The DOI matches its Crossref record; 263 of the 263 references it cites were found in a registry or an index.
A review on gasification and pyrolysis of waste plastics
Open accessAbstract
Gasification and pyrolysis are thermal processes for converting carbonaceous substances into tar, ash, coke, char, and gas. Pyrolysis produces products such as char, tar, and gas, while gasification transforms carbon-containing products (e.g., the products from pyrolysis) into a primarily gaseous product. The composition of the products and their relative quantities are highly dependent on the configuration of the overall process and on the input fuel. Although in gasification, pyrolysis processes also occur in many cases (yet prior to the gasification processes), gasification is a common description for the overall technology. Pyrolysis, on the other hand, can be used without going through the gasification process. The current study evaluates the most common waste plastics valorization routes for producing gaseous and liquid products, as well as the key process specifications that affected the end final products. The reactor type, temperatures, residence time, pressure, the fluidizing gas type, the flow rate, and catalysts were all investigated in this study. Pyrolysis and waste gasification, on the other hand, are expected to become more common in the future. One explanation for this is that public opinion on the incineration of waste in some countries is a main impediment to the development of new incineration capacity. However, an exceptional capability of gasification and pyrolysis over incineration to conserve waste chemical energy is also essential.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
Elements of chemical reaction engineering
Scott Fogler, H. (1987) · Chemical Engineering Science · doi:10.1016/0009-2509(87)80130-6 · Cited by 3,110
Recycling and recovery routes of plastic solid waste (PSW): A review
Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2009) · Waste Management · doi:10.1016/j.wasman.2009.06.004 · Cited by 2,404
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
A review of the primary measures for tar elimination in biomass gasification processes
Devi, L., Ptasinski, K. J., & Janssen, F. J. J. G. (2003) · Biomass and Bioenergy · doi:10.1016/s0961-9534(02)00102-2 · Cited by 1,435
Process and technological aspects of municipal solid waste gasification. A review
Arena, U. (2012) · Waste Management · doi:10.1016/j.wasman.2011.09.025 · Cited by 1,349
Energy production from biomass (part 3): gasification technologies
McKendry, P. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00120-1 · Cited by 1,248
Biomass gasification technology: The state of the art overview
Molino, A., Chianese, S., & Musmarra, D. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2015.11.005 · Cited by 1,058
Thermal degradation of PVC: A review
Yu, J., Sun, L., Ma, C., Qiao, Y., & Yao, H. (2016) · Waste Management · doi:10.1016/j.wasman.2015.11.041 · Cited by 1,049
A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil
Abnisa, F., & Wan Daud, W. M. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.007 · Cited by 903
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Recent advances in the development of biomass gasification technology: A comprehensive review
Sansaniwal, S. K., Pal, K., Rosen, M. A., & Tyagi, S. K. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.038 · Cited by 846
Tar reduction in biomass producer gas via mechanical, catalytic and thermal methods: A review
Anis, S., & Zainal, Z. A. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.02.018 · Cited by 802
Aboulkas, A., El harfi, K., & El Bouadili, A. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.12.017 · Cited by 726
New concepts in biomass gasification
Heidenreich, S., & Foscolo, P. U. (2015) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2014.06.002 · Cited by 709
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Steam-gasification of biomass in a fluidised-bed of olivine particles
Rapagnà, S. (2000) · Biomass and Bioenergy · doi:10.1016/s0961-9534(00)00031-3 · Cited by 689
Onwudili, J. A., Insura, N., & Williams, P. T. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.07.008 · Cited by 681
Catalytic steam reforming of biomass tar: Prospects and challenges
Guan, G., Kaewpanha, M., Hao, X., & Abudula, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.316 · Cited by 662
Kunwar, B., Cheng, H. N., Chandrashekaran, S. R., & Sharma, B. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.015 · Cited by 639
Narváez, I., Orío, A., Aznar, M., & Corella, J. (1996) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9507540 · Cited by 637
Biomass gasification for sustainable energy production: A review
Tezer, Ö., Karabağ, N., Öngen, A., Colpan, C. O., & Ayol, A. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.02.158 · Cited by 584
Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons
Demirbas, A. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.03.001 · Cited by 579
