The DOI matches its Crossref record; 263 of the 263 references it cites were found in a registry or an index.
A review on gasification and pyrolysis of waste plastics
Open accessAbstract
Gasification and pyrolysis are thermal processes for converting carbonaceous substances into tar, ash, coke, char, and gas. Pyrolysis produces products such as char, tar, and gas, while gasification transforms carbon-containing products (e.g., the products from pyrolysis) into a primarily gaseous product. The composition of the products and their relative quantities are highly dependent on the configuration of the overall process and on the input fuel. Although in gasification, pyrolysis processes also occur in many cases (yet prior to the gasification processes), gasification is a common description for the overall technology. Pyrolysis, on the other hand, can be used without going through the gasification process. The current study evaluates the most common waste plastics valorization routes for producing gaseous and liquid products, as well as the key process specifications that affected the end final products. The reactor type, temperatures, residence time, pressure, the fluidizing gas type, the flow rate, and catalysts were all investigated in this study. Pyrolysis and waste gasification, on the other hand, are expected to become more common in the future. One explanation for this is that public opinion on the incineration of waste in some countries is a main impediment to the development of new incineration capacity. However, an exceptional capability of gasification and pyrolysis over incineration to conserve waste chemical energy is also essential.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–263 of 263
Mo, Y., Zhao, L., Wang, Z. J., Chen, C.-L., Tan, G.-Y. A., & Wang, J. (2014) · Waste Management · doi:10.1016/j.wasman.2014.01.005 · Cited by 73
Cho, M.-H., Choi, Y.-K., & Kim, J.-S. (2015) · Energy · doi:10.1016/j.energy.2015.05.026 · Cited by 72
Hu, Q., Cheng, W. L., Mao, Q., Hu, J., Yang, H., & Chen, H. (2021) · Fuel · doi:10.1016/j.fuel.2021.122789 · Cited by 71
Berrueco, C., Mastral, J. F., Esperanza, E., & Ceamanos, J. (2002) · Energy & Fuels · doi:10.1021/ef020008p · Cited by 70
Catalytic cracking of heavy fractions from the pyrolysis of waste HDPE and PP
Lovás, P., Hudec, P., Jambor, B., Hájeková, E., & Horňáček, M. (2017) · Fuel · doi:10.1016/j.fuel.2017.04.128 · Cited by 70
Role of Temperature in the Biomass Steam Pyrolysis in a Conical Spouted Bed Reactor
Fernandez, E., Santamaria, L., Amutio, M., Artetxe, M., Arregi, A., López, G., Bilbao, J., & Olazar, M. (2021) · Energy · doi:10.1016/j.energy.2021.122053 · Cited by 70
Wu, C., & Williams, P. T. (2009) · Energy & Fuels · doi:10.1021/ef900278w · Cited by 68
Lee, K.-H. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.04.009 · Cited by 68
Experimental test on a novel dual fluidised bed biomass gasifier for synthetic fuel production
Göransson, K., Söderlind, U., & Zhang, W. (2011) · Fuel · doi:10.1016/j.fuel.2010.12.035 · Cited by 68
Wu, C., & Williams, P. T. (2008) · Energy & Fuels · doi:10.1021/ef800574w · Cited by 65
Sancho, J. A., Aznar, M., & Toledo, J. M. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie071023q · Cited by 64
A novel integrated process for hydrogen production from biomass
Ma, Z., Zhang, S., Xie, D., & Yan, Y. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.10.146 · Cited by 61
Toledo, J. M., Aznar, M., & Sancho, J. A. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200145p · Cited by 61
