Design of an Atypical Construction of Equipment for Additive Manufacturing with a Conceptual Solution of a Printhead Intended for the Use of Recycled Plastic Materials
Open accessThe DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
This article presents the variability of Fused deposition modelling (FDM) technology and the possibilities of its use in the design and implementation of a prototype atypical device. The assumptions of the behaviour of individual components and subsystems of the design result from an extensive application of the finite element method and motion analysis of subsystems and various parts of the structure. The use of this method to such an extent accelerated the design process and its implementation. The proposal itself reflects the current state of this technology and its focus is on improving sustainable development. As is generally known, great efforts are currently being made to reduce plastic waste volume and its environmental burden. The proposed concept is modified to replace the final treatment of the top layers of the models, called “ironing” by non-planar layering of material. At the same time, it points out the advantages of this method in reducing energy requirements and the time required to produce models. The conclusion is a conceptual design of a printhead for a proposed prototype, designed to use recycled FDM, intending to streamline the possibility of recycling with little serial and piece production. This process thus closes the circle of opportunities published by us, which in the future can contribute to the optimisation of this technology towards increasing the efficiency of resource use, reduction of energy demands and environmental burden.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanistic models for additive manufacturing of metallic components
Wei, H. L., Mukherjee, T., Zhang, W., Zuback, J. S., Knapp, G. L., De, A., & DebRoy, T. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100703 · Cited by 530 · cited 1×
“This solution consisted of analyses of the model’s location within the virtual subsystem and subsequent simulation of the effects acting on individual components [27,28].”
MethodWelding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating
Sweeney, C. B., Lackey, B. A., Pospisil, M. J., Achee, T. C., Hicks, V. K., Moran, A. G., Teipel, B. R., Saed, M. A., & Green, M. J. (2017) · Science Advances · doi:10.1126/sciadv.1700262 · Cited by 313 · cited 5×
“Divide the into a ixture of tensile and shear forces, and the theoretical assu ption of the distribution of these forces depending on the increased displace ent of the layers caused by stress can be seen in Figure 5 [14,15].”
BackgroundInfluentialExpanding capabilities of additive manufacturing through use of robotics technologies: A survey
Bhatt, P. M., Malhan, R. K., Shembekar, A. V., Yoon, Y. J., & Gupta, S. K. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100933 · Cited by 180
Digital Twin of Experimental Smart Manufacturing Assembly System for Industry 4.0 Concept
Židek, K., Piteľ, J., Adámek, M., Lazorík, P., & Hošovský, A. (2020) · Sustainability · doi:10.3390/su12093658 · Cited by 177 · cited 1×
“Due to current trends and developments in this technology, improvement of operating parameters of production and its application to sophisticated equipment types, innovation is necessary for the production process itself [6,7].”
Background3D Printing of Nonplanar Layers for Smooth Surface Generation
Ahlers, D., Wasserfall, F., Hendrich, N., & Zhang, J. (2019) · IEEE International Conference on Automation Science and Engineering (CASE) · doi:10.1109/coase.2019.8843116 · Cited by 129 · cited 8×
“Such a method of layering the m terial is associated with the print surface characteristic state an th ir different properties for their orientation to the device co rdination system during printing [8,9].”
BackgroundMethodInfluentialCamposeco-Negrete, C. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05555-9 · Cited by 129 · cited 2×
“Another phase aimed at improving the state of sustainable development in FDM technology is the modification of the process characteristic of this ype of model produc ion and the recycling of plastic waste ass ciat d with production [4,5].”
BackgroundRonkay, F., Molnar, B., Gere, D., & Czigany, T. (2021) · Waste Management · doi:10.1016/j.wasman.2020.09.029 · Cited by 129 · cited 2×
“This process has proven efficient but relatively lengthy and inefficient due to the production batch [32,33].”
BackgroundTowards Distributed Recycling with Additive Manufacturing of PET Flake Feedstocks
Little, H. A., Tanikella, N. G., Reich, M. J., Fiedler, M. J., Snabes, S. L., & Pearce, J. M. (2020) · Materials · doi:10.3390/ma13194273 · Cited by 121 · cited 3×
“Towards Distributed Recycling with Additive Manufacturing of PET Flake Feedstocks.”
BackgroundVidakis, N., Petousis, M., Tzounis, L., Maniadi, A., Velidakis, E., Mountakis, N., Papageorgiou, D., Liebscher, M., & Mechtcherine, V. (2020) · Sustainability · doi:10.3390/su13010159 · Cited by 109 · cited 2×
“This process has proven efficient but relatively lengthy and inefficient due to the production batch [32,33].”
