The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
Bond Characterization in Cementitious Material Binders Using Fourier-Transform Infrared Spectroscopy
Open accessAbstract
Fourier-transform infrared (FTIR) spectroscopy is a fast and simple technique for functional group identification. This work provides a review and insight into the application and interpretation of FTIR spectroscopy for cementitious binders that comprise ordinary Portland cement, alkaline-activated binders, geopolymers, and material characterization for civil engineering material applications. This technique can be used to identify different compounds and a moiety of bond vibrations in inorganic molecules such as Si-O, -OH, H-O-H (water), C-O (carbonate or carbonation), aluminosilicate (Si-O-T, where T is Al or Si), and S-O (sulfate or gypsum) found in hydrated cement, alkaline binders, and geopolymers. The prominent bands include those representing carbonation (CO32− 1390–1475 cm−1), calcium carbonate (871, 1792–2516 cm−1), hydroxylation and water molecules (1607, 3400–3650 cm−1), strength skeletal framework compositions or Al-Si substitutions, silicate organization (C-A-S-H, N-A-S-H, or C-S-H (950–1055 cm−1), and sulfate (600–680, 1080–1100 cm−1). Some of the factors that could affect the spectra bands include elemental displacement due to changes in molar mass, activated temperature, pH, activator concentration, w/b ratio, Ca/Si ratio, Si/Al ratio, and the silica modulus (SiO2/Na2O) of the activators used in the binder synthesis. The method could be used for destructive and non-destructive testing on paste sample by using transmission and attenuated total reflectance methods, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An algorithm for the machine calculation of complex Fourier series
Cooley, J. W., & Tukey, J. W. (1965) · Mathematics of Computation · doi:10.1090/s0025-5718-1965-0178586-1 · Cited by 13,154
The Infrared Spectra of Minerals
(1974) · Mineralogical Society of Great Britain and Ireland eBooks · doi:10.1180/mono-4 · Cited by 3,086
Infrared Spectra and Characteristic Frequencies of Inorganic Ions
Miller, F. A., & Wilkins, C. H. (1952) · Analytical Chemistry · doi:10.1021/ac60068a007 · Cited by 1,691
Structure of Calcium Silicate Hydrate (C‐S‐H): Near‐, Mid‐, and Far‐Infrared Spectroscopy
Yu, P., Kirkpatrick, R. J., Poe, B., McMillan, P. F., & Cong, X. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb01826.x · Cited by 1,640
Garcia-Lodeiro, I., Palomo, A., Fernández-Jiménez, A., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.006 · Cited by 1,366
Composition and microstructure of alkali activated fly ash binder: Effect of the activator
Fernández-Jiménez, A., & Palomo, A. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2005.03.003 · Cited by 1,144
Barbosa, V. F. F., MacKenzie, K. J. D., & Thaumaturgo, C. (2000) · International Journal of Inorganic Materials · doi:10.1016/s1466-6049(00)00041-6 · Cited by 1,128
Resistance of geopolymer materials to acid attack
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.005 · Cited by 1,109
Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer
Rovnaník, P. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.12.023 · Cited by 1,020
Geopolymers and other alkali activated materials: why, how, and what?
Provis, J. L. (2014) · Materials and Structures · doi:10.1617/s11527-013-0211-5 · Cited by 986
Solubility and structure of calcium silicate hydrate
Chen, J. J., Thomas, J. J., Taylor, H. F. W., & Jennings, H. M. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.04.034 · Cited by 931
Effect of alkalis on fresh C–S–H gels. FTIR analysis
García Lodeiro, I., Macphee, D. E., Palomo, A., & Fernández-Jiménez, A. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.01.003 · Cited by 827
Durability of geopolymer materials in sodium and magnesium sulfate solutions
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.09.002 · Cited by 783
Water in silicate glasses: An infrared spectroscopic study
Stolper, E. (1982) · Contributions to Mineralogy and Petrology · doi:10.1007/bf00371154 · Cited by 782
Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers
Panias, D., Giannopoulou, I. P., & Perraki, T. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.12.064 · Cited by 726
FTIR study of the sol–gel synthesis of cementitious gels: C–S–H and N–A–S–H
García-Lodeiro, I., Fernández-Jiménez, A., Blanco, M. T., & Palomo, A. (2008) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-007-1643-6 · Cited by 642
Diffuse reflectance measurements by infrared Fourier transform spectrometry
Fuller, M. P., & Griffiths, P. R. (1978) · Analytical Chemistry · doi:10.1021/ac50035a045 · Cited by 622
(Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement
Lecomte, I., Henrist, C., Liégeois, M., Maseri, F., Rulmont, A., & Cloots, R. (2006) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.12.021 · Cited by 597
Resistance of alkali-activated slag concrete to acid attack