Steam reforming of plastic pyrolysis model hydrocarbons and catalyst deactivation
Barbarias, I., López, G., Amutio, M., Artetxe, M., Álvarez, J., Arregi, A., Bilbao, J., & Olazar, M. (2016) · Applied Catalysis A General · doi:10.1016/j.apcata.2016.09.003 · Cited by 60
Jung, S.-H., Kim, S., & Kim, J.-S. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2013.05.004 · Cited by 59
Synthetic Lubricants Derived from Plastic Waste and their Tribological Performance
Hackler, R. A., Vyavhare, K., Kennedy, R. M., Çelik, G., Kanbur, U., Griffin, P. J., Sadow, A. D., Zang, G., Elgowainy, A., Sun, P., et al. (2021) · ChemSusChem · doi:10.1002/cssc.202100912 · Cited by 59
Co-gasification of wastewater sludge and different feedstock: Feasibility study
Akkache, S., Hernández, A. B., Teixeira, G., Gelix, F., Roche, N., & Ferrasse, J. (2016) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2016.03.003 · Cited by 58
Guo, X., Zhang, W., Wang, L., & Hao, J. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.04.018 · Cited by 57
Current status and future roles of additives in 3D printing—A perspective
Thompson, M. S. (2022) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.21887 · Cited by 57
The O2-enriched air gasification of coal, plastics and wood in a fluidized bed reactor
Mastellone, M. L., Zaccariello, L., Santoro, D., & Arena, U. (2011) · Waste Management · doi:10.1016/j.wasman.2011.09.005 · Cited by 56
Fluidized bed gasification of industrial solid recovered fuels
Arena, U., & Gregorio, F. D. (2016) · Waste Management · doi:10.1016/j.wasman.2016.02.011 · Cited by 56
Thermal and catalytic degradation of waste high-density polyethylene (HDPE) using spent FCC catalyst
Lee, K.-H., Jeon, S.-G., Kim, K. H., et al. (2003) · Korean Journal of Chemical Engineering · doi:10.1007/bf02706909 · Cited by 53
Case studies––Problem solving in fluidized bed waste fuel incineration
Yan, R., Liang, D. T., & Tsen, L. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.06.021 · Cited by 51
Cho, M.-H., Mun, T., Choi, Y.-K., & Kim, J.-S. (2014) · Energy · doi:10.1016/j.energy.2014.03.097 · Cited by 51
Bilitewski, B., Härdtle, G., & Marek, K. (1997) · Springer eBooks · doi:10.1007/978-3-662-03382-1 · Cited by 51
Baloch, H. A., Yang, T., Li, R., Nizamuddin, S., Kai, X., & Bhutto, A. W. (2016) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-016-1092-4 · Cited by 50
Hydrogen-rich gas as a product of two-stage co-gasification of lignite/waste plastics mixtures
Straka, P., & Bičáková, O. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.05.054 · Cited by 48
Generalized van der Waals-Berthelot equation of state
Sobko, A. A. (2008) · Doklady Physics · doi:10.1134/s1028335808080028 · Cited by 47
Microwave Pyrolysis of Plastic
Khaghanikavkani, E. (2013) · Journal of Chemical Engineering & Process Technology · doi:10.4172/2157-7048.1000150 · Cited by 45
Cracking of plastic pyrolysis oil over FCC equilibrium catalysts to produce fuels: Kinetic modeling
Palos, R., Rodríguez, E., Gutiérrez, A., Bilbao, J., & Arandes, J. M. (2022) · Fuel · doi:10.1016/j.fuel.2022.123341 · Cited by 45
Marcilla, A. F., Hernández, M. D. R., & García, A. N. J. (2006) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.10.017 · Cited by 44
Park, J. H., Park, H.-W., Choi, S., & Park, D.-W. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.07.199 · Cited by 44
Conversion of Waste Plastic to Oils for Tribological Applications
Sikdar, S., Siddaiah, A., & Menezes, P. L. (2020) · Lubricants · doi:10.3390/lubricants8080078 · Cited by 44
Gasification of waste plastics by steam reforming in a fluidized bed