Ahmad, A. A., Zawawi, N. A., Kasim, F. H., Inayat, A., & Khasri, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.030 · Cited by 566
Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.09.001 · Cited by 528
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
Pyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products
Ahmad, I., Khan, M. I., Khan, H., Ishaq, M., Tariq, R., Gul, K., & Ahmad, W. (2015) · International Journal of Green Energy · doi:10.1080/15435075.2014.880146 · Cited by 463
Gil, J., Corella, J., Aznar, M., & Caballero, M. A. (1999) · Biomass and Bioenergy · doi:10.1016/s0961-9534(99)00055-0 · Cited by 460
Energy from gasification of solid wastes
Belgiorno, V., De Feo, G., Della Rocca, C., & Napoli, R. M. A. (2003) · Waste Management · doi:10.1016/s0956-053x(02)00149-6 · Cited by 452
Jung, S.-H., Cho, M.-H., Kang, B.-S., & Kim, J.-S. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.10.009 · Cited by 440
Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock
Williams, P. T., & Williams, E. A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00011-x · Cited by 424
Catalytic steam reforming of bio-oil
Trane, R., Dahl, S., Skjøth-Rasmussen, M. S., & Jensen, A. D. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.01.023 · Cited by 401
Syamsiro, M., Saptoadi, H., Norsujianto, T., Noviasri, P., Cheng, S., Alimuddin, Z., & Yoshikawa, K. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.01.212 · Cited by 389
Catalytic pyrolysis of polyethylene
Bagri, R., & Williams, P. T. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00139-5 · Cited by 362
A Review on Waste to Energy Processes Using Microwave Pyrolysis
Lam, S. S., & Chase, H. A. (2012) · Energies · doi:10.3390/en5104209 · Cited by 350
Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor
Xue, Y., Zhou, S., Brown, R. C., Kelkar, A., & Bai, X. (2015) · Fuel · doi:10.1016/j.fuel.2015.04.033 · Cited by 348
Mastral, F. J., Esperanza, E., Garcı́a, P., & Juste, M. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00137-1 · Cited by 346
Influence of temperature on biomass pyrolysis in a conical spouted bed reactor
Amutio, M., Lopez, G., Artetxe, M., Elordi, G., Olazar, M., & Bilbao, J. (2012) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.04.002 · Cited by 345
Marcilla, A., Beltrán, M. I., & Navarro, R. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2008.07.026 · Cited by 333
Thermal and kinetic behaviors of biomass and plastic wastes in co-pyrolysis
Çepelioğullar, Ö., & Pütün, A. E. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.06.036 · Cited by 330
Miskolczi, N., Angyal, A., Bartha, L., & Valkai, I. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.04.019 · Cited by 315
Yao, D., Wu, C., Yang, H., Zhang, Y., Nahil, M. A., Chen, Y., Williams, P. T., & Chen, H. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.06.012 · Cited by 315
Hydrogen production by steam gasification of polypropylene with various nickel catalysts
Wu, C., & Williams, P. T. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2008.09.003 · Cited by 313
Fuels from Waste Plastics by Thermal and Catalytic Processes: A Review
Aguado, J., Serrano, D. P., & Escola, J. M. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800393w · Cited by 311
Sakata, Y., Uddin, M. A., & Muto, A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00013-3 · Cited by 305
Aznar, M. P., Caballero, M. A., Sancho, J. A., & Francés, E. (2006) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.09.006 · Cited by 304
Hydrogen production from biomass and plastic mixtures by pyrolysis-gasification
Alvarez, J., Kumagai, S., Wu, C., Yoshioka, T., Bilbao, J., Olazar, M., & Williams, P. T. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.04.189 · Cited by 303
Recovery of hydrocarbon liquid from waste high density polyethylene by thermal pyrolysis
Kumar, S., & Singh, R. K. (2011) · Brazilian Journal of Chemical Engineering · doi:10.1590/s0104-66322011000400011 · Cited by 297
Co-gasification study of biomass mixed with plastic wastes
Pinto, F., Franco, C., André, R. N., Miranda, M., Gulyurtlu, I., & Cabrita, I. (2002) · Fuel · doi:10.1016/s0016-2361(01)00164-8 · Cited by 295
Pinto, F., Franco, C., André, R. N., Tavares, C., Dias, M. ́., Gulyurtlu, I., & Cabrita, I. (2003) · Fuel · doi:10.1016/s0016-2361(03)00160-1 · Cited by 291
High temperature steam-only gasification of woody biomass
Umeki, K., Yamamoto, K. I., Namioka, T., & Yoshikawa, K. (2009) · Applied Energy · doi:10.1016/j.apenergy.2009.09.035 · Cited by 291
Ma, C., Yu, J., Wang, B., Song, Z., Xiang, J., Hu, S., Su, S., & Sun, L. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.020 · Cited by 287
Applications of zeolites in petroleum refining
Degnan, T. F. (2000) · Topics in Catalysis · doi:10.1023/a:1009054905137 · Cited by 284
Dechlorination of fuels in pyrolysis of PVC containing plastic wastes
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2011) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.05.008 · Cited by 282
HE, M., XIAO, B., HU, Z., LIU, S., GUO, X., & LUO, S. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.12.023 · Cited by 277
