A Systematic Approach for Evaluating the Adoption of Additive Manufacturing in the Product Design Process
Open accessThe DOI matches its Crossref record; 37 of the 39 references it cites were found in a registry or an index.
Abstract
Additive Manufacturing (AM) technologies have expanded the possibility of producing unconventional geometries, also increasing the freedom of design. However, in the designer’s everyday work, the decision regarding the adoption of AM for the production of a component is not straightforward. In fact, it is necessary to process much information regarding multiple fields to exploit the maximum potential of additive production. For example, there is a need to evaluate the properties of the printable materials, their compatibility with the specific application, redesign shapes accordingly to AM limits, and conceive unique and complex products. Additionally, procurement and logistics evaluations, as well as overall costs possibly extending to the entire life cycle, are necessary to come to a decision for a new and radical solution. In this context, this paper investigates the complex set of information involved in this process. Indeed, it proposes a framework to support and guide a designer by means of a structured and algorithmic procedure to evaluate the opportunity for the adoption of AM and come to an optimal design. A case study related to an ultralight aircraft part is reported to demonstrate the proposed decision process.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“AM provides increased design freedom, allowing unconventional geometries to be produced [109].”
From Transformative Procurement Trends: Integrating Industry 4.0 Technologies for Enhanced Procurement Processes (2023) · cites this paper as [109]
In the citing paper
“By addressing these challenges and embracing a comprehensive perspective, AM has the potential to optimize supply chains, enhance industrial performance, and unlock new possibilities for future advancements [109].”
From Transformative Procurement Trends: Integrating Industry 4.0 Technologies for Enhanced Procurement Processes (2023) · cites this paper as [109]
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431 · cited 1×
“In particular, design leaders complain about [13,14]: 1.”
BackgroundGibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Materials Selection in Mechanical Design
(2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,679
Fundamentals of Decision Making and Priority Theory With the Analytic Hierarchy Process
Saaty, T. L. (2000) · Medical Entomology and Zoology · Cited by 2,635
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Rough sets theory for multicriteria decision analysis
Greco, S., Matarazzo, B., & Slowinski, R. (2001) · European Journal of Operational Research · doi:10.1016/s0377-2217(00)00167-3 · Cited by 1,637
Pahl, G., Beitz, W., Feldhusen, J., & Grote, K.-H. (2007) · Springer eBooks · doi:10.1007/978-1-84628-319-2 · Cited by 1,566
Multiple Criteria Decision Analysis: State of the Art Surveys
(2016) · International Series in Operations Research & Management Science · doi:10.1007/978-1-4939-3094-4 · Cited by 1,081
Fundamentals of the Analytic Hierarchy Process
Saaty, T. L. (2001) · Managing Forest Ecosystems · doi:10.1007/978-94-015-9799-9_2 · Cited by 835
Making sense of 3-D printing: Creating a map of additive manufacturing products and services
Conner, B. P., Manogharan, G. P., Martof, A. N., Rodomsky, L. M., Rodomsky, C. M., Jordan, D. C., & Limperos, J. W. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.005 · Cited by 750
Cited by
Althabatah, A., Yaqot, M., Menezes, B., & Kerbache, L. (2023) · Logistics · doi:10.3390/logistics7030063 · Cited by 108
“In this regard, Raffaeli et al. [109] investigate the adoption of AM technology in production design.”
BackgroundInfluentialBarbieri, L., & Muzzupappa, M. (2022) · Applied Sciences · doi:10.3390/app12042106 · Cited by 92
The benefits and barriers of additive manufacturing for circular economy: A framework proposal
Tavares, T. M., Ganga, G. M. D., Filho, M. G., & Rodrigues, V. P. (2023) · Sustainable Production and Consumption · doi:10.1016/j.spc.2023.03.006 · Cited by 87
Lettori, J., Raffaeli, R., Bilancia, P., Peruzzini, M., & Pellicciari, M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10432-8 · Cited by 29
Self-citationDesign tools for metal additive manufacturing: a critical and perspective overview
Trovato, M., & Cicconi, P. (2023) · Procedia CIRP · doi:10.1016/j.procir.2023.03.151 · Cited by 21
Design for Additive Manufacturing: Methods and Tools
Mandolini, M., Pradel, P., & Cicconi, P. (2022) · Applied Sciences · doi:10.3390/app12136548 · Cited by 17
Ferreira, B., Brandão, F., Borille, A. V., Gonçalves, A., Leite, M., & Ribeiro, I. (2025) · Progress in Additive Manufacturing · doi:10.1007/s40964-025-01249-4 · Cited by 20
