Direct correlation between modulus and the crystalline structure in isotactic polypropylene
Open accessThe DOI matches its Crossref record.
Abstract
Mechanical properties and crystalline structure of isotactic polypropylene (iPP) types were studied using polymers, which were polymerized differently in order to obtain diverse molecular architectures.The objective of this work is to describe quantitative correlation between the crystalline structure and the elastic modulus in order to predict structures with expectably advantageous properties.The molecular mass was measured by gel permeation chromatography (GPC) and the regularity of molecular structure was investigated by Fourier transform infrared spectroscopy (FTIR) and stepwise isothermal segregation technique (SIST).The chain regularity of the studied samples is varying in a wide range according to the results of SIST and FTIR measurements.The crystalline structure was characterized by differential scanning calorimetry (DSC) and wide angle X-ray scattering (WAXS).The tensile properties were determined by standardized tensile tests.The results indicate clearly that the increased chain regularity is accompanied by a proportional advancement in crystallinity and consequently proportionally larger stiffness.Moreover, the results of this work were compared to those obtained on other previously produced iPP samples and it can be established that the correlations found during this work are valid generally.An empirical model was developed also, which connects the stiffness to the structural parameters of iPP and makes possible the design and prediction of materials with targeted molecular structure and properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Bartczak, Z., Grala, M., Richaud, E., & Gadzinowska, K. (2016) · Polymer · doi:10.1016/j.polymer.2016.07.068 · Cited by 23
Rahvar, M., Ahmadi Lakalayeh, G., Nazeri, N., Marouf, B. T., Shirzad, M., Najafi T. Shabankareh, A., & Ghanbari, H. (2021) · Biomedical Engineering Letters · doi:10.1007/s13534-021-00205-9 · Cited by 15
Soft, Formstable (Co)Polyester Blend Elastomers
Neffe, A., Izraylit, V., Hommes-Schattmann, P., & Lendlein, A. (2021) · Nanomaterials · doi:10.3390/nano11061472 · Cited by 9
Metadata
- Authors
- Menyhard, A., Suba, P., Laszlo, Z., Fekete, H. M., Mester, A. O., Horvath, Z., Voros, G., Varga, J., & Moczo, J.
- Venue
- Express Polymer Letters
- Published
- 2015
- Volume
- 9
- Issue
- 3
- Pages
- 308-320
- ISSN
- 1788-618X (ISSN-L)
- OpenAlex
- W2335213579
- Cited by
- 69
- References
- 0
- FWCI
- 3.38
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.