Adrados, A., de Marco, I., Caballero, B. M., López, A., Laresgoiti, M. F., & Torres, A. (2012) · Waste Management · doi:10.1016/j.wasman.2011.06.016 · Cited by 275
Arabiourrutia, M., Elordi, G., Lopez, G., Borsella, E., Bilbao, J., & Olazar, M. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.012 · Cited by 275
Review of gasification fundamentals and new findings: Reactors, feedstock, and kinetic studies
Mahinpey, N., & Gomez, A. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.03.037 · Cited by 275
Wu, C., & Williams, P. T. (2010) · Fuel · doi:10.1016/j.fuel.2010.05.032 · Cited by 271
Corella, J., Toledo, J. M., & Padilla, R. (2004) · Energy & Fuels · doi:10.1021/ef0340918 · Cited by 271
Butler, E., Devlin, G., & McDonnell, K. (2011) · Waste and Biomass Valorization · doi:10.1007/s12649-011-9067-5 · Cited by 270
Elordi, G., Olazar, M., López, G., Amutio, M., Artetxe, M., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.015 · Cited by 264
Microwave-Induced Pyrolysis of Plastic Wastes
Ludlow-Palafox, C., & Chase, H. A. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010202j · Cited by 261
Feedstock recycling of polyethylene in a two-step thermo-catalytic reaction system
Aguado, J., Serrano, D. P., San Miguel, G., Castro, M. C., & Madrid, S. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.11.008 · Cited by 258
Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity
Artetxe, M., Lopez, G., Amutio, M., Elordi, G., Bilbao, J., & Olazar, M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4014869 · Cited by 250
Liu, Y., Qian, J., & Wang, J. (2000) · Fuel Processing Technology · doi:10.1016/s0378-3820(99)00066-1 · Cited by 246
Air gasification of polypropylene plastic waste in fluidized bed gasifier
Xiao, R., Jin, B., Zhou, H., Zhong, Z., & Zhang, M. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2006.09.004 · Cited by 241
Evaluation of pyrolysis process parameters on polypropylene degradation products
Abbas-Abadi, M. S., Haghighi, M. N., Yeganeh, H., & McDonald, A. G. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.05.023 · Cited by 235
Seo, Y.-H., Lee, K.-H., & Shin, D.-H. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00186-9 · Cited by 233
Biomass integrated gasification–SOFC systems: Technology overview
Ud Din, Z., & Zainal, Z. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.013 · Cited by 230
Styrene recovery from polystyrene by flash pyrolysis in a conical spouted bed reactor
Artetxe, M., Lopez, G., Amutio, M., Barbarias, I., Arregi, A., Aguado, R., Bilbao, J., & Olazar, M. (2015) · Waste Management · doi:10.1016/j.wasman.2015.05.034 · Cited by 224
Continuous pyrolysis of waste tyres in a conical spouted bed reactor
López, G., Olazar, M., Aguado, R., & Bilbao, J. (2010) · Fuel · doi:10.1016/j.fuel.2010.03.029 · Cited by 223
Automotive fuels from biomass via gasification
Zhang, W. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.07.010 · Cited by 222
Vacuum pyrolysis of PVC I. Kinetic study
Miranda, R., Yang, J., Roy, C., & Vasile, C. (1999) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(98)00186-4 · Cited by 222
Pyrolysis of mixed plastics into aromatics
Kaminsky, W., & Kim, J.-S. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00012-1 · Cited by 219
Fluidized bed gasification of waste-derived fuels
Arena, U., Zaccariello, L., & Mastellone, M. L. (2010) · Waste Management · doi:10.1016/j.wasman.2010.01.038 · Cited by 217
Barbarias, I., Lopez, G., Artetxe, M., Arregi, A., Bilbao, J., & Olazar, M. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.048 · Cited by 215
Waste Refinery: The Valorization of Waste Plastics and End-of-Life Tires in Refinery Units. A Review
Palos, R., Gutiérrez, A., Vela, F. J., Olazar, M., Arandes, J. M., & Bilbao, J. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03918 · Cited by 211
Syngas from steam gasification of polyethylene in a conical spouted bed reactor
Erkiaga, A., Lopez, G., Amutio, M., Bilbao, J., & Olazar, M. (2013) · Fuel · doi:10.1016/j.fuel.2013.03.022 · Cited by 209
Renewable hydrogen production from bio-oil derivative via catalytic steam reforming: An overview
Nabgan, W., Tuan Abdullah, T. A., Mat, R., Nabgan, B., Gambo, Y., Ibrahim, M., Ahmad, A., Jalil, A. A., Triwahyono, S., & Saeh, I. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.069 · Cited by 207
Thermogravimetry as a tool to classify waste components to be used for energy generation
Heikkinen, J. M., Hordijk, J. C., de Jong, W., & Spliethoff, H. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2003.12.001 · Cited by 204
Sewage sludge valorization by flash pyrolysis in a conical spouted bed reactor
Alvarez, J., Amutio, M., Lopez, G., Barbarias, I., Bilbao, J., & Olazar, M. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.03.047 · Cited by 204
Pyrolysis of polyolefins for increasing the yield of monomers’ recovery
Donaj, P. J., Kaminsky, W., Buzeto, F., & Yang, W. (2012) · Waste Management · doi:10.1016/j.wasman.2011.10.009 · Cited by 202
Luo, S., Xiao, B., Hu, Z., Liu, S., Guo, X., & He, M. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.12.075 · Cited by 198