Predicting geometric errors and failures in additive manufacturing
Ntousia, M., Fudos, I., Moschopoulos, S., & Stamati, V. (2023) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2022-0402 · Cited by 14
A Review of Simulation Tools Utilization for the Process of Laser Powder Bed Fusion
Kaščák, Ľ., Varga, J., Bidulská, J., Bidulský, R., & Kvačkaj, T. (2025) · Materials · doi:10.3390/ma18040895 · Cited by 15
Dual design for additive manufacturing in engineering design: a systematic literature review
Dash, S., Nordin, A., & Johansson, G. (2025) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2024-0245 · Cited by 11
Research on Evaluation Methods of Complex Product Design Based on Hybrid Kansei Engineering Modeling
Zhu, T., Wu, C.-J., Zhang, Z., Li, Y., & Wu, T. (2025) · Symmetry · doi:10.3390/sym17020306 · Cited by 11
Mosaoy, D. J. J. A. (2023) · International Journal of Engineering Business Management · doi:10.1177/18479790231183511 · Cited by 6
Design for Additive Manufacturing: Methods and Tools
Mandolini, M., Pradel, P., & Cicconi, P. (2022) · MDPI eBooks · doi:10.3390/books978-3-0365-4926-2 · Cited by 6
Additive Manufacturing adoption in aviation: A literature review
Oliveira, J., & Espadinha-Cruz, P. (2025) · Procedia Computer Science · doi:10.1016/j.procs.2025.01.151 · Cited by 8
Value Engineering: Index for Cost Reduction in the Manufacturing Environment
Ongbali, S. O., Awoyemi, O. O., Salawu, E. Y., & Dirisu, J. O. (2024) · International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG) · doi:10.1109/seb4sdg60871.2024.10630262 · Cited by 5
Dovzhenko, N. N., Demchenko, A. I., Bezrukikh, A. A., Zhuchenko, K. S., Dovzhenko, I. N., Ворошилов, Д. С., & Dementeva, I. S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10310-3 · Cited by 5
Feasibility and suitability analysis of additive manufacturing in pre-conceptual design phase
Hajali, T., Brahma, A., Isaksson, O., & Malmqvist, J. (2025) · Journal of Engineering Design · doi:10.1080/09544828.2025.2504306 · Cited by 3
Tkachenko, I. S., Kurkin, E. I., Lukyanov, O. E., Kishov, E., Galinzoga-Zamora, J., Смелов, В. Г., & Chertykovtseva, V. (2022) · Ontology of Designing · doi:10.18287/2223-9537-2022-12-4-532-546 · Cited by 2
Process Product Design Based on Multimode Interaction Design
Liu, C. (2021) · Scientific Programming · doi:10.1155/2021/1817746 · Cited by 2
Transdisciplinary Evaluation of Simulation Software for Industry 4.0 Assembly Lines
Lettori, J., Borsato, M., Raffaeli, R., Pellicciari, M., Grandi, F., & Peruzzini, M. (2022) · Advances in transdisciplinary engineering · doi:10.3233/atde220671 · Cited by 2
Self-citationReviewing Part Identification for Additive Manufacturing and Assessing Future Fields of Research
Kolter, M., Collet, A., & Schleifenbaum, J. H. (2022) · doi:10.1520/stp164420210135 · Cited by 1
Analysis of the Requirements of a Framework for the Hybrid Manufacturing of Large Parts
Lettori, J., Raffaeli, R., Peruzzini, M., & Pellicciari, M. (2021) · doi:10.14733/cadconfp.2021.182-186
Self-citationProduct Intelligent Design Model Based on Genetic Optimization Algorithm
Liu, T., & Shukla, S. K. (2022) · Lecture notes on data engineering and communications technologies · doi:10.1007/978-3-030-96908-0_62
Nieto, D. M., Pintos, P. B., & Sánchez, D. M. (2022) · Wiley eBooks · doi:10.1002/9783527835478.ch22
Putro, G. M., Ristono, A., Wahyuningsih, T., & Prijoto, P. (2025) · JAMAS Jurnal Abdi Masyarakat · doi:10.62085/jms.v3i1.171
Hajali, T., Brahma, A., Eckert, C. M., & Isaksson, O. (2026) · Proceedings of the Design Society · doi:10.1017/pds.2026.10555
Active Surface Clustering for Component Generation from System Models
Hartmann, G., Jacobs, G., Spütz, K., & Scholl, S. F. (2026) · Systems · doi:10.3390/systems14091188
Metadata
- Authors
- Raffaeli, R., Lettori, J., Schmidt, J., Peruzzini, M., & Pellicciari, M.
- Affiliations
- University of Modena and Reggio Emilia (IT)
- Corresponding author
- Raffaeli, Roberto
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2021-01-28
- Volume
- 11
- Issue
- 3
- Pages
- 1210
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W3128204441
- Cited by
- 26
- References
- 39
- Citations by year
- 2026: 2 · 2025: 6 · 2024: 1 · 2023: 5 · 2022: 10 · 2021: 2
- FWCI
- 1.46
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Applied Sciences (publishedVersion, cc-by)
- IRIS UNIMORE (University of Modena and Reggio Emilia) (submittedVersion, cc-by)
- Archivio istituzionale della ricerca (Alma Mater Studiorum Università di Bologna) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Manufacturing Process and Optimization
- Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
- Keywords
- additive manufacturing, technology adoption, product design process, design decision support, printable materials, design for additive manufacturing, life cycle cost
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.