CoChat

Biocompound and Lake Pigment Extraction from Invasive Alien Plant Biomass for Sustainable Ink Applications

Open access

The DOI matches its Crossref record; 31 of the 43 references it cites were found in a registry or an index, and 3 are not checked yet; 18 of the 72 sources its claims cite were checked for support.

Abstract

The management of invasive alien species (IAS) generates large amounts of plant waste biomass that is commonly disposed of by burning or destruction, leading to environmental and economic drawbacks. At the same time, the production of synthetic dyes and pigments used in printing and graphic applications remains a significant source of pollution. In this context, the valorization of IAS biomass as a source of natural colorants represents a sustainable alternative aligned with circular economy principles. Here, biocompounds and natural dyes were extracted from four invasive or non-native plant species—Arundo donax, Phytolacca americana, Tradescantia fluminensis, and Eucalyptus globulus—using five solid–liquid extraction methods: infusion, infusion with heat, thermal agitation, Soxhlet extraction, and ultrasonic-assisted extraction. Extraction efficiency and color preservation were comparatively evaluated. Although Soxhlet extraction provided the highest extraction yield (up to 30.5%), infusion with heat proved to be the most suitable method for preserving color integrity and minimizing oxidation. Liquid dyes obtained by the selected extraction method were converted into solid pigments through a lake pigment precipitation process using aluminum potassium sulfate and sodium bicarbonate. The resulting pigments were characterized in terms of chemical composition, particle size, and chromatic properties, and subsequently formulated into oil-based inks using linseed oil as binder. Scanning electron microscopy revealed pigment particle sizes ranging from approximately 2.1 to 8.3 µm, depending on the plant source, and confirmed adequate ink penetration and distribution on commercial printmaking paper. The obtained pigments exhibited color tones ranging from yellow to brown and grey, mainly associated with the phenolic and tannin content of the original biomass. Printing tests demonstrated the suitability of the developed inks for manual printmaking techniques, highlighting the potential of IAS-derived pigments as sustainable alternatives for artistic and printing applications.

Verified 2026-11-19 · 3 references not checked yet

Overview

CoChat Summary

TL;DR

This study tested five aqueous solid–liquid extraction methods on invasive/non-native plant biomass from four species and converted the resulting dyes into aluminum-based lake pigments for oil-based printing inks. Infusion with heat best preserved color, while Soxhlet gave the highest yield but caused darker/oxidized extracts.

Key findings

  • Soxhlet extraction consistently gave the highest extraction yields, reaching up to 30.5%, but extracts often showed darker tones and signs of oxidation or color degradation; infusion with heat gave more homogeneous coloration and better visual stability.
  • Pigments from *Phytolacca americana* and *Arundo donax* showed higher coloring capacity, producing intense bright yellow hues; *Eucalyptus globulus* produced darker brown pigments linked to high tannin content, while *Tradescantia fluminensis* yielded lighter, softer brown tones with lower pigment strength.
  • SEM-EDS of formulated inks identified carbon and oxygen as predominant elements, aluminum as a major component from lake pigment formation, and minor potassium, sodium, sulfur, calcium, and silicon depending on botanical source.
  • Particle sizes varied by source: Table 5 reports medium values of 3.901 µm for *Arundo donax*, 2.100 µm for *Eucalyptus globulus*, 8.347 µm for *Phytolacca americana*, and 4.242 µm for *Tradescantia fluminensis*; the abstract summarizes pigment particle sizes as approximately 2.1 to 8.3 µm.

Methods

  • Biomass was collected from a riparian forest along the Umia River (Galicia, northwestern Spain) within a 2 km stretch, between May and November 2023. Species were *Arundo donax*, *Phytolacca americana*, *Tradescantia fluminensis*, and *Eucalyptus globulus*; stems and leaves were used for herbaceous species, bark and leaves for *Eucalyptus globulus*, and fruits were excluded.
  • Five solid–liquid extraction methods were compared using 20 g dried plant material and 250 mL distilled water: infusion (48 h, 20–22 °C), infusion with heat (1 h, 100 °C), thermal agitation (8 h, 40 °C), Soxhlet (2.5 h, 100 °C), and ultrasonic-assisted extraction (40 min, 70 °C). Dyes were converted to lake