The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Emerging Applications of Bedside 3D Printing in Plastic Surgery
Open accessAbstract
Modern imaging techniques are an essential component of preoperative planning in plastic and reconstructive surgery. However, conventional modalities, including three-dimensional (3D) reconstructions, are limited by their representation on 2D workstations. 3D printing, also known as rapid prototyping or additive manufacturing, was once the province of industry to fabricate models from a computer-aided design (CAD) in a layer-by-layer manner. The early adopters in clinical practice have embraced the medical imaging-guided 3D-printed biomodels for their ability to provide tactile feedback and a superior appreciation of visuospatial relationship between anatomical structures. With increasing accessibility, investigators are able to convert standard imaging data into a CAD file using various 3D reconstruction softwares and ultimately fabricate 3D models using 3D printing techniques, such as stereolithography, multijet modeling, selective laser sintering, binder jet technique, and fused deposition modeling. However, many clinicians have questioned whether the cost-to-benefit ratio justifies its ongoing use. The cost and size of 3D printers have rapidly decreased over the past decade in parallel with the expiration of key 3D printing patents. Significant improvements in clinical imaging and user-friendly 3D software have permitted computer-aided 3D modeling of anatomical structures and implants without outsourcing in many cases. These developments offer immense potential for the application of 3D printing at the bedside for a variety of clinical applications. In this review, existing uses of 3D printing in plastic surgery practice spanning the spectrum from templates for facial transplantation surgery through to the formation of bespoke craniofacial implants to optimize post-operative esthetics are described. Furthermore, we discuss the potential of 3D printing to become an essential office-based tool in plastic surgery to assist in preoperative planning, developing intraoperative guidance tools, teaching patients and surgical trainees, and producing patient-specific prosthetics in everyday surgical practice.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yaşlı Kadınlarda Üreme Sağlığı
Kokanalı, D., & Engin Üstün, Y. (n.d.) · DergiPark (Istanbul University) · Cited by 170,090
3D Slicer as an image computing platform for the Quantitative Imaging Network
Fedorov, A., Beichel, R., Kalpathy-Cramer, J., Finet, J., Fillion-Robin, J.-C., Pujol, S., Bauer, C., Jennings, D., Fennessy, F., Sonka, M., et al. (2012) · Magnetic Resonance Imaging · doi:10.1016/j.mri.2012.05.001 · Cited by 9,023
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
OsiriX: An Open-Source Software for Navigating in Multidimensional DICOM Images
Rosset, A., Spadola, L., & Ratib, O. (2004) · Journal of Digital Imaging · doi:10.1007/s10278-004-1014-6 · Cited by 1,767
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Levy, G. N., Schindel, R., & Kruth, J. P. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60206-6 · Cited by 1,121
Medical Applications for 3D Printing: Current and Projected Uses.
Ventola, C. L. (2014) · PubMed Central · Cited by 920
Innovations in 3D printing: a 3D overview from optics to organs
Schubert, C., van Langeveld, M. C., & Donoso, L. A. (2014) · British Journal of Ophthalmology · doi:10.1136/bjophthalmol-2013-304446 · Cited by 753
The production of anatomical teaching resources using three‐dimensional (3D) printing technology
McMenamin, P. G., Quayle, M. R., McHenry, C. R., & Adams, J. W. (2014) · Anatomical Sciences Education · doi:10.1002/ase.1475 · Cited by 698
Self-citationBioresorbable Airway Splint Created with a Three-Dimensional Printer
Zopf, D. A., Hollister, S. J., Nelson, M. E., Ohye, R. G., & Green, G. E. (2013) · New England Journal of Medicine · doi:10.1056/nejmc1206319 · Cited by 589
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Goyanes, A., Buanz, A. B. M., Hatton, G. B., Gaisford, S., & Basit, A. W. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2014.12.003 · Cited by 570
Skowyra, J., Pietrzak, K., & Alhnan, M. A. (2015) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2014.11.009 · Cited by 530
Gering, D. T., Nabavi, A., Kikinis, R., Hata, N., O'Donnell, L. J., Grimson, W. E. L., Jolesz, F. A., Black, P. M., & Wells, W. M. (2001) · Journal of Magnetic Resonance Imaging · doi:10.1002/jmri.1139 · Cited by 366
Three-dimensional print of a liver for preoperative planning in living donor liver transplantation
Zein, N. N., Hanouneh, I. A., Bishop, P. D., Samaan, M., Eghtesad, B., Quintini, C., Miller, C., Yerian, L., & Klatte, R. (2013) · Liver Transplantation · doi:10.1002/lt.23729 · Cited by 326
Reinhardt, J. M., Ding, K., Cao, K., Christensen, G. E., Hoffman, E. A., & Bodas, S. V. (2008) · Medical Image Analysis · doi:10.1016/j.media.2008.03.007 · Cited by 322
Ibrahim, D., Broilo, T. L., Heitz, C., de Oliveira, M. G., de Oliveira, H. W., Nobre, S. M. W., dos Santos Filho, J. H. G., & Silva, D. N. (2009) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2008.10.008 · Cited by 285
Stereolithographic biomodelling in cranio-maxillofacial surgery: a prospective trial
D'Urso, P. S., Barker, T. M., Earwaker, W. J., Bruce, L. J., Atkinson, R. L., Lanigan, M. W., Arvier, J. F., & Effeney, D. J. (1999) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/s1010-5182(99)80007-9 · Cited by 276
Three-dimensional printing surgical instruments: are we there yet?