Bakharev, T., Sanjayan, J. G., & Cheng, Y.-B. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00125-x · Cited by 586
CRIADO, M., PALOMO, A., & FERNANDEZJIMENEZ, A. (2005) · Fuel · doi:10.1016/j.fuel.2005.03.030 · Cited by 575
Infrared thermography (IRT) applications for building diagnostics: A review
Kylili, A., Fokaides, P. A., Christou, P., & Kalogirou, S. A. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.005 · Cited by 526
The speciation of water in silicate melts
Stolper, E. M. (1982) · Geochimica et Cosmochimica Acta · doi:10.1016/0016-7037(82)90381-7 · Cited by 521
An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash
Criado, M., Fernández-Jiménez, A., de la Torre, A. G., Aranda, M. A. G., & Palomo, A. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.01.013 · Cited by 503
Sulfuric acid resistance of blended ash geopolymer concrete
Ariffin, M. A. M., Bhutta, M. A. R., Hussin, M. W., Mohd Tahir, M., & Aziah, N. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.018 · Cited by 488
The effects of inorganic salt contamination on the strength and durability of geopolymers
Lee, W. K. W., & van Deventer, J. S. J. (2002) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(02)00239-x · Cited by 479
Bernal, S. A., de Gutierrez, R. M., Provis, J. L., & Rose, V. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.02.003 · Cited by 473
Attenuated Total Reflectance Fourier Transform Infrared Analysis of Fly Ash Geopolymer Gel Aging
Rees, C. A., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Langmuir · doi:10.1021/la700713g · Cited by 434
Microstructural changes in alkali activated fly ash/slag geopolymers with sulfate exposure
Ismail, I., Bernal, S. A., Provis, J. L., Hamdan, S., & van Deventer, J. S. J. (2013) · Materials and Structures · doi:10.1617/s11527-012-9906-2 · Cited by 417
The characterisation of source materials in fly ash-based geopolymers
van Jaarsveld, J. G. S., van Deventer, J. S. J., & Lukey, G. C. (2003) · Materials Letters · doi:10.1016/s0167-577x(02)00971-0 · Cited by 416
Lee, W. K. W., & van Deventer, J. S. J. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00724-4 · Cited by 382
Effect on fresh C-S-H gels of the simultaneous addition of alkali and aluminium
García Lodeiro, I., Fernández-Jimenez, A., Palomo, A., & Macphee, D. E. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.08.004 · Cited by 321
Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers
Jang, J. G., Lee, N. K., & Lee, H. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.048 · Cited by 318
Resistance of alkali-activated slag concrete to carbonation
Bakharev, T., Sanjayan, J. G., & Cheng, Y.-B. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00574-9 · Cited by 315
Effect of Alumina Release Rate on the Mechanism of Geopolymer Gel Formation
Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J. (2010) · Chemistry of Materials · doi:10.1021/cm101151n · Cited by 314
Infrared Absorption Spectra of Minerals and Other Inorganic Compounds
Hunt, J. M., Wisherd, M. P., & Bonham, L. C. (1950) · Analytical Chemistry · doi:10.1021/ac60048a006 · Cited by 309
Effect of Calcium Additions on N–A–S–H Cementitious Gels
García‐Lodeiro, I., Fernández‐Jiménez, A., Palomo, A., & Macphee, D. E. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.03668.x · Cited by 304
Beasley, M. M., Bartelink, E. J., Taylor, L., & Miller, R. M. (2014) · Journal of Archaeological Science · doi:10.1016/j.jas.2014.03.008 · Cited by 228
Solid state 27Al NMR and FTIR study of lanthanum aluminosilicate glasses
Clayden, N. J., Esposito, S., Aronne, A., & Pernice, P. (1999) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(99)00555-4 · Cited by 221
Fadlelmoula, A., Pinho, D., Carvalho, V. H., Catarino, S. O., & Minas, G. (2022) · Micromachines · doi:10.3390/mi13020187 · Cited by 218
Infrared Spectra of a Water‐Containing Glass
BARTHOLOMEW, R. F., BUTLER, B. L., Hoover, H. L., & Wu, C. K. (1980) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1980.tb10748.x · Cited by 209
The effect of metal contaminants on the formation and properties of waste-based geopolymers
Jaarsveld, J. G. S. V., & van Deventer, J. S. J. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00032-0 · Cited by 193
Microstructural and Mechanical Properties of Alkali Activated Colombian Raw Materials
Criado, M., Aperador, W., & Sobrados, I. (2016) · Materials · doi:10.3390/ma9030158 · Cited by 176
Magnesium sulfate resistance of geopolymer mortar
Elyamany, H. E., Abd Elmoaty, A. E. M., & Elshaboury, A. M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.212 · Cited by 172
Gougazeh, M., & Buhl, J.-C. (2014) · Journal of the Association of Arab Universities for Basic and Applied Sciences · doi:10.1016/j.jaubas.2013.03.007 · Cited by 168
MOLLAH, M., KESMEZ, M., & COCKE, D. (2004) · Science of The Total Environment · doi:10.1016/j.scitotenv.2003.09.012 · Cited by 167
Adding synchrotron radiation to infrared microspectroscopy: what's new in biomedical applications?
