Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 75 of the 75 references it cites were found in a registry or an index; none of the 32 sources its claims cite is checked for support yet.

Effects on Biodiesel Production Caused by Feed Oil Changes in a Continuous Stirred-Tank Reactor

Open access
Castillo Gónzalez, Juan P., Álvarez Gutiérrez, Peggy E., Adam Medina, Manuel, López Zapata, Betty Y., Ramírez Guerrero, Gerardo V., Vela Valdés, Luis G. · 2020 · Applied Sciences

Abstract

Continuous production processes and an adequate supply of raw materials are necessary to satisfy the growing demand for biodiesel. The use of different feed oils could be necessary to ensure sufficient supply for biodiesel production in certain circumstances; however, changing feed oil during the operation of a continuous reactor causes process disturbances. The present study analyses the effect of feed oil changes on the continuous operation of a industrial continuous stirred-tank reactor (CSTR) using a model which takes the dynamics of oil changes into account. The models previously reported only consider the operation of reactor with only one vegetable oil. The model in this work was developed by mass and energy balances. A methodology to model oil changes is presented. Glycerides and esters were characterized using adequate approaches. Moreover, accurate methods for predicting essential properties in the biodiesel manufacturing were used for the estimation of their thermo-physical properties. The kinetic parameters of the transesterifications were calculated from consistent studies selected from an exhaustive literature revision. The results show that temperature is practically not affected after oil changes; however, the ester concentration varies considerably. The ester mass fraction varying by up to 22.07% after an disturbance.

Overview

CoChat Summary

## TL;DR

The paper proposes a first-principles methodology to model a continuous stirred-tank reactor (CSTR) for biodiesel production when the feed oil changes during continuous operation. Simulations with palm, mustard, and sunflower oils show that oil changes significantly affect ester concentration/mass fraction, while reactor temperature changes are small.

## Key findings

  • The model was evaluated with transesterification simulations for pure oils, giving average relative errors of 4.39% for palm oil, 5.54% for mustard oil, and 3.25% for sunflower oil over a 30-min reaction time.
  • In the CSTR disturbance simulations, the temperature variation was only 1.48% in the worst case, indicating feed oil changes had little effect on reactor temperature.
  • Feed oil changes caused substantial changes in ester output: the mass fraction of methyl esters changed by 10.90% for the palm → mustard change, 22.07% for mustard → sunflower, and about 9% for sunflower → palm.
  • The paper states that palm oil produced about twice as many esters as mustard oil, and that ester production depends mainly on the triglyceride concentration in the feed.

## Methods

  • The study developed a first-principles mathematical model for an industrial continuous stirred-tank reactor using mass and energy balances, with added modeling of abrupt oil-feed changes and cross-linking reactions between oils during the transition period.
  • The feed oils considered were palm, mustard, and sunflower oils; the model used literature-based kinetic parameters and property-estimation methods, with simulations initialized assuming the reactor was loaded with palm oil.
  • Simulations were run in Matlab/Simulink; the pure-oil transesterification models were solved with ODE45, and the reactor differential-equation system was solved with ODE23t.

## Limitations

  • The paper explicitly states that the model has not been validated due to the lack of experimental data.
  • The methodology simplifies characterization by treating glycerides and esters with similar properties and by using three reversible reactions / six rate constants for transesterification; the text notes that this is a simplification relative to the many possible glyceride and ester species, which may reduce accuracy.
  • Evident from the text: the simulation study is limited to three oils and to abrupt feed changes in a specific CSTR setup, so broader generalization to other feedstocks or disturbance types is not directly supported by the paper.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/app10030992