Thermal and catalytic degradation of structurally different types of polyethylene into fuel oil
Uddin, M. A., Koizumi, K., Murata, K., & Sakata, Y. (1997) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(96)00191-7 · Cited by 196
Acomb, J. C., Wu, C., & Williams, P. T. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.09.018 · Cited by 196
Effect of pressure on thermal degradation of polyethylene
Murata, K., Sato, K., & Sakata, Y. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2003.08.010 · Cited by 195
Kinetics of woodchips char gasification with steam and carbon dioxide
Ahmed, I., & Gupta, A. K. (2010) · Applied Energy · doi:10.1016/j.apenergy.2010.11.007 · Cited by 187
López, G., Erkiaga, A., Amutio, M., Bilbao, J., & Olazar, M. (2015) · Fuel · doi:10.1016/j.fuel.2015.03.006 · Cited by 185
Hydrogen production from biomass by continuous fast pyrolysis and in-line steam reforming
Arregi, A., Lopez, G., Amutio, M., Barbarias, I., Bilbao, J., & Olazar, M. (2016) · RSC Advances · doi:10.1039/c6ra01657j · Cited by 185
Erkiaga, A., Lopez, G., Amutio, M., Bilbao, J., & Olazar, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.10.018 · Cited by 182
Efficient disposal of waste polyolefins through microwave assisted pyrolysis
Undri, A., Rosi, L., Frediani, M., & Frediani, P. (2014) · Fuel · doi:10.1016/j.fuel.2013.08.037 · Cited by 182
Catalysts for Steam Reforming of Bio-oil: A Review
Chen, J., Sun, J., & Wang, Y. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b00600 · Cited by 182
Co-gasification of coal, plastic waste and wood in a bubbling fluidized bed reactor
Mastellone, M. L., Zaccariello, L., & Arena, U. (2010) · Fuel · doi:10.1016/j.fuel.2010.05.019 · Cited by 181
Fernandez-Akarregi, A. R., Makibar, J., Lopez, G., Amutio, M., & Olazar, M. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2013.02.022 · Cited by 180
Ponzio, A., Kalisz, S., & Blasiak, W. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.08.002 · Cited by 180
Lee, K.-H., Noh, N.-S., Shin, D.-H., & Seo, Y. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00227-6 · Cited by 178
Mastral, F. J., Esperanza, E., Berrueco, C., Juste, M., & Ceamanos, J. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00068-2 · Cited by 175
Fluidised bed pyrolysis of polypropylene over cracking catalysts for producing hydrocarbons
Lin, Y., & Yen, H.-Y. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.01.006 · Cited by 175
Tertiary recycling of polypropylene by catalytic cracking in a semibatch stirred reactor
Cardona, S., & Corma, A. (2000) · Applied Catalysis B: Environmental · doi:10.1016/s0926-3373(99)00127-7 · Cited by 172
Production of Hydrogen from Plastics by Pyrolysis and Catalytic Steam Reform
Czernik, S., & French, R. J. (2006) · Energy & Fuels · doi:10.1021/ef050354h · Cited by 171
Arregi, A., Amutio, M., Lopez, G., Artetxe, M., Alvarez, J., Bilbao, J., & Olazar, M. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.008 · Cited by 171
Barbarias, I., Lopez, G., Alvarez, J., Artetxe, M., Arregi, A., Bilbao, J., & Olazar, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.091 · Cited by 170
Hernández, M. D. R., Gómez‐Siurana, A., García, A. N. J., Agulló, J., & Marcilla, A. F. (2006) · Applied Catalysis A General · doi:10.1016/j.apcata.2006.10.017 · Cited by 169
Marcilly, C. R. (2000) · Topics in Catalysis · doi:10.1023/a:1009007021975 · Cited by 168
Namioka, T., Saito, A., Inoue, Y., yeongsu, P., Min, T., Roh, S. A., & Yoshikawa, K. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.12.053 · Cited by 166
Sharratt, P. N., Lin, Y.-H., Garforth, A. A., & Dwyer, J. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970348b · Cited by 166
Achilias, D. S., Kanellopoulou, I., Megalokonomos, P., Antonakou, E., & Lappas, A. A. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200700058 · Cited by 164
de Andrés, J. M., Narros, A., & Rodríguez, M. E. (2011) · Fuel · doi:10.1016/j.fuel.2010.09.043 · Cited by 163
Microwave Heating Applied to Pyrolysis
Fernandez, Y., Arenillas, A., & Angel, J. (2011) · Advances in Induction and Microwave Heating of Mineral and Organic Materials · doi:10.5772/13548 · Cited by 163
Production of high quality syngas from argon/water plasma gasification of biomass and waste
Hlína, M., Hrabovský, M., Kavka, T., & Konràd, M. (2013) · Waste Management · doi:10.1016/j.wasman.2013.09.018 · Cited by 162
Thermal and thermo-catalytic degradation of high-density polyethylene waste
Miskolczi, N., Bartha, L., Deák, G., Jóver, B., & Kalló, D. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.07.002 · Cited by 161
Garforth, A. A., Lin, Y., Sharratt, P., & Dwyer, J. (1998) · Applied Catalysis A General · doi:10.1016/s0926-860x(98)00022-2 · Cited by 161
Wang, J., Cheng, G., You, Y., Xiao, B., Liu, S., He, P., Guo, D., Guo, X., & Zhang, G. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.01.070 · Cited by 160
Catalytic degradation of high density polyethylene over nanocrystalline HZSM-5 zeolite
Mastral, J. F., Berrueco, C., Gea, M., & Ceamanos, J. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.06.009 · Cited by 160
