CoChat

Numerical Aspects of Particle-in-Cell Simulations for Plasma-Motion Modeling of Electric Thrusters

Open access

The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.

Abstract

The present work is focused on a detailed description of an in-house, particle-in-cell code developed by the authors, whose main aim is to perform highly accurate plasma simulations on an off-the-shelf computing platform in a relatively short computational time, despite the large number of macro-particles employed in the computation. A smart strategy to set up the code is proposed, and in particular, the parallel calculation in GPU is explored as a possible solution for the reduction in computing time. An application on a Hall-effect thruster is shown to validate the PIC numerical model and to highlight the strengths of introducing highly accurate schemes for the electric field interpolation and the macroparticle trajectory integration in the time. A further application on a helicon double-layer thruster is presented, in which the particle-in-cell (PIC) code is used as a fast tool to analyze the performance of these specific electric motors.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/aerospace8050138

Cites

44 of 44 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 The two-dimensional computational domain. Blue, black, green, and red dots represent the cell centers, the nodes, the neutral macroparticles, and the ion macroparticles, respectively ( a ) and the typical PIC workflow ( b ). Figure 1. The two-dimensional computational domain. Blue, black, green, and red dots represent the cell centers, the nodes, the neutral macroparticles, and the ion macroparticles, respectively ( a ) and the typical PIC workflow ( b ).
Figure 1 The two-dimensional computational domain. Blue, black, green, and red dots represent the cell centers, the nodes, the neutral macroparticles, and the ion macroparticles, respectively ( a ) and the typical PIC workflow ( b ). Figure 1. The two-dimensional computational domain. Blue, black, green, and red dots represent the cell centers, the nodes, the neutral macroparticles, and the ion macroparticles, respectively ( a ) and the typical PIC workflow ( b ).CC-BY · From the PDF
Figure 2 A representation of the ray-tracing method. Figure 2. Arepresentation of the ray-tracing method.
Figure 2 A representation of the ray-tracing method. Figure 2. Arepresentation of the ray-tracing method.CC-BY · From the PDF
Figure 3 Illustrating the macroparticle list ordering.
Figure 3 Illustrating the macroparticle list ordering.CC-BY · From the PDF
Figure 4 A representation of the computational domain. The motor head is placed at 0.6 m, while the outflow at 0 m ( a ): and the one-dimensional domain. Blue dots represent the cells, while black dots represent the nodes ( b ). Figure 4. Arepresentation of the computational domain. The motor head is placed at 0.6 m, while the outflow at 0 m ( a ): and the one-dimensional domain. Blue dots represent the cells, while black dots represent the nodes ( b ).
Figure 4 A representation of the computational domain. The motor head is placed at 0.6 m, while the outflow at 0 m ( a ): and the one-dimensional domain. Blue dots represent the cells, while black dots represent the nodes ( b ). Figure 4. Arepresentation of the computational domain. The motor head is placed at 0.6 m, while the outflow at 0 m ( a ): and the one-dimensional domain. Blue dots represent the cells, while black dots represent the nodes ( b ).CC-BY · From the PDF
Figure 5 A representation of the electric field and the electron temperature. Figure 5. Arepresentation of the electric field and the electron temperature.
Figure 5 A representation of the electric field and the electron temperature. Figure 5. Arepresentation of the electric field and the electron temperature.CC-BY · From the PDF
Image 6
CC-BY · From the PDF
Image 7
CC-BY · From the PDF
( a ) Leapfrog vs RK4 using the cubic bi-spline interpolation. ( b ) Cubic bi-spline interpolation vs bi-linear interpolation using the leapfrog.
( a ) Leapfrog vs RK4 using the cubic bi-spline interpolation. ( b ) Cubic bi-spline interpolation vs bi-linear interpolation using the leapfrog.CC-BY · From the PDF
Figure 9 A representation of the motion of 5 ion macro-particles in an electric field generated by 2 thin concentric plates by employing the cubic bi-spline and the linear interpolation. Figure 9. Arepresentation of the motion of 5 ion macro-particles in an electric field generated by 2 thin concentric plates by employing the cubic bi-spline and the linear interpolation.
Figure 9 A representation of the motion of 5 ion macro-particles in an electric field generated by 2 thin concentric plates by employing the cubic bi-spline and the linear interpolation. Figure 9. Arepresentation of the motion of 5 ion macro-particles in an electric field generated by 2 thin concentric plates by employing the cubic bi-spline and the linear interpolation.CC-BY · From the PDF
Image 10
CC-BY · From the PDF
Figure 12 Effect of the ionization source rate on the electric potential at a constant electron temperature of 10 eV. Figure 12. Effect of the ionization source rate on the electric potential at a constant electron temperature of 10 eV.
Figure 12 Effect of the ionization source rate on the electric potential at a constant electron temperature of 10 eV. Figure 12. Effect of the ionization source rate on the electric potential at a constant electron temperature of 10 eV.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 44 references

Research works printed but not linked: 2

  1. Hey, F., Brandt, T., Kornfeld, G., Braxmaier, C., Tajmar, M., and Johann, U. (2015, January 4–10). Downscaling a hempt to micro-newton thrust levels: Current status and latest result. Proceedings of the Joint Conference of 30th International Symposium on Space Technology and Science, 34th International Electric Propulsion Conference and 6th Nano-satellite Symposium, Hyogo-Kobe, Japan.
  2. Chiko, 2017, To the generalization of the Newton-Kantorovich theorem. Visnyk of VN Karazin Kharkiv National University, Ser. Math. Appl. Math. Mech., 85, 62

Cited by

Metadata

Authors
Gallo, G., Isoldi, A., Del Gatto, D., Savino, R., Capozzoli, A., Curcio, C., & Liseno, A.
Affiliations
  • University of Naples Federico II (IT)
  • Department of Industrial Engineering—Aerospace Division, University of Naples “Federico II”, Piazzale Tecchio, 80-80125 Naples, Italy
Corresponding author
Gallo, Giuseppe
Venue
Aerospace
Publisher
MDPI AG
Published
2021-05-15
Volume
8
Issue
5
Pages
138
ISSN
2226-4310 (ISSN-L)
OpenAlex
W3163251061
Cited by
8
References
44
Citations by year
2026: 1 · 2025: 3 · 2023: 1 · 2022: 1 · 2021: 2
FWCI
0.29
Type
journal article
Language
en
Open access
Locations
  • Aerospace (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-Pressure Plasma Processing and Diagnostics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Vacuum and Plasma Arcs
  • Physical Sciences › Physics and Astronomy › Nuclear and High Energy Physics › Magnetic confinement fusion research
Keywords
particle-in-cell simulation, electric thrusters, Hall thruster, GPU parallel computing, plasma simulation, electric propulsion

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.