Cites

75 of 75 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Methodology of the research work.
Figure 1 Methodology of the research work.CC-BY · From the PDF
Figure 2 Different reactions occurring in the reactor: ( a ) nominal operation with a type-i oil; ( b ) transitory period after an oil change when two different transesterification processes and cross-linking reactions occur in the reactor tank; and, ( c ) nominal operation with a type-j oil.
Figure 2 Different reactions occurring in the reactor: ( a ) nominal operation with a type-i oil; ( b ) transitory period after an oil change when two different transesterification processes and cross-linking reactions occur in the reactor tank; and, ( c ) nominal operation with a type-j oil.CC-BY · From the PDF
Figure 3 Experimental vs. simulation data for the transesterification reactions for different vegetable oils. Mass fraction of methyl esters during the transesterification reaction of the following: ( a ) palm oil (60 ◦ C, 1 wt% catalyst), ( b ) mustard oil (60 ◦ C, 1 wt% catalyst), and ( c ) sunflower oil (35 ◦ C, 0.5 wt% catalyst) [42,43].
Figure 3 Experimental vs. simulation data for the transesterification reactions for different vegetable oils. Mass fraction of methyl esters during the transesterification reaction of the following: ( a ) palm oil (60 ◦ C, 1 wt% catalyst), ( b ) mustard oil (60 ◦ C, 1 wt% catalyst), and ( c ) sunflower oil (35 ◦ C, 0.5 wt% catalyst) [42,43].CC-BY · From the PDF
Figure 4 Concentration of methyl esters after changes with different types of feed oil: ( a ) palm to mustard; ( b ) mustard to sunflower; and ( c ) sunflower to palm.
Figure 4 Concentration of methyl esters after changes with different types of feed oil: ( a ) palm to mustard; ( b ) mustard to sunflower; and ( c ) sunflower to palm.CC-BY · From the PDF
Figure 5 Effect of the oil changes in the mass fraction of esters.
Figure 5 Effect of the oil changes in the mass fraction of esters.CC-BY · From the PDF
Figure 6 Triglycerides from palm oil, mustard oil, and formed in the cross-linking reactions after the change from palm to mustard oil.
Figure 6 Triglycerides from palm oil, mustard oil, and formed in the cross-linking reactions after the change from palm to mustard oil.CC-BY · From the PDF

Verification

Claims the paper makes

0 Valid · 1 Not valid · 21 Not checked · 54 Own results and interpretations

56 more claims

Create a free account to see all 76 claims and to verify the 1 reference still open.

See all claims — free account
  • It may state two separate claims as one. 7
  • Probably not a substantial claim. 9

Create a free account to see these claims.

Citations

Cites

Research works printed but not linked: 3

  1. Montriwasuwat, N., Kittisupakorn, P., and Lersbamrungsuk, V. (2012, January 14–16). A partial differential equations model predictive control of heterogeneous transesterification process for biodiesel production in tubular reactor. Proceedings of the MultiConference of Engineers and Computer Scientists, Hong Kong, China.
  2. Medina, 2017, Predictive control of biodiesel transesterification in a batch reactor, Revista Mexicana de Ingeniería Química, 16, 651
  3. Luyben, W.L. (1989). Process Modeling, Simulation and Control for Chemical Engineers, McGraw-Hill Higher Education.

Cited by

See all 22

Metadata

Authors
Castillo Gónzalez, J. P., Álvarez Gutiérrez, P. E., Adam Medina, M., López Zapata, B. Y., Ramírez Guerrero, G. V., & Vela Valdés, L. G.
Affiliations
  • Department of Electronical Engineering, Tecnológico Nacional de México/CENIDET, 62490 Cuernavaca, Morelos, Mexico
  • CONACYT, Tecnológico Nacional de México/Instituto Tecnológico de Tuxtla Gutiérrez, Carr. Panamericana Km. 1080 Col. Juan Crispín, 29050 Tuxtla Gutiérrez, Chiapas, Mexico
  • Management Science School, Universidad de Ciencias y Artes de Chiapas, 29018 Tuxtla Gutiérrez, Chiapas, Mexico
Venue
Applied Sciences
Publisher
MDPI AG
Published
2020-02-03
Volume
10
Issue
3
Pages
992
ISSN
2076-3417 (ISSN-L)
OpenAlex
W3004787971
Cited by
22
References
72
Citations by year
2026: 2 · 2025: 1 · 2024: 6 · 2023: 7 · 2022: 2 · 2021: 1 · 2020: 3
FWCI
1.02
Type
journal article
Language
en
Open access
Locations
  • Applied Sciences (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Energy › Fuel Technology › Biodiesel Production and Applications
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Chemical Engineering › Catalysis › Catalysis and Hydrodesulfurization Studies
Keywords
biodiesel production, continuous stirred tank reactor, transesterification, process disturbances, mass and energy balance, glycerides, esters, thermophysical properties, transesterification kinetics, vegetable oils

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.