Dumas, P., Sockalingum, G. D., & Sulé‐Suso, J. (2006) · Trends in biotechnology · doi:10.1016/j.tibtech.2006.11.002 · Cited by 158
Alkali activated fly ash binders. A comparative study between sodium and potassium activators
Fernández‐Jiménez, A., Palomo, A., & Criado, M. (2006) · Materiales de Construcción · doi:10.3989/mc.2006.v56.i281.92 · Cited by 154
Infrared and Raman spectral studies in cement and concrete (review)
Ghosh, S., & Handoo, S. K. (1980) · Cement and Concrete Research · doi:10.1016/0008-8846(80)90005-8 · Cited by 153
Sulfate resistance of ferrochrome slag based geopolymer concrete
Karakoç, M. B., Türkmen, İ., Maraş, M. M., Kantarcı, F., & Demirboğa, R. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.09.058 · Cited by 138
Karakassides, M. A., Gournis, D., & Petridis, D. (1999) · Clay Minerals · doi:10.1180/claymin.1999.034.3.04 · Cited by 135
Uses of Raman Spectroscopy in Cement Chemistry
Bensted, J. (1976) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1976.tb09451.x · Cited by 131
Properties and durability of alkali-activated slag pastes immersed in sea water
El-Didamony, H., Amer, A. A., & Abd-El-Aziz, H. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.01.024 · Cited by 121
Preparation of analcime from local kaolin and rice husk ash
Atta, A. Y., Jibril, B. Y., Aderemi, B. O., & Adefila, S. S. (2012) · Applied Clay Science · doi:10.1016/j.clay.2012.02.018 · Cited by 119
Nedeljković, M., Šavija, B., Zuo, Y., Luković, M., & Ye, G. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.005 · Cited by 119
Alkaline cement mortars. Chemical resistance to sulfate and seawater attack
Puertas, F., de Gutiérrez, R. M., Fernández‐Jiménez, A., Silvio Delvasto, A., & Maldonado, J. (2002) · Materiales de Construcción · doi:10.3989/mc.2002.v52.i267.326 · Cited by 113
A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation
Mylläri, V., Ruoko, T., & Syrjälä, S. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42246 · Cited by 112
Kiefer, J., Stärk, A., Kiefer, A., & Glade, H. (2018) · Energies · doi:10.3390/en11040798 · Cited by 105
Infrared Spectra of Adsorbed Molecules
Michael, R. B. (1968) · Applied Spectroscopy Reviews · doi:10.1080/05704926808547587 · Cited by 88
Infrared Intensities And Molecular Structure
Brown, T. L. (1958) · Chemical Reviews · doi:10.1021/cr50021a005 · Cited by 79
Bekiaris, G., Bruun, S., Peltre, C., Houot, S., & Jensen, L. S. (2015) · Waste Management · doi:10.1016/j.wasman.2015.02.029 · Cited by 78
The use of infrared spectra for the determination of minerals
Povarennykh, A. S. (1978) · American Mineralogist · Cited by 73
Geopolymer Concrete: A Review of Development and Opportunities
Lloyd, N. A., & Rangan, B. V. (2010) · eSpace (Curtin University) · Cited by 65
Performance of slag blended alkaline activated palm oil fuel ash mortar in sulfate environments
Yusuf, M. O. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.07.012 · Cited by 56
Self-citationA new approach to removing interference of moisture from FTIR spectrum
Zhang, X., He, A., Guo, R., Zhao, Y., Yang, L., Morita, S., Xu, Y., Noda, I., & Ozaki, Y. (2021) · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2021.120373 · Cited by 55
Infrared spectra of some rock forming minerals
Keller, W. D., Spotts, J. H., & Biggs, D. L. (1952) · American Journal of Science · doi:10.2475/ajs.250.6.453 · Cited by 46
Application of Ca-based geopolymer with blast furnace slag, a review
Davidovits, J. (2011) · Cited by 41
Enhancing the sensitivity of nano-FTIR spectroscopy
Hermann, P. Z., Kästner, B., Hoehl, A., Kashcheyevs, V., Patoka, P., Ulrich, G., Feikes, J., Ries, M., Tydecks, T., Beckhoff, B., et al. (2017) · Optics Express · doi:10.1364/oe.25.016574 · Cited by 32
Infrared Analysis of Clays and Related Minerals
Nahin, P. G. (1955) · Clays and clay technology (National Conference on Clays and Clay Technology) · doi:10.1346/ccmn.1952.0010115 · Cited by 16
Cited by
Performance of geopolymer composites reinforced with treated date palm and polypropylene fibers
Briki, L., Kessal, O., Belkadi, A. A., Alsuhaibani, E., Douadi, A., & Bamaga, S. O. (2026) · Scientific Reports · doi:10.1038/s41598-026-50457-7 · Cited by 2
Metadata
- Authors
- Yusuf, M. O.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2023-03-06
- Volume
- 13
- Issue
- 5
- Pages
- 3353
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W4323365469
- Cited by
- 439
- References
- 68
- FWCI
- 51.62
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.