Hardware-In-The-Loop and Software-In-The-Loop Testing of the MOVE-II CubeSat
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This article reports the ongoing work on an environment for hardware-in-the-loop (HIL) and software-in-the-loop (SIL) tests of CubeSats and the benefits gained from using such an environment for low-cost satellite development. The satellite tested for these reported efforts was the MOVE-II CubeSat, developed at the Technical University of Munich since April 2015. The HIL environment has supported the development and verification of MOVE-II’s flight software and continues to aid the MOVE-II mission after its launch on 3 December 2018. The HIL environment allows the satellite to interact with a simulated space environment in real-time during on-ground tests. Simulated models are used to replace the satellite’s sensors and actuators, providing the interaction between the satellite and the HIL simulation. This approach allows for high hardware coverage and requires relatively low development effort and equipment cost compared to other simulation approaches. One key distinction from other simulation environments is the inclusion of the electrical domain of the satellite, which enables accurate power budget verification. The presented results include the verification of MOVE-II’s attitude determination and control algorithms, the verification of the power budget, and the training of the operator team with realistic simulated failures prior to launch. This report additionally presents how the simulation environment was used to analyze issues detected after launch and to verify the performance of new software developed to address the in-flight anomalies prior to software deployment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Verification of a CubeSat via hardware-in-the-loop simulation
Corpino, S., & Stesina, F. (2014) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2014.130370 · Cited by 45
Cited by
Kerrouche, K. D. E., Seddjar, A., Khorchef, N., Bendoukha, S. A., Wang, L., & Aoudeche, A. (2022) · Automatika · doi:10.1080/00051144.2022.2065420 · Cited by 21
“− Make sure to fulfil the recommended environmental qualification (using an ElectroMagnetic Compatibility (EMC) chamber, mechanical vibration, and a thermal vacuum chamber) to decide whether the designed EPS modules are qualified for space or not, so, more luck in the launch opportunity [83], − Come up with more hardw…”
Filho, E. M., Seman, L. O., Rigo, C. A., Nicolau, V. D. P., Ovejero, R. G., & Leithardt, V. R. Q. (2020) · Energies · doi:10.3390/en13246691 · Cited by 19
Investigation of a CubeSat in Orbit Anomaly through Verification on Ground
Stesina, F., & Corpino, S. (2020) · Aerospace · doi:10.3390/aerospace7040038 · Cited by 11
Shim, H., Kim, O.-J., Park, M., Choi, M., & Kee, C. (2023) · IEEE Access · doi:10.1109/access.2023.3294565 · Cited by 9
Metadata
- Authors
- Kiesbye, J., Messmann, D., Preisinger, M., Reina, G., Nagy, D., Schummer, F., Mostad, M., Kale, T., & Langer, M.
- Venue
- Aerospace
- Publisher
- MDPI AG
- Published
- 2019-12-01
- Volume
- 6
- Issue
- 12
- Pages
- 130
- ISSN
- 2226-4310 (ISSN-L)
- OpenAlex
- W2990779576
- Cited by
- 45
- References
- 1
- FWCI
- 2.75
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.