Rankin, T. M., Giovinco, N. A., Cucher, D. J., Watts, G., Hurwitz, B., & Armstrong, D. G. (2014) · Journal of Surgical Research · doi:10.1016/j.jss.2014.02.020 · Cited by 275
Silva, D. N., Gerhardt de Oliveira, M., Meurer, E., Meurer, M. I., Lopes da Silva, J. V., & Santa-Bárbara, A. (2008) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2008.04.003 · Cited by 246
Costello, J. P., Olivieri, L. J., Su, L., Krieger, A., Alfares, F., Thabit, O., Marshall, M. B., Yoo, S.-J., Kim, P. C., Jonas, R. A., et al. (2015) · Congenital Heart Disease · doi:10.1111/chd.12238 · Cited by 241
Mashiko, T., Otani, K., Kawano, R., Konno, T., Kaneko, N., Ito, Y., & Watanabe, E. (2015) · World Neurosurgery · doi:10.1016/j.wneu.2013.10.032 · Cited by 228
Three-Dimensional Printing Techniques
Demirak, O., Gokyer, S., Ergene, E., & Yilgor, P. (2025) · Biological and Medical Physics, Biomedical Engineering · doi:10.1007/978-3-031-90966-5_3 · Cited by 225
3D Printing and Neurosurgery—Ready for Prime Time?
Klein, G. T., Lu, Y., & Wang, M. Y. (2013) · World Neurosurgery · doi:10.1016/j.wneu.2013.07.009 · Cited by 224
3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects
Klammert, U., Gbureck, U., Vorndran, E., Rödiger, J., Meyer-Marcotty, P., & Kübler, A. C. (2010) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2010.01.009 · Cited by 213
Schmauss, D., Haeberle, S., Hagl, C., & Sodian, R. (2015) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu310 · Cited by 212
Manufacturing splints for orthognathic surgery using a three-dimensional printer
Metzger, M. C., Hohlweg‐Majert, B., Schwarz, U., Teschner, M., Hammer, B., & Schmelzeisen, R. (2008) · Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology · doi:10.1016/j.tripleo.2007.07.040 · Cited by 194
3D Printing: Making Things at the Library
Hoy, M. B. (2013) · Medical Reference Services Quarterly · doi:10.1080/02763869.2013.749139 · Cited by 187
Chen, J., Zhang, Z., Chen, X., Zhang, C., Zhang, G., & Xu, Z. (2014) · The Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2014.04.026 · Cited by 175
A Plastic Surgery Application in Evolution: Three-Dimensional Printing
Gerstle, T. L., Ibrahim, A. M. S., Kim, P. S., Lee, B. T., & Lin, S. J. (2014) · Plastic and Reconstructive Surgery · doi:10.1097/01.prs.0000436844.92623.d3 · Cited by 163
Rapid prototyping compliant arterial phantoms for in-vitro studies and device testing
Biglino, G., Verschueren, P., Zegels, R., Taylor, A. M., & Schievano, S. (2013) · Journal of Cardiovascular Magnetic Resonance · doi:10.1186/1532-429x-15-2 · Cited by 162
Mechanical design of a shape memory alloy actuated prosthetic hand
Laurentis, K. J. D., & Mavroidis, C. (2002) · Technology and Health Care · doi:10.3233/thc-2002-10202 · Cited by 158
Chang, J. W., Park, S. A., Park, J., Choi, J. W., Kim, Y., Shin, Y. S., & Kim, C. (2014) · Artificial Organs · doi:10.1111/aor.12310 · Cited by 154
Medical rapid prototyping applications and methods
Hieu, L. C., Zlatov, N., Sloten, J. V., Bohez, E. L. J., Khanh, L., Binh, P. H., Oris, P., & Toshev, Y. (2005) · Assembly Automation · doi:10.1108/01445150510626415 · Cited by 152
Saijo, H., Igawa, K., Kanno, Y., Mori, Y., Kondo, K., Shimizu, K., Suzuki, S., Chikazu, D., Iino, M., Anzai, M., et al. (2009) · Journal of Artificial Organs · doi:10.1007/s10047-009-0462-7 · Cited by 147
Rapid development of auricular prosthesis using CAD and rapid prototyping technologies
Subburaj, K., Nair, K. C., Rajesh, S., Meshram, S., & Ravi, B. (2007) · International Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.ijom.2007.07.013 · Cited by 144
Flügge, T. V., Nelson, K., Schmelzeisen, R., & Metzger, M. C. (2013) · Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.joms.2013.04.010 · Cited by 143