Artetxe, M., López, G., Elordi, G., Amutio, M., Bilbao, J., & Olazar, M. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300178e · Cited by 154
Kinetic studies of co-pyrolysis of rubber seed shell with high density polyethylene
Chin, B. L. F., Yusup, S. B., Shoaibi, A. A., Kannan, P., Srinivasakannan, C., & Sulaıman, S. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.043 · Cited by 153
Tar removal during the fluidized bed gasification of plastic waste
Arena, U., Zaccariello, L., & Mastellone, M. L. (2008) · Waste Management · doi:10.1016/j.wasman.2008.05.010 · Cited by 151
Luo, G., Suto, T., Yasu, S., & Katō, K. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00095-1 · Cited by 150
Hwang, I.-H., Kobayashi, J., & Kawamoto, K. (2013) · Waste Management · doi:10.1016/j.wasman.2013.10.009 · Cited by 145
Esfahani, R. A. M., Yusup, S. B., Uemura, Y., Chin, B. L. F., Lam, H. L., & Shoaibi, A. A. (2014) · Energy · doi:10.1016/j.energy.2014.04.062 · Cited by 145
Pyrolysis characteristics of polystyrene and polypropylene in a stirred batch reactor
Kim, S.-S., & Kim, S. (2003) · Chemical Engineering Journal · doi:10.1016/s1385-8947(03)00184-0 · Cited by 142
Biomass Energy Data Book: Edition 4
USDOE Office of Energy Efficiency and Renewable Energy (EERE), O. O. S. T. B. T. O. (., Boundy, R. G., Diegel, S. W., Wright, L. L., & Davis, S. C. (2011) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1050890 · Cited by 140
López, G., Olazar, M., Amutio, M., Aguado, R., & Bilbao, J. (2009) · Energy & Fuels · doi:10.1021/ef900582k · Cited by 139
Arena, U., & Gregorio, F. D. (2014) · Energy · doi:10.1016/j.energy.2014.01.084 · Cited by 138
Influence of FCC catalyst steaming on HDPE pyrolysis product distribution
Olazar, M., López, G., Amutio, M., Elordi, G., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.016 · Cited by 137
Recycling of waste plastics by ultrapyrolysis using an internally circulating fluidized bed reactor
Milne, B. J., Behie, L. A., & Berruti, F. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00014-5 · Cited by 137
H2-rich syngas production by fluidized bed gasification of biomass and plastic fuel
Ruoppolo, G., Ammendola, P., Chirone, R., & Miccio, F. (2012) · Waste Management · doi:10.1016/j.wasman.2011.12.004 · Cited by 137
Wu, C., & Williams, P. T. (2010) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2010.02.022 · Cited by 137
Effect of gasification agent on co-gasification of rice production wastes mixtures
Pinto, F., André, R. N., Miranda, M., Neves, D., Varela, F., & Santos, J. (2016) · Fuel · doi:10.1016/j.fuel.2016.04.048 · Cited by 137
Erkiaga, A., López, G., Amutio, M., Bilbao, J., & Olazar, M. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2013.07.008 · Cited by 132
Catalytic pyrolysis of LDPE leads to valuable resource recovery and reduction of waste problems
Shah, J., Jan, M. R., Mabood, F., & Jabeen, F. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.06.016 · Cited by 131
Thermal and catalytic decomposition of mixed plastics
Vasile, C., Pakdel, H., Brebu, M. A., Onu, P., Darie, H., & Ciocâlteu, S. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00151-0 · Cited by 131
Makibar, J., Fernandez-Akarregi, A. R., Álava, I., Cueva, F., López, G., & Olazar, M. (2011) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2011.05.013 · Cited by 130
Lee, K.-H., & Shin, D.-H. (2006) · Waste Management · doi:10.1016/j.wasman.2005.12.017 · Cited by 130
Brachi, P., Chirone, R., Miccio, F., Miccio, M., Picarelli, A., & Ruoppolo, G. (2014) · Fuel · doi:10.1016/j.fuel.2014.02.070 · Cited by 128
Kim, J., Mun, T., Kim, J., & Kim, J.-S. (2011) · Fuel · doi:10.1016/j.fuel.2011.02.021 · Cited by 128
Abbas‐Abadi, M. S., Nekoomanesh, M., & Yeganeh, H. (2012) · Fuel Processing Technology · doi:10.1016/j.fuproc.2012.09.042 · Cited by 126
Park, S., Seo, D. K., Lee, S. H., Yu, T.-U., & Hwang, J. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.06.009 · Cited by 126
Catalytic cracking of HDPE over hybrid zeolitic–mesoporous materials
García, R. A., Serrano, D. P., & Otero, D. (2005) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.11.002 · Cited by 123
Wu, C., & Williams, P. T. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2009.03.004 · Cited by 123
Lin, Y., Yang, M.-H., Yeh, T.-F., & Ger, M. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.02.015 · Cited by 123
Kinetic Study of Polyolefin Pyrolysis in a Conical Spouted Bed Reactor
Aguado, R., Olazar, M., Gaisán, B., Prieto, R., & Bilbao, J. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0201260 · Cited by 121
High-Temperature Steam Gasification of Municipal Solid Waste, Rubber, Plastic and Wood
Lee, U., Chung, J. N., & Ingley, H. A. (2014) · Energy & Fuels · doi:10.1021/ef500713j · Cited by 121
Continuous Polyolefin Cracking on an HZSM-5 Zeolite Catalyst in a Conical Spouted Bed Reactor
Elordi, G., Olazar, M., López, G., Artetxe, M., & Bilbao, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2002999 · Cited by 121
Liu, X., Zhang, Y. S., Nahil, M. A., Williams, P. T., & Wu, C. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.05.001 · Cited by 121