Tsuji, T., & Hatayama, A. (2009) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-008-0227-z · Cited by 43
Spouted bed gasification of western canadian coals
Foong, S. K., Cheng, G., & Watkinson, A. P. (1981) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450590511 · Cited by 42
Hydrogen from the two-stage pyrolysis of bituminous coal/waste plastics mixtures
Kříž, V., & Bičáková, O. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.03.136 · Cited by 41
NiO/Dolomite Catalyzed Steam/O2 Gasification of Different Plastics and Their Mixtures
Friengfung, P., Jamkrajang, E., Sunphorka, S., Kuchonthara, P., & Mekasut, L. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie401893s · Cited by 41
Bajad, G. S., P., V. R., Gupta, A. G., Jagtap, V., & Singh, Y. P. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.04.016 · Cited by 41
Gas production by steam gasification of polypropylene/biomass waste composites in a dual-bed reactor
Parparita, E., Uddin, M. A., Watanabe, T., Kato, Y., Yanık, J., & Vasile, C. (2014) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-014-0308-0 · Cited by 40
Cogasification of Polyethylene and Lignite in a Dual Fluidized Bed Gasifier
Kern, S. J., Pfeifer, C., & Hofbauer, H. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie303453e · Cited by 39
Feasibility study of a spouted bed gasification plant
Bernocco, D., Bosio, B., & Arato, E. (2012) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2012.09.012 · Cited by 38
Catalytic degradation of polyethylene over SBA-16
Choi, S. J., Park, Y., Jeong, K., Kim, T., Chae, H., Park, S. H., Jeon, J., & Kim, S.-S. (2010) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-010-0281-9 · Cited by 37
Influence of fuel feeding positions on gasification in dual fluidized bed gasifiers
Wilk, V., Schmid, J. C., & Hofbauer, H. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2013.03.018 · Cited by 37
Microwave pyrolysis of polymeric materials
Undri, A., Rosi, L., Frediani, M., et al. (2011) · InTech eBooks · doi:10.5772/24008 · Cited by 36
Yang, R., Chuang, K., & Wey, M. (2016) · RSC Advances · doi:10.1039/c6ra04546d · Cited by 35
Lee, J. W., Yu, T. U., Lee, J. W., Moon, J. H., Jeong, H. J., Park, S., Yang, W. S., & Lee, U. (2013) · Energy & Fuels · doi:10.1021/ef301758z · Cited by 35
Coal gasification in a pressurized spouted bed
Sue-A-Quan, T. A., Cheng, G., & Watkinson, A. P. (1995) · Fuel · doi:10.1016/0016-2361(95)92649-q · Cited by 33
Thermal valorization of post-consumer film waste in a bubbling bed gasifier
Martínez-Lera, S., Torrico, J., Pallarés, J., & Gil, A. (2013) · Waste Management · doi:10.1016/j.wasman.2013.03.016 · Cited by 29
Methane-rich syngas production by gasification of thermoset waste plastics
Öngen, A. (2015) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-015-1071-1 · Cited by 28
Flash-Pyrolyzed Product Distribution of Major Plastics in a Batch Reactor.
Uemura, Y., AZEURA, M., Ohzuno, Y., et al. (2001) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.34.1293 · Cited by 27
Martínez-Lera, S., Torrico, J., Pallarés, J., & Gil, A. (2013) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-013-0129-6 · Cited by 27
Entrained Flow Plasma Gasification of Sewage Sludge–Proof-of-Concept and Fate of Inorganics
Vishwajeet, V., Pawlak-Kruczek, H., Baranowski, M., Czerep, M., Chorążyczewski, A., Krochmalny, K., Ostrycharczyk, M., Ziółkowski, P., Madejski, P., Mączka, T., et al. (2022) · Energies · doi:10.3390/en15051948 · Cited by 27
Tang, L., & Huang, H. (2007) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.01.013 · Cited by 24