Schmauß, D., Schmitz, C., Bigdeli, A. K., Weber, S., Gerber, N., Beiras-Fernández, A., Schwarz, F., Becker, C. R., Kupatt, C., & Sodian, R. (2012) · The Annals of Thoracic Surgery · doi:10.1016/j.athoracsur.2011.09.031 · Cited by 136
Tam, M. D. B. S., Laycock, S. D., Brown, J. R., & Jakeways, M. (2013) · Journal of Endovascular Therapy · doi:10.1583/13-4450mr.1 · Cited by 130
Physical Models Aiding in Complex Congenital Heart Surgery
Mottl-Link, S., Hübler, M., Kühne, T., Rietdorf, U., Krueger, J. J., Schnackenburg, B., Simone, R. D., Berger, F. F., Juraszek, A. L., Meinzer, H.-P., et al. (2008) · The Annals of Thoracic Surgery · doi:10.1016/j.athoracsur.2007.06.001 · Cited by 115
Interactive Diffusion Tensor Tractography Visualization for Neurosurgical Planning
Golby, A. J., Kindlmann, G., Norton, I. H., Yarmarkovich, A., Pieper, S. D., & Kikinis, R. (2010) · Neurosurgery · doi:10.1227/neu.0b013e3182061ebb · Cited by 113
Three-dimensional printing of models for surgical planning in patients with primary cardiac tumors
Schmauß, D., Gerber, N., & Sodian, R. (2013) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2012.12.030 · Cited by 110
Cerebrovascular Biomodeling for Aneurysm Surgery
Wurm, G., Lehner, M., Tomancok, B., Kleiser, R., & Nußbaumer, K. (2011) · Surgical Innovation · doi:10.1177/1553350610395031 · Cited by 106
Selective laser sintering technology for customized fabrication of facial prostheses
Wu, G., Zhou, B., Bi, Y., & Zhao, Y. (2008) · Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(08)60138-9 · Cited by 106
Neurovascular Modeling: Small-Batch Manufacturing of Silicone Vascular Replicas
Chueh, J.-Y., Wakhloo, A. K., & Gounis, M. (2009) · American Journal of Neuroradiology · doi:10.3174/ajnr.a1543 · Cited by 106
Sodian, R., Weber, S., Markert, M., Loeff, M., Lueth, T. C., Weis, F. C., Daebritz, S. H., Malec, E. J., Schmitz, C., & Reichart, B. (2008) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2008.03.055 · Cited by 105
A Low-Cost Surgical Application of Additive Fabrication
Watson, R. A. (2014) · Journal of surgical education · doi:10.1016/j.jsurg.2013.10.012 · Cited by 102
Use of rapid prototyping models in the planning of percutaneous pulmonary valved stent implantation
Armillotta, A., Bonhoeffer, P., Dubini, G., Ferragina, S., Migliavacca, F., Sala, G., & Schievano, S. (2007) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1243/09544119jeim83 · Cited by 102
Li, J., Hsu, Y., Luo, E., Khadka, A., & Hu, J. (2010) · Aesthetic Plastic Surgery · doi:10.1007/s00266-010-9602-y · Cited by 102
Automatic visual to tactile translation. II. Evaluation of the TACTile image creation system
Way, T., & Barner, K. E. (1997) · IEEE Transactions on Rehabilitation Engineering · doi:10.1109/86.559354 · Cited by 88
Sodian, R., Schmauß, D., Schmitz, C., Bigdeli, A. K., Haeberle, S., Schmoeckel, M., Markert, M., Lueth, T. C., Freudenthal, F. P., Reichart, B., et al. (2009) · The Annals of Thoracic Surgery · doi:10.1016/j.athoracsur.2009.03.014 · Cited by 79
Three-Dimensional Ultrasound-Derived Physical Mitral Valve Modeling
Witschey, W. R. T., Pouch, A. M., McGarvey, J. R., Ikeuchi, K., Contijoch, F. J., Levack, M. M., Yushkevick, P. A., Sehgal, C. M., Jackson, B. M., Gorman, R. C., et al. (2014) · The Annals of Thoracic Surgery · doi:10.1016/j.athoracsur.2014.04.094 · Cited by 71
Rapid manufacturing techniques for the tissue engineering of human heart valves
Lueders, C., Jastram, B., Hetzer, R., & Schwandt, H. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezt510 · Cited by 70
3D printing of the liver in living donor liver transplantation
Ikegami, T., & Maehara, Y. (2013) · Nature Reviews Gastroenterology & Hepatology · doi:10.1038/nrgastro.2013.195 · Cited by 68