BackgroundDePalma, K., Walluk, M. R., Murtaugh, A., Hilton, J., McConky, S. P., & Hilton, B. N. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121567 · Cited by 98 · cited 2×
“Another phase aimed at improving the state of sustainable development in FDM technology is the modification of the process characteristic of this ype of model produc ion and the recycling of plastic waste ass ciat d with production [4,5].”
BackgroundGenerating Robot Trajectories for Conformal Three-Dimensional Printing Using Nonplanar Layers
Shembekar, A. V., Yoon, Y. J., Kanyuck, A., & Gupta, S. K. (2019) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4043013 · Cited by 88
Kinematic Analysis and Prototyping of a Partially Decoupled 4-DOF 3T1R Parallel Manipulator
Richard, P.-L., Gosselin, C., & Kong, X. (2006) · Journal of Mechanical Design · doi:10.1115/1.2717611 · Cited by 74
Carbon Nanotube-Based Composite Filaments for 3D Printing of Structural and Conductive Elements
Podsiadły, B. J., Matuszewski, P., Skalski, A., & Słoma, M. (2021) · Applied Sciences · doi:10.3390/app11031272 · Cited by 71 · cited 1×
“Given the knowledge already gained related to structures, control, kinematics and data processing for FDM technology, we can create a list of basic requirements for creating an atypical structure [23].”
MethodEvaluation of the Circularity of Recycled PLA Filaments for 3D Printers
Muñoz, V. G., Muneta, M. L. M., Carrasco‐Gallego, R., Márquez, J. J., & Hidalgo-Carvajal, D. (2020) · Applied Sciences · doi:10.3390/app10248967 · Cited by 67 · cited 4×
“The issue of partial recovery of waste from individual sectors is also addressed in the publication “Evaluation of the Circularity of Recycled PLA Filaments for 3D Printers” [30].”
BackgroundInfluentialA Robotic Cell for Multi-Resolution Additive Manufacturing
Bhatt, P. M., Kabir, A. M., Malhan, R. K., Shah, B. C., Shembekar, A. V., Yoon, Y. J., & Gupta, S. K. (2019) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2019.8793730 · Cited by 63 · cited 1×
“They all work on the same principle of layering thermoplastic or other materials in planar layers [21].”
BackgroundProduction Efficiency Evaluation and Products' Quality Improvement Using Simulation
Kliment, M., Trebuňa, P., Pekarčíková, M., Straka, M., Trojan, J., & Duda, R. (2020) · International Journal of Simulation Modelling · doi:10.2507/ijsimm19-3-528 · Cited by 45
Kaščák, J., Gašpár, Š., Paško, J., Husár, J., & Knapčíková, L. (2021) · Sustainability · doi:10.3390/su13031256 · Cited by 40 · cited 10×
“Kaščak, J.; Gašpár, Š.; Paško, J.; Husár, J.; Knapčíková, L. Polylactic Acid and Its Cellulose Based Composite as a Significant Tool for the Production of Optimized Models Modified for Additive Manufacturing.”
MethodSelf-citationMcCaw, J. C. S., & Cuan‐Urquizo, E. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2019-0163 · Cited by 30 · cited 2×
“Such a method of layering the m terial is associated with the print surface characteristic state an th ir different properties for their orientation to the device co rdination system during printing [8,9].”
MethodTowards Distributed Recycling with Additive Manufacturing of PET Flake FeedstocksPreprint
Little, H. A., Tanikella, N. G., Reich, M. J., et al. (2020) · Preprints.org · doi:10.20944/preprints202007.0707.v1 · Cited by 28
Mourad, A. I., Idrisi, A. H., Christy, J. V., Thekkuden, D. T., Jassmi, H. A., Ghazal, A. M., Syam, M. M., & Qadi, O. A. A. A. (2019) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp3030074 · Cited by 26 · cited 1×
“From our perspective, this could be used in the printing of non-planar surfaces [24].”
MethodA new 6-DOF parallel robot with simple kinematic model
Seward, N., & Bonev, I. A. (2014) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2014.6907449 · Cited by 25 · cited 2×
“The Tripteron structure used for the initial model for evaluation and design [28].”
MethodVasilescu, M. D., & Fleșer, T. (2018) · Materiale Plastice · doi:10.37358/mp.18.2.5005 · Cited by 21
Coranič, T., Gašpár, Š., & Pasko, J. (2020) · Applied Sciences · doi:10.3390/app11010262 · Cited by 21 · cited 3×
“Divide them into a mixture of tensile and shear forces, and the theoretical assumption of the distribution of these forces depending on the increased displacement of the layers caused by stress can be seen in Figure 5 [14,15].”
