Cited by 127
Miscibility of bacterial poly(3-hydroxybutyrate) with cellulose esters
Scandola, M., Ceccorulli, G., & Pizzoli, M. (1992) · Macromolecules · doi:10.1021/ma00050a009 · Cited by 120
The Role of the Rigid Amorphous Fraction on Cold Crystallization of Poly(3-hydroxybutyrate)
Lorenzo, M. L. D., Gazzano, M., & Righetti, M. C. (2012) · Macromolecules · doi:10.1021/ma3010907 · Cited by 120
Effect of clay organomodifiers on degradation of polyhydroxyalkanoates
Bordes, P., Hablot, E., Pollet, É., & Avérous, L. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.01.027 · Cited by 112
Crystallization and thermal behaviour of poly (d(−) 3-hydroxybutyrate)/poly(epichlorohydrin) blends
Dubini-Paglia, E., Beltrame, P. L., Canetti, M., Seves, A., Marcandalli, B., & Martuscelli, E. (1993) · Polymer · doi:10.1016/0032-3861(93)90220-5 · Cited by 112
Physical properties of poly(β-hydroxybutyrate)-poly(ε-caprolactone) blends
Gassner, F., & Owen, A. J. (1994) · Polymer · doi:10.1016/0032-3861(94)90258-5 · Cited by 111
Processability modifications of poly(3‐hydroxybutyrate) by plasticizing, blending, and stabilizing
Wang, L., Zhu, W., Wang, X., Chen, X., Chen, G., & Xu, K. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.27004 · Cited by 111
The fractionated crystallization phenomenon in poly(3-hydroxybutyrate)/poly(ethylene oxide) blends
Avella, M., Martuscelli, E., & Raimo, M. (1993) · Polymer · doi:10.1016/0032-3861(93)90396-r · Cited by 106
Crystallization Kinetics and Morphology of Poly(3-hydroxybutyrate)/Cellulose Ester Blends
Pizzoli, M., Scandola, M., & Ceccorulli, G. (1994) · Macromolecules · doi:10.1021/ma00095a016 · Cited by 102
Degradation of polycaprolactone at 50 °C by a thermotolerant Aspergillus sp.
Sanchez, J. G., Tsuchii, A., & Tokiwa, Y. (2000) · Biotechnology Letters · doi:10.1023/a:1005603112688 · Cited by 100
Thermal properties and applications of low molecular weight polyhydroxybutyrate
Hong, S., Hsu, H., & Ye, M. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2503-3 · Cited by 93
Patricio, P. S. D. O., Pereira, F. V., dos Santos, M. C., de Souza, P. P., Roa, J. P. B., & Oréfice, R. L. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37811 · Cited by 88
Misra, S. K., Ohashi, F., Valappil, S. P., Knowles, J. C., Roy, I., Silva, S. R. P., Salih, V. M., & Boccaccini, A. R. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.023 · Cited by 81
Polyhydroxybutyrate, Its Copolymers and Blends
Sharma, R., & Ray, A. R. (1995) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15321799508009640 · Cited by 79
Bugnicourt, E., Schmid, M. C., McNerney, O., Wildner, J., Smykala, L., Lazzeri, A., & Cinelli, P. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/496207 · Cited by 78
Self-citationBiofunctionalization of Polymers and Their Applications
Chen, G. (2010) · Advances in biochemical engineering, biotechnology · doi:10.1007/10_2010_89 · Cited by 78
Polyester-degrading thermophilic actinomycetes isolated from different environment in Taiwan
Tseng, M., Hoang, K., Yang, M.-K., Yang, S.-F., & Chu, W. (2007) · Biodegradation · doi:10.1007/s10532-006-9089-z · Cited by 76
Biosynthesis and characterization of hydroxybutyrate-hydroxycaproate copolymers
Caballero, K. P., Karel, S. F., & Register, R. A. (1995) · International Journal of Biological Macromolecules · doi:10.1016/0141-8130(95)93522-y · Cited by 74
Mei, L. H. I., Bartoli, J. R., & Baltieri, R. C. (2003) · Macromolecular Symposia · doi:10.1002/masy.200350708 · Cited by 72
Microbial degradation of poly(d-3-hydroxybutyrate) by a new thermophilic Streptomyces isolate
Calabia, B. P., & Tokiwa, Y. (2003) · Biotechnology Letters · doi:10.1023/b:bile.0000009453.81444.51 · Cited by 72
Qiu, Y.-Z., Han, J., Guo, J.-J., & Chen, G. (2005) · Biotechnology Letters · doi:10.1007/s10529-005-3685-6 · Cited by 69
Kumagai, Y., & Doi, Y. (1992) · Polymer Degradation and Stability · doi:10.1016/0141-3910(92)90167-4 · Cited by 69
Ahmed, T., Marçal, H., Lawless, M., Wanandy, N. S., Chiu, A., & Foster, L. J. R. (2010) · Biomacromolecules · doi:10.1021/bm1007579 · Cited by 66
Abe, H., Doi, Y., & Kumagai, Y. (1994) · Macromolecules · doi:10.1021/ma00099a012 · Cited by 58
Lorenzo, M. L. D., Raimo, M., Cascone, E., et al. (2001) · Journal of Macromolecular Science Part B · doi:10.1081/mb-100107554 · Cited by 53
Scandola, M., Ceccorulli, G., & Doi, Y. (1990) · International Journal of Biological Macromolecules · doi:10.1016/0141-8130(90)90062-f · Cited by 52
Sustainable Consumption and Production of Plastics?
