The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Microstructural and Mechanical Properties of Alkali Activated Colombian Raw Materials
Open accessAbstract
Microstructural and mechanical properties of alkali activated binders based on blends of Colombian granulated blast furnace slag (GBFS) and fly ash (FA) were investigated. The synthesis of alkali activated binders was conducted at 85 °C for 24 h with different slag/fly ash ratios (100:0, 80:20, 60:40, 40:60, 20:80, and 0:100). Mineralogical and microstructural characterization was carried out by means of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX) and Nuclear magnetic resonance (NMR). Mechanical properties were evaluated through the compressive strength, modulus of elasticity and Poisson’s ratio. The results show that two different reaction products were detected in the slag/fly ash mixtures, a calcium silicate hydrate with Al in its structure (C-A-S-H gel) and a sodium aluminosilicate hydrate (N-A-S-H gel) with higher number of polymerized species and low content in Ca. It was found that with the increase of the amount of added slag, the amount of C-A-S-H gel increased and the amount of N-A-S-H gel decreased. The matrix was more dense and compact with almost absence of pores. The predominance of slag affected positively the compressive strength, Young’s modulus and Poisson’s ratio, with 80% slag and 20% fly ash concrete being the best mechanical performance blend.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019
Puertas, F., Fernández-Jiménez, A., & Blanco-Varela, M. T. (2004) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00254-0 · Cited by 409
Cited by
Mechanical properties of alkali-activated concrete: A state-of-the-art review
Ding, Y., Dai, J.-G., & Shi, C.-J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.121 · Cited by 448
Bond Characterization in Cementitious Material Binders Using Fourier-Transform Infrared Spectroscopy
Yusuf, M. O. (2023) · Applied Sciences · doi:10.3390/app13053353 · Cited by 439
Revealing the Influence of Microparticles on Geopolymers’ Synthesis and Porosity
Burduhos Nergis, D. D., Vizureanu, P., Ardelean, I., Sandu, A. V., Corbu, O. C., & Matei, E. (2020) · Materials · doi:10.3390/ma13143211 · Cited by 51
The Characterization of Steel Slag by Alkali Activation
Aziz, I. H., Zulkifly, K., Sakkas, K., Panias, D., Tsaousi, G. M., Bakri, M. M. A. A., & Yong, H. C. (2017) · OALib · doi:10.4236/oalib.1103816 · Cited by 14
Metadata
- Authors
- Criado, M., Aperador, W., & Sobrados, I.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2016-03-05
- Volume
- 9
- Issue
- 3
- Pages
- 158
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2292501166
- Cited by
- 176
- References
- 2
- FWCI
- 15.40
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microstructural and Mechanical Properties of Alkali Activated Colombian Raw Materials. https://app.cochat.ai/papers/10.3390/ma9030158
- The paper
- Criado, M., Aperador, W., & Sobrados, I. (2016). Microstructural and Mechanical Properties of Alkali Activated Colombian Raw Materials. Materials. https://doi.org/10.3390/ma9030158
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.