Pyrolysis and gasification of landfilled plastic wastes with Ni− Mg− La/Al2O3catalyst
Kaewpengkrow, P. R., Atong, D., & Sricharoenchaikul, V. (2012) · Environmental Technology · doi:10.1080/09593330.2012.680918 · Cited by 24
Gasification of waste rigid polyurethane foam: optimizing operational conditions
Guo, X., Wang, L., Li, S., Tang, X., & Hao, J. (2014) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-014-0281-7 · Cited by 24
Rapid pyrolysis of Canadian coals in a miniature spouted bed reactor
Teo, K. C., & Watkinson, A. P. (1986) · Fuel · doi:10.1016/0016-2361(86)90204-8 · Cited by 20
McCullough, D. P., van Eyk, P. J., Ashman, P. J., & Mullinger, P. J. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b00367 · Cited by 19
A STUDY ON THE PYROLYSIS CHARACTERISTICS OF POLY ( VINYL CHLORIDE )
SoonJeongHong, SeaCheonOh, HaePyeongLee, HeeTaikKim, & KyongOkYoo (1999) · Korean Journal of Chemical Engineering · Cited by 17
Understand FCC matrix technology
Rajagopalan, K., Habib, E. T., & Co., C. (1992) · Hydrocarbon processing · Cited by 14
On the development of a polyolefin gasification modelling approach
Martínez-Lera, S., & Ranz, J. P. (2017) · Fuel · doi:10.1016/j.fuel.2017.02.032 · Cited by 14
Schneider, T., Moffitt, J., Volz, N., Müller, D., & Karl, J. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.118953 · Cited by 13
Zeolite components and matrix composition determine FCC catalyst performance
Humphries, A. P., & Wilcox, J. R. (1989) · Oil & gas journal/Oil and gas journal · Cited by 11
Research works printed but not linked: 32
- Aguado, 2005, Defluidization modelling of pyrolysis of plastics in a conical spouted bed reactor, Chem. Eng. Process. Process Intensif., 44, 231, 10.1016/j.cep.2004.02.016 · doi:10.1016/j.cep.2004.02.016
- Arabiourrutia, 2012, Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor, J. Anal. Appl. Pyrol, 94, 230, 10.1016/j.jaap.2011.12.012 · DOI · Paper page
- Artetxe, 2013, Cracking of high density polyethylene pyrolysis waxes on HZSM-5 catalysts of different acidity, Ind. Eng. Chem. Res., 52, 10637, 10.1021/ie4014869 · DOI · Paper page
- 2015, Polyvinyl chloride (PVC)
- Cepeliogullar, 2013, Utilization of two different types of plastic wastes from daily and industrial life, 1
- Fakhrhoseini, 2013, Predicting pyrolysis products of PE, 1
- Gibadullina, 2015, The creation of high temperature steam flow for plasma chemical gasification of polymer waste, Int. J. Appl. Eng. Res., 10, 45015
- He, 2009, Syngas production from catalytic gasification of waste polyethylene: Influence of temperature on gas yield and com-position, Int. J. Hydrog. Energy, 34, 1342, 10.1016/j.ijhydene.2008.12.023 · DOI · Paper page
- Hernández, 2007, Effect of the temperature in the nature and extension of the primary and secondary reactions in the thermal and HZSM-5 catalytic pyrolysis of HDPE, Appl. Catal. A Gen., 317, 183, 10.1016/j.apcata.2006.10.017 · DOI
- 2005, International zeolite association
- Iqbal, 2022, Long-term potentiodynamic testing and tribometric properties of amorphous alloy coatings under saline environment, Molecules, 27, 1421, 10.3390/molecules27041421 · doi:10.3390/molecules27041421
- Iqbal, 2020, Comparative analysis on the structure and properties of iron-based amorphous coating sprayed with the thermal spraying techniques, Coatings, 10, 1006, 10.3390/coatings10101006 · doi:10.3390/coatings10101006
- Kreith, 1998, The CRC handbook of mechanical engineering, 10.1201/NOE0849397516 · doi:10.1201/noe0849397516