Hydrogen production from polystyrene pyrolysis and gasification: Characteristics and kinetics
Ahmed, I., & Gupta, A. K. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.05.046 · Cited by 120
Xiao, X., Cao, J., Meng, X., Le, D. D., Li, L., Ogawa, Y., Sato, K., & Takarada, T. (2011) · Fuel · doi:10.1016/j.fuel.2011.06.077 · Cited by 120
Catalytic degradation of polyethylene into fuel oil over mesoporous silica (KFS-16) catalyst
Sakata, Y., Uddin, M. A., Muto, A., Kanada, Y., Koizumi, K., & Murata, K. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(97)00052-1 · Cited by 120
Narobe, M., Golob, J., Klinar, D., Francetič, V., & Likozar, B. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.03.121 · Cited by 116
HDPE pyrolysis-steam reforming in a tandem spouted bed-fixed bed reactor for H2 production
Erkiaga, A., López, G., Barbarias, I., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.10.010 · Cited by 115
Thermal degradation of mixed plastic waste to aromatics and gas
Kaminsky, W., Schlesselmann, B., & Simon, C. M. (1996) · Polymer Degradation and Stability · doi:10.1016/0141-3910(96)00087-0 · Cited by 114
Wilk, V., & Hofbauer, H. (2013) · Energy & Fuels · doi:10.1021/ef400349k · Cited by 114
Jan, M. R., Shah, J., & Gulab, H. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.05.017 · Cited by 112
Yang, R., Chuang, K., & Wey, M. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b01866 · Cited by 111
Transformation of Several Plastic Wastes into Fuels by Catalytic Cracking
Arandes, J. M., Abajo, I., López-Valerio, D., Fernández, I., Azkoiti, M. J., Olazar, M., & Bilbao, J. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970096e · Cited by 110
Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed
Elordi, G., Olazar, M., Castaño, P., Artetxe, M., & Bilbao, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3018274 · Cited by 110
Esfahani, R. A. M., Osmieri, L., Specchia, S., Yusup, S. B., Tavasoli, A., & Zamaniyan, A. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.049 · Cited by 110
Abnisa, F., Daud, W. M. A. W., & Sahu, J. N. (2013) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.11850 · Cited by 109
Olivine as a tar removal catalyst during fluidized bed gasification of plastic waste
Mastellone, M. L., & Arena, U. (2008) · AIChE Journal · doi:10.1002/aic.11497 · Cited by 108
Antelava, A., Jablonska, N., Constantinou, A., Manos, G., Salaudeen, S. A., Dutta, A., & Al-Salem, S. M. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c04017 · Cited by 107
China's roadmap to plastic waste management and associated economic costs
Sun, Y., Liu, S., Wang, P., Jian, X., Liao, X., & Chen, W. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2022.114686 · Cited by 105
Study of the catalytic pyrolysis behaviour of polyethylene–polypropylene mixtures
Marcilla, A. F., Garcia-Quesada, J. C., Sánchez, S., & Ruiz‐Femenia, R. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.10.005 · Cited by 104
Pyrolysis-Catalytic-Dry Reforming of Waste Plastics and Mixed Waste Plastics for Syngas Production
Saad, J. M., & Williams, P. T. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b02508 · Cited by 102
Converting Biomass and Waste Plastic to Solid Fuel Briquettes
Zannikos, F., Kalligeros, S. S., Anastopoulos, G., & Lois, E. (2012) · Journal of Renewable Energy · doi:10.1155/2013/360368 · Cited by 101
Catalytic pyrolysis of high density polyethylene in a conical spouted bed reactor
Elordi, G., Olazar, M., Aguado, R., López, G., Arabiourrutia, M., & Bilbao, J. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.11.010 · Cited by 100
Hydrogen Production by High Density Polyethylene Steam Gasification and In-Line Volatile Reforming
López, G., Erkiaga, A., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02413 · Cited by 100
Thermo-catalytic pyrolysis of polystyrene in the presence of zinc bulk catalysts
Adnan, A., Shah, J., & Jan, M. R. (2014) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2014.05.011 · Cited by 97
Autothermal and allothermal pyrolysis in a continuous fixed bed reactor
Milhé, M., STEENE, L. V. D., Haube, M., Commandré, J.-M., Fassinou, W. F., & Flamant, G. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.03.011 · Cited by 97
Performance of a conical spouted bed pilot plant for bio-oil production by poplar flash pyrolysis
Makibar, J., Fernandez-Akarregi, A. R., Amutio, M., López, G., & Olazar, M. (2015) · Fuel Processing Technology · doi:10.1016/j.fuproc.2015.03.011 · Cited by 96
Pyrolysis and in-line catalytic steam reforming of polystyrene through a two-step reaction system
Barbarias, I., López, G., Artetxe, M., Arregi, A., Santamaria, L., Bilbao, J., & Olazar, M. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.10.006 · Cited by 96
A Review on Plasma Gasification of Solid Residues: Recent Advances and Developments
Oliveira, M., Ramos, A., Ismail, T. M., Monteiro, E., & Rouboa, A. I. (2022) · Energies · doi:10.3390/en15041475 · Cited by 96
yeongsu, P., Namioka, T., Sakamoto, S., Min, T., Roh, S. A., & Yoshikawa, K. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.10.014 · Cited by 95