BackgroundSelf-citationPollák, M., Kaščák, J., Telíšková, M., & Tkáč, J. (2019) · TEM Journal · doi:10.18421/tem83-02 · Cited by 17
Yoon, Y. J., Yon, M., Jung, S. E., & Gupta, S. K. (2019) · ASME International Computers in Engineering Conference and Engineering Database Symposium · doi:10.1115/detc2019-98069 · Cited by 14
NEW TECHNOLOGIES FOR SUSTAINING DEVELOPMENT IN INFRASTRUCTURE, LOGISTICS AND CONSTRUCTION INDUSTRY
Kanáliková, A., Behúnová, A., Mandičák, T., & Mésároš, P. (2019) · Acta Logistica · doi:10.22306/al.v6i4.145 · Cited by 13
Preliminary Study on a Strain Sensor Printed on 3D-plastic Surfaces for Smart Devices
Borghetti, M., & Cantù, E. (2019) · IEEE International Workshop on Metrology for Industry 4.0 & IoT (MetroInd4.0&IoT) · doi:10.1109/metroi4.2019.8792896 · Cited by 10 · cited 2×
“iven the condition of the heat block, the nozzle, and the cooling location, it is clear that its use in the production of non-planar surfaces il be significantly li ited [17].”
BackgroundAdditive technologies and 3d modeling
Sergeyeva, O. Y. (2018) · Nanotechnologies in Construction A Scientific Internet-Journal · doi:10.15828/2075-8545-2018-10-4-142-158 · Cited by 6
Research works printed but not linked: 4
- Mandicak, 2019, Progressive technologies used for sustainability in architecture, engineering and construction, Czech. J. Civ. Eng., 5, 62
- Grabara, 2019, Sustainable Development—Never Fulfilled Dream, Qual. Access Success, 20, 565
- Nowicka-Skowron, M., Grabara, J., and Kot, S. (2015). Models Based on Linear Programming. Modelling and Simulation in Management Econometric Models Used in the Management of Organizations, Springer.
- (2021, February 22). Anet E12 3D Printer: Review the Specs. Available online: https://all3dp.com/1/anet-e12-3d-printer-review/.
Cited by
Dezaki, M. L., Ariffin, M. K. A. M., Serjouei, A., Zolfagharian, A., Hatami, S., & Bodaghi, M. (2021) · Applied Sciences · doi:10.3390/app11167272 · Cited by 122
Alzyod, H., & Ficzere, P. (2024) · Scientific Reports · doi:10.1038/s41598-024-52827-5 · Cited by 39
Online Monitoring of Surface Quality for Diagnostic Features in 3D Printing
Lishchenko, N. V., Piteľ, J., & Larshin, V. (2022) · Machines · doi:10.3390/machines10070541 · Cited by 32
Poka Yoke in Smart Production Systems with Pick-to-Light Implementation to Increase Efficiency
Trojanowska, J., Husár, J., Hrehova, S., & Knapčíková, L. (2023) · Applied Sciences · doi:10.3390/app132111715 · Cited by 23
“The first part simulates the production process of the model part construction without introducing the PTL device.”
MethodSelf-citationAlzyod, H., Ficzere, P., & Borbás, L. (2024) · Discover Applied Sciences · doi:10.1007/s42452-024-06249-7 · Cited by 19
“…presents advantages such as simplified material loading and replacement procedures, as well as the opportunity to incorporate recycled materials [10–12], cost-effective maintenance [13], quick fabrication of small components with high accuracy, and it possesses the capability to create intricate…”
Metadata
- Authors
- Kaščak, J., Gašpár, Š., Paško, J., Knapčíková, L., Husár, J., Baron, P., & Török, J.
- Affiliations
- Department of Computer Aided Manufacturing Technologies, Faculty of Manufacturing Technologies with a Seat in Prešov, Technical University of Košice, Štúrova 31, 08001 Prešov, Slovakia
- Technical University of Košice (SK)
- Corresponding author
- Knapčíková, Lucia
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2021-03-25
- Volume
- 11
- Issue
- 7
- Pages
- 2928
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W3148689727
- Cited by
- 31
- References
- 28
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 6 · 2023: 3 · 2022: 12 · 2021: 4
- FWCI
- 2.03
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Applied Sciences (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Vedecká Grantová Agentúra MŠVVaŠ SR a SAV (1/0116/20)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Building and Construction › Innovations in Concrete and Construction Materials
- Physical Sciences › Engineering › Mechanical Engineering › Injection Molding Process and Properties
- Keywords
- fused deposition modeling, printhead design, plastic waste reduction, ironing, finite element analysis, motion analysis, sustainable manufacturing, energy efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.