- Marcilla, 2009, Thermal and catalytic pyrolysis of polyethylene over HZSM5 and HUSY zeolites in a batch reactor under dynamic conditions, Appl. Catal. B Environ., 86, 78, 10.1016/j.apcatb.2008.07.026 · DOI · Paper page
- Martínez-Lera, 2013, Thermal valorization of post-consumer film wastein a bubbling bed gasifier, Waste Manag., 33, 1640, 10.1016/j.wasman.2013.03.016 · DOI
- Mastellone, 2010, Co-gasification of coal, plastic waste and wood in a bubbling fluidized bed reactor, Fuel, 89, 2991, 10.1016/j.fuel.2010.05.019 · DOI · Paper page
- Mastral, 2006, Catalytic degradation of high density polyethylene over nanocrystalline HZSM-5 zeolite, Polym. Degr., 91, 3330, 10.1016/j.polymdegradstab.2006.06.009 · DOI · Paper page
- Michael, 2010, Plastic waste total in MSW
- Othman, 2008, Determination of physical and chemical characteristics of electronic plastic waste (Ep-Waste) resin using proximate and ultimate analysis method, 169
- Palos, 2022, Cracking of plastic pyrolysis oil over FCC equilibrium catalysts to produce fuels: Kinetic modeling, Fuel, 316, 123341, 10.1016/j.fuel.2022.123341 · DOI
- Pinto, 2009, Co-Gasification of coal and wastes in a pilot-scale installation 1: e ff ect of catalysts in syngas treatment to achieve tar abatement, Fuel, 88, 2392, 10.1016/j.fuel.2008.12.012 · DOI
- 2016, Plastics – the Facts 2016. An analysis of European plastics production
- Rutberg, 2013, Novel three-phase steam-air plasma torch for gasification of high-caloric waste, Appl. Energy, 108, 505, 10.1016/j.apenergy.2013.03.052 · DOI
- Saad, 2015, Influence of process conditions on syngas production from the thermal processing of waste high density polyethylene, J. Anal. Appl. Pyrolysis, 113, 35, 10.1016/j.jaap.2014.09.027 · DOI
- Shioya, 2005, Development of waste plastics liquefaction technology, feedstock recycling in Japan, 19
- Singh, 2022, Simulation of biomass-plastic co-gasification in a fluidized bed reactor using Aspen plus, 123708
- Straka, 2014, Hydrogen-rich gas as a product of two-stage co-gasification of lignite/waste plastics mixtures, Int. J. Hydrog. Energy, 39, 10987, 10.1016/j.ijhydene.2014.05.054 · DOI
- 2013, Chemical reactors. The essential chemical industry [online]
- Thimoteo, 2022, Açaí waste valorization via mannose and polyphenols production: Techno - economic and environmental assessmentBiomass Convers. Biorefinery, 0123456789, 10.1007/s13399-022-02681-0 · doi:10.1007/s13399-022-02681-0
- Wan Ho, 2015, Waste plastics into fuel oil?
- Wu, 2009, Hydrogen production from the pyrolysis/gasification of polypropylene: In fluence of steam flow rate, carrier gas flow rate and gasification temperature, Energy fuels, 23, 5055, 10.1021/ef900278w · DOI
- Zhang, 2016, Catalytic co-pyrolysis of lignocellulosic biomass with polymers: A critical review, Green Chem., 18, 4145, 10.1039/c6gc00911e · DOI · Paper page
Cited by
Sustainable Solutions Through Innovative Plastic Waste Recycling Technologies
Alaghemandi, M. (2024) · Sustainability · doi:10.3390/su162310401 · Cited by 163
Waste-derived carbon nanostructures (WD-CNs): An innovative step toward waste to treasury
Omar, R. A., Talreja, N., Chuhan, D., & Ashfaq, M. (2024) · Environmental Research · doi:10.1016/j.envres.2023.118096 · Cited by 25
Metadata
- Authors
- Shah, H. H., Amin, M., Iqbal, A., Nadeem, I., Kalin, M., Soomar, A. M., & Galal, A. M.
- Venue
- Frontiers in Chemistry
- Publisher
- Frontiers Media SA
- Published
- 2023-02-03
- Volume
- 10
- Pages
- 960894-960894
- ISSN
- 2296-2646 (ISSN-L)
- OpenAlex
- W4319080751
- Cited by
- 269
- References
- 263
- FWCI
- 19.73
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.