CoChat

Mathematical Modeling of Battery Degradation Based on Direct Measurements and Signal Processing Methods

Open access
de la Vega, Joaquín, Riba, Jordi-Roger, Ortega-Redondo, Juan Antonio · 2023 · Applied Sciences

The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.

Abstract

This paper proposes and evaluates the behavior of a new health indicator to estimate the capacity fade of lithium-ion batteries and their state of health (SOH). This health indicator is advantageous because it does not require the acquisition of data from full charge–discharge cycles, since it is calculated within a narrow SOC interval where the voltage vs. SOC relationship is very linear and that is within the usual transit range for most practical charge and discharge cycles. As a result, only a small fraction of the data points of a full charge–discharge cycle are required, reducing storage and computational resources while providing accurate results. Finally, by using the battery model defined by the Nernst equation, the behavior of future charge–discharge cycles can be accurately predicted, as shown by the results presented in this paper. The proposed approach requires the application of appropriate signal processing techniques, from discrete wavelet filtering to prediction methods based on linear fitting and autoregressive integrated moving average algorithms.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/app13084938

Cites

43 of 43 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Instantaneous terminal cell voltage [V] vs. SOC [p.u.] during the first discharge cycle (reference cycle) and the n -th cycle. Calculation of the Δ VRMS indicator between the first discharge cycle and the n -th (generic) cycle. Figure 1. Instantaneous terminal cell voltage [V] vs. SOC [p.u.] during the first discharge cycle (reference cycle) and the n -th cycle. Calculation of the D VRMS indicator between the first discharge cycle and the n -th (generic) cycle.
Figure 1 Instantaneous terminal cell voltage [V] vs. SOC [p.u.] during the first discharge cycle (reference cycle) and the n -th cycle. Calculation of the Δ VRMS indicator between the first discharge cycle and the n -th (generic) cycle. Figure 1. Instantaneous terminal cell voltage [V] vs. SOC [p.u.] during the first discharge cycle (reference cycle) and the n -th cycle. Calculation of the D VRMS indicator between the first discharge cycle and the n -th (generic) cycle.CC-BY · From the PDF
Image 2
CC-BY · From the PDF
Figure 3 Forecasting algorithm based on historical data-the training data. Figure 3. Forecasting algorithm based on historical data-the training data.
Figure 3 Forecasting algorithm based on historical data-the training data. Figure 3. Forecasting algorithm based on historical data-the training data.CC-BY · From the PDF
Image 4
CC-BY · From the PDF
Figure 5 DWT filter applied to the computed values of Δ VRMS . The figure shows the original signal, its approximation or filtered signal, and the three details removed from the original signal, corresponding to successive high-pass filters. Figure 5. DWT filter applied to the computed values of D VRMS . The figure shows the original signal, its approximation or filtered signal, and the three details removed from the original signal, corresponding to successive high-pass filters.
Figure 5 DWT filter applied to the computed values of Δ VRMS . The figure shows the original signal, its approximation or filtered signal, and the three details removed from the original signal, corresponding to successive high-pass filters. Figure 5. DWT filter applied to the computed values of D VRMS . The figure shows the original signal, its approximation or filtered signal, and the three details removed from the original signal, corresponding to successive high-pass filters.CC-BY · From the PDF
Image 6
CC-BY · From the PDF
Image 7
CC-BY · From the PDF
Image 8
CC-BY · From the PDF
Image 9
CC-BY · From the PDF
Image 10
CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 43 references

Research works printed but not linked: 1

  1. Baccouche, 2018, Ben Implementation of an improved Coulomb-counting algorithm based on a piecewise SOC-OCV relationship for SOC estimation of Li-ion battery, Int. J. Renew. Energy Res., 8, 178

Cited by

See all 21

Metadata

Authors
de la Vega, J., Riba, J.-R., & Ortega-Redondo, J. A.
Affiliations
  • Electronics Engineering Department, Universitat Politècnica de Catalunya, 08034 Barcelona, Spain
  • Universitat Politècnica de Catalunya (ES)
Corresponding author
Riba, Jordi-Roger
Venue
Applied Sciences
Publisher
MDPI AG
Published
2023-04-14
Volume
13
Issue
8
Pages
4938
ISSN
2076-3417 (ISSN-L)
OpenAlex
W4365517166
Cited by
12
References
43
Citations by year
2026: 3 · 2025: 6 · 2024: 2 · 2023: 1
FWCI
0.87
Type
journal article
Language
en
Open access
Locations
  • Applied Sciences (publishedVersion, cc-by)
  • UPCommons institutional repository (Universitat Politècnica de Catalunya) (submittedVersion, cc-by-nc-nd)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • TECNALIA Publications (Fundación TECNALIA Research & Innovation) (submittedVersion, public-domain)
Funders
  • Ministerio de Ciencia e Innovación de España (TED2021-130007B-I00, 2021 SGR 00392)
  • the Generalitat de Catalunya (TED2021-130007B-I00, 2021 SGR 00392)
Topics
  • Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
  • Physical Sciences › Engineering › Civil and Structural Engineering › Structural Health Monitoring Techniques
Keywords
lithium-ion battery degradation, battery health indicators, state of health estimation, capacity fade, ARIMA forecasting, linear fitting

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Mathematical Modeling of Battery Degradation Based on Direct Measurements and Signal Processing Methods. https://app.cochat.ai/papers/10.3390/app13084938
The paper
de la Vega, J., Riba, J.-R., & Ortega-Redondo, J. A. (2023). Mathematical Modeling of Battery Degradation Based on Direct Measurements and Signal Processing Methods. Applied Sciences. https://doi.org/10.3390/app13084938

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.