Wozniak, K. J., Rzepecka-Woźniak, E., Moskała, A., Pohl, J., Latacz, K., & Dybała, B. (2012) · Forensic Science International · doi:10.1016/j.forsciint.2012.06.012 · Cited by 64
Tissue Engineering of Human Nasal Alar Cartilage Precisely by Using Three-Dimensional Printing
Xu, Y., Fan, F., Kang, N., Wang, S., You, J., Wang, H., & Zhang, B. (2014) · Plastic & Reconstructive Surgery · doi:10.1097/prs.0000000000000856 · Cited by 58
3D printing for the many, not the few
Fullerton, J. N., Frodsham, G., & Day, R. M. (2014) · Nature Biotechnology · doi:10.1038/nbt.3056 · Cited by 57
Bos, E. J., Scholten, T., Song, Y., Verlinden, J. C., Wolff, J., Forouzanfar, T., Helder, M. N., & van Zuijlen, P. P. M. (2015) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2014.12.016 · Cited by 54
Chae, M. P., Hunter‐Smith, D. J., Silva, I. D., Tham, S., Spychal, R., & Rozen, W. M. (2015) · Journal of Reconstructive Microsurgery · doi:10.1055/s-0035-1549006 · Cited by 47
Self-citationCiocca, L., Crescenzio, F. D., Fantini, M., & Scotti, R. (2009) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255840903251304 · Cited by 47
Design and Rapid Manufacturing of anatomical prosthesis for facial rehabilitation
Fantini, M., Crescenzio, F. D., & Ciocca, L. (2012) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-012-0159-7 · Cited by 43
Patient specific biomodel of the whole aorta - the importance of calcified plaque removal
Håkansson, Rantatalo, Hansen, & Wanhainen (2011) · VASA · doi:10.1024/0301-1526/a000148 · Cited by 43
Oculo-facial rehabilitation after facial cancer removal
Ciocca, L., & Scotti, R. (2013) · Prosthetics and Orthotics International · doi:10.1177/0309364613512368 · Cited by 36
Fitzwater, K. L., Marcellin‐Little, D. J., Harrysson, O. L. A., Osborne, J. A., & Poindexter, E. C. (2011) · American Journal of Veterinary Research · doi:10.2460/ajvr.72.9.1178 · Cited by 34
Design and manufacturing of ear prosthesis by means of rapid prototyping technology.
Crescenzio, F. D., Fantini, M., Ciocca, L., Persiani, F., & Scotti, R. (2011) · PubMed · doi:10.1243/09544119jeim856 · Cited by 32
Tsai, M.-J., & Wu, C.-T. (2014) · BioMedical Engineering OnLine · doi:10.1186/1475-925x-13-57 · Cited by 31
Nishimoto, S., Sotsuka, Y., Kawai, K., et al. (2014) · Plastic & Reconstructive Surgery · doi:10.1097/prs.0000000000000263 · Cited by 21
(2019) · Surgery Current Research · doi:10.4172/2161-1076 · Cited by 8
Cited by
The Role of 3D Printing in Medical Applications: A State of the Art
Aimar, A., Palermo, A., & Innocenti, B. (2019) · Journal of Healthcare Engineering · doi:10.1155/2019/5340616 · Cited by 685
Advantages and disadvantages of 3-dimensional printing in surgery: A systematic review
Martelli, N., Serrano, C., van den Brink, H., Pineau, J., Prognon, P., Borget, I., & El Batti, S. (2016) · Surgery · doi:10.1016/j.surg.2015.12.017 · Cited by 681
Current and emerging applications of 3D printing in medicine
Liaw, C.-Y., & Guvendiren, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7279 · Cited by 604
Lim, K. H. A., Loo, Z. Y., Goldie, S. J., Adams, J. W., & McMenamin, P. G. (2016) · Anatomical Sciences Education · doi:10.1002/ase.1573 · Cited by 494
Self-citation3D printing technology; methods, biomedical applications, future opportunities and trends
Bozkurt, Y., & Karayel, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.050 · Cited by 384
Metadata
- Authors
- Chae, M. P., Rozen, W. M., McMenamin, P. G., Findlay, M. W., Spychal, R. T., & Hunter-Smith, D. J.
- Venue
- Frontiers in Surgery
- Publisher
- Frontiers Media SA
- Published
- 2015-06-16
- Volume
- 2
- Pages
- 25-25
- ISSN
- 2296-875X (ISSN-L)
- OpenAlex
- W1618406031
- Cited by
- 377
- References
- 67
- FWCI
- 19.03
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.