Rodríguez, E., Gutiérrez, A., Palos, R., Vela, F. J., Arandes, J. M., & Bilbao, J. (2019) · Waste Management · doi:10.1016/j.wasman.2019.05.005 · Cited by 95
A techno-economic comparison of fluidized bed gasification of two mixed plastic wastes
Arena, U., Gregorio, F. D., Amorese, C., & Mastellone, M. L. (2011) · Waste Management · doi:10.1016/j.wasman.2011.02.004 · Cited by 93
Management of plastic waste: A bibliometric mapping and analysis
de Sousa, F. D. B. (2021) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x21992422 · Cited by 93
Recent Advances on Waste Plastic Thermal Pyrolysis: A Critical Overview
Yansaneh, O. Y., & Zein, S. H. S. (2022) · Processes · doi:10.3390/pr10020332 · Cited by 93
Pyrolysis of common plastics and their mixtures to produce valuable petroleum-like products
Jaafar, Y., Abdelouahed, L., Hage, R. E., Samrani, A. G. E., & Taouk, B. (2021) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2021.109770 · Cited by 92
Fluidized-Bed Gasification of Plastic Waste, Wood, and Their Blends with Coal
Zaccariello, L., & Mastellone, M. L. (2015) · Energies · doi:10.3390/en8088052 · Cited by 89
Gasification of coal and PET in fluidized bed reactor
Pohořelý, M., Vosecký, M., HEJDOVA, P., Punčochář, M., Skoblia, S., Staf, M., Vošta, J., Koutský, B., & Svoboda, K. (2006) · Fuel · doi:10.1016/j.fuel.2006.04.022 · Cited by 89
Novel three-phase steam–air plasma torch for gasification of high-caloric waste
Rutberg, P. G., Кузнецов, В. А., Serba, E. O., Popov, S. D., Суров, А. В., Nakonechny, G. V., & Nikonov, A. V. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.03.052 · Cited by 87
Lin, Y., & Yang, M.-H. (2007) · Applied Catalysis A General · doi:10.1016/j.apcata.2007.05.039 · Cited by 87
Dou, B., Wang, K., Jiang, B. Q., Song, Y., Zhang, C., Chen, H., & Xu, Y. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.12.197 · Cited by 87
Cho, M.-H., Mun, T., & Kim, J.-S. (2013) · Energy · doi:10.1016/j.energy.2013.02.041 · Cited by 86
Evolution of products during the degradation of polyethylene in a batch reactor
Marcilla, A. F., Beltrán, M., & Navarro, R. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.03.004 · Cited by 85
Obeid, F., Zeaiter, J., Al-Muhtaseb, A. H., & Bouhadir, K. H. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.05.075 · Cited by 84
Comparison of the air-blown bubbling fluidized bed gasification of wood and wood–PET pellets
Robinson, T., Bronson, B., Gogolek, P. E. G., & Mehrani, P. (2016) · Fuel · doi:10.1016/j.fuel.2016.03.038 · Cited by 84
Pinto, F., André, R. N., Franco, C., Lopes, H., Gulyurtlu, I., & Cabrita, I. (2009) · Fuel · doi:10.1016/j.fuel.2008.12.012 · Cited by 83
Removal of tar by secondary air in fluidised bed gasification of residual biomass and coal
Pan, Y. G., Roca, X., García, E. V., & Puigjaner, L. (1999) · Fuel · doi:10.1016/s0016-2361(99)00118-0 · Cited by 80
Stability of ZSM-11 and BETA zeolites during the catalytic cracking of low-density polyethylene
Renzini, M. S., Lerici, L., Sedran, U. A., & Pierella, L. B. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.08.008 · Cited by 80
Catalytic efficiency of some novel nanostructured heterogeneous solid catalysts in pyrolysis of HDPE
Ahmad, I. K., Khan, M. I., Ishaq, M., Khan, H., Gul, K., & Ahmad, W. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.09.009 · Cited by 80
Cho, M.-H., Mun, T., & Kim, J.-S. (2013) · Energy · doi:10.1016/j.energy.2013.06.021 · Cited by 79
Wu, C., & Williams, P. T. (2009) · Fuel · doi:10.1016/j.fuel.2009.10.020 · Cited by 79
Fluid Catalytic Cracking: Science and Technology
(1993) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(08)x6071-9 · Cited by 78
Saad, J. M., Nahil, M. A., & Williams, P. T. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.09.027 · Cited by 77
Li, J., Liao, S., Dan, W., Jia, K., & Zhou, X. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.08.026 · Cited by 76
Thermal and catalytic decomposition of polyethylene and polypropylene
Onu, P., Vasile, C., Ciocı̂lteu, S., et al. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(98)00109-0 · Cited by 76
López, G., Álvarez, J., Amutio, M., Arregi, A., Bilbao, J., & Olazar, M. (2016) · Energy · doi:10.1016/j.energy.2016.04.040 · Cited by 76
Deactivation Behaviors of Zeolite and Silica−Alumina Catalysts in the Degradation of Polyethylene
Uemichi, Y., Hattori, M., Itoh, T., Nakamura, J., & Sugioka, M. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970605c · Cited by 74
Wu, C., & Williams, P. T. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.05.121 · Cited by 73
Research works printed but not linked: 32
- Aguado, 2005, Defluidization modelling of pyrolysis of plastics in a conical spouted bed reactor, Chem. Eng. Process. Process Intensif., 44, 231, 10.1016/j.cep.2004.02.016 · doi:10.1016/j.cep.2004.02.016
- Arabiourrutia, 2012, Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor, J. Anal. Appl. Pyrol, 94, 230, 10.1016/j.jaap.2011.12.012 · DOI · Paper page
- Artetxe, 2013, Cracking of high density polyethylene pyrolysis waxes on HZSM-5 catalysts of different acidity, Ind. Eng. Chem. Res., 52, 10637, 10.1021/ie4014869 · DOI · Paper page