Mulder, K. (1998) · Technological Forecasting and Social Change · doi:10.1016/s0040-1625(97)00129-7 · Cited by 50
Biodegradable polymer blends of poly(3-hydroxybutyrate) and hydroxyethyl cellulose acetate
Zhang, L., Deng, X., Zhao, S., & Huang, Z. (1997) · Polymer · doi:10.1016/s0032-3861(97)00158-4 · Cited by 50
Corrêa, M. C. S., Branciforti, M. C., Pollet, É., Agnelli, J. A. M., Nascente, P. A. P., & Avérous, L. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0379-0 · Cited by 46
Biodegradation of Biosynthetic and Chemosynthetic Polyhydroxyalkanoates
Doi, Y., Mukai, K., Kasuya, K., & Yamada, K. (1994) · Studies in polymer science · doi:10.1016/b978-0-444-81708-2.50010-5 · Cited by 43
Zhu, C., Nomura, C. T., Perrotta, J. A., Stipanovic, A. J., & Nakas, J. P. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.03.004 · Cited by 38
Choi, H. J., Kim, J.-H., & Jhon, M. S. (1999) · Polymer · doi:10.1016/s0032-3861(98)00627-2 · Cited by 36
Irregularly shaped DSC exotherms in the analysis of polymer crystallization
Lorenzo, M. L. D., Sajkiewicz, P., Pietra, P. L., & Gradys, A. (2006) · Polymer Bulletin · doi:10.1007/s00289-006-0621-4 · Cited by 36
Processing and Properties of Biopolymer/Polyhydroxyalkanoates Blends
Scaffaro, R., Dintcheva, N. T., Marino, R., & Mantia, F. P. L. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0385-2 · Cited by 34
Overview on Polyhydroxyalkanoates: A Promising Biopol
R, V. Y. S. (2011) · Journal of Microbial & Biochemical Technology · doi:10.4172/1948-5948.1000059 · Cited by 34
Biological recycling of plastics containing ester bonds
Tokiwa, Y., Iwamoto, A., Koyama, M., 片岡, 直., & Nishida, H. (1992) · Makromolekulare Chemie Macromolecular Symposia · doi:10.1002/masy.19920570125 · Cited by 30
Mechanical spectroscopy study on biodegradable synthetic and biosynthetic aliphatic polyesters
Choi, H. J., Kim, J. H., Kim, J.-H., et al. (1997) · Macromolecular Symposia · doi:10.1002/masy.19971190115 · Cited by 22
Modi, S. J. (2010) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 16
Cited by
Naser, A. Z., Deiab, I., & Darras, B. M. (2021) · RSC Advances · doi:10.1039/d1ra02390j · Cited by 836
Scientific, sustainability and regulatory challenges of cultured meat
Post, M. J., Levenberg, S., Kaplan, D. L., Genovese, N., Fu, J., Bryant, C. J., Negowetti, N., Verzijden, K., & Moutsatsou, P. (2020) · Nature Food · doi:10.1038/s43016-020-0112-z · Cited by 783
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Recent Advances and Challenges towards Sustainable Polyhydroxyalkanoate (PHA) Production
Kourmentza, C., Plácido, J., Venetsaneas, N., Burniol-Figols, A., Varrone, C., Gavala, H. N., & Reis, M. A. M. (2017) · Bioengineering · doi:10.3390/bioengineering4020055 · Cited by 779
Polyhydroxyalkanoates: Characteristics, production, recent developments and applications
Raza, Z. A., Abid, S., & Banat, I. M. (2018) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2017.10.001 · Cited by 708
Metadata
- Authors
- Bugnicourt, E., Cinelli, P., Lazzeri, A., & Alvarez, V.
- Venue
- Express Polymer Letters
- Published
- 2014
- Volume
- 8
- Issue
- 11
- Pages
- 791-808
- ISSN
- 1788-618X (ISSN-L)
- OpenAlex
- W2077606207
- Cited by
- 943
- References
- 72
- FWCI
- 14.46
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.