- 2015, Polyvinyl chloride (PVC)
- Cepeliogullar, 2013, Utilization of two different types of plastic wastes from daily and industrial life, 1
- Fakhrhoseini, 2013, Predicting pyrolysis products of PE, 1
- Gibadullina, 2015, The creation of high temperature steam flow for plasma chemical gasification of polymer waste, Int. J. Appl. Eng. Res., 10, 45015
- He, 2009, Syngas production from catalytic gasification of waste polyethylene: Influence of temperature on gas yield and com-position, Int. J. Hydrog. Energy, 34, 1342, 10.1016/j.ijhydene.2008.12.023 · DOI · Paper page
- Hernández, 2007, Effect of the temperature in the nature and extension of the primary and secondary reactions in the thermal and HZSM-5 catalytic pyrolysis of HDPE, Appl. Catal. A Gen., 317, 183, 10.1016/j.apcata.2006.10.017 · DOI
- 2005, International zeolite association
- Iqbal, 2022, Long-term potentiodynamic testing and tribometric properties of amorphous alloy coatings under saline environment, Molecules, 27, 1421, 10.3390/molecules27041421 · doi:10.3390/molecules27041421
- Iqbal, 2020, Comparative analysis on the structure and properties of iron-based amorphous coating sprayed with the thermal spraying techniques, Coatings, 10, 1006, 10.3390/coatings10101006 · doi:10.3390/coatings10101006
- Kreith, 1998, The CRC handbook of mechanical engineering, 10.1201/NOE0849397516 · doi:10.1201/noe0849397516
- Marcilla, 2009, Thermal and catalytic pyrolysis of polyethylene over HZSM5 and HUSY zeolites in a batch reactor under dynamic conditions, Appl. Catal. B Environ., 86, 78, 10.1016/j.apcatb.2008.07.026 · DOI · Paper page
- Martínez-Lera, 2013, Thermal valorization of post-consumer film wastein a bubbling bed gasifier, Waste Manag., 33, 1640, 10.1016/j.wasman.2013.03.016 · DOI
- Mastellone, 2010, Co-gasification of coal, plastic waste and wood in a bubbling fluidized bed reactor, Fuel, 89, 2991, 10.1016/j.fuel.2010.05.019 · DOI · Paper page
- Mastral, 2006, Catalytic degradation of high density polyethylene over nanocrystalline HZSM-5 zeolite, Polym. Degr., 91, 3330, 10.1016/j.polymdegradstab.2006.06.009 · DOI · Paper page
- Michael, 2010, Plastic waste total in MSW
- Othman, 2008, Determination of physical and chemical characteristics of electronic plastic waste (Ep-Waste) resin using proximate and ultimate analysis method, 169
- Palos, 2022, Cracking of plastic pyrolysis oil over FCC equilibrium catalysts to produce fuels: Kinetic modeling, Fuel, 316, 123341, 10.1016/j.fuel.2022.123341 · DOI
- Pinto, 2009, Co-Gasification of coal and wastes in a pilot-scale installation 1: e ff ect of catalysts in syngas treatment to achieve tar abatement, Fuel, 88, 2392, 10.1016/j.fuel.2008.12.012 · DOI
- 2016, Plastics – the Facts 2016. An analysis of European plastics production
- Rutberg, 2013, Novel three-phase steam-air plasma torch for gasification of high-caloric waste, Appl. Energy, 108, 505, 10.1016/j.apenergy.2013.03.052 · DOI
- Saad, 2015, Influence of process conditions on syngas production from the thermal processing of waste high density polyethylene, J. Anal. Appl. Pyrolysis, 113, 35, 10.1016/j.jaap.2014.09.027 · DOI
- Shioya, 2005, Development of waste plastics liquefaction technology, feedstock recycling in Japan, 19
- Singh, 2022, Simulation of biomass-plastic co-gasification in a fluidized bed reactor using Aspen plus, 123708
- Straka, 2014, Hydrogen-rich gas as a product of two-stage co-gasification of lignite/waste plastics mixtures, Int. J. Hydrog. Energy, 39, 10987, 10.1016/j.ijhydene.2014.05.054 · DOI
- 2013, Chemical reactors. The essential chemical industry [online]
- Thimoteo, 2022, Açaí waste valorization via mannose and polyphenols production: Techno - economic and environmental assessmentBiomass Convers. Biorefinery, 0123456789, 10.1007/s13399-022-02681-0 · doi:10.1007/s13399-022-02681-0
- Wan Ho, 2015, Waste plastics into fuel oil?
- Wu, 2009, Hydrogen production from the pyrolysis/gasification of polypropylene: In fluence of steam flow rate, carrier gas flow rate and gasification temperature, Energy fuels, 23, 5055, 10.1021/ef900278w · DOI
- Zhang, 2016, Catalytic co-pyrolysis of lignocellulosic biomass with polymers: A critical review, Green Chem., 18, 4145, 10.1039/c6gc00911e · DOI · Paper page
Cited by
Sustainable Solutions Through Innovative Plastic Waste Recycling Technologies
Alaghemandi, M. (2024) · Sustainability · doi:10.3390/su162310401 · Cited by 163
Waste-derived carbon nanostructures (WD-CNs): An innovative step toward waste to treasury
Omar, R. A., Talreja, N., Chuhan, D., & Ashfaq, M. (2024) · Environmental Research · doi:10.1016/j.envres.2023.118096 · Cited by 25
Metadata
- Authors
- Shah, H. H., Amin, M., Iqbal, A., Nadeem, I., Kalin, M., Soomar, A. M., & Galal, A. M.
- Venue
- Frontiers in Chemistry
- Publisher
- Frontiers Media SA
- Published
- 2023-02-03
- Volume
- 10
- Pages
- 960894-960894
- ISSN
- 2296-2646 (ISSN-L)
- OpenAlex
- W4319080751
- Cited by
- 269
- References
- 263
- FWCI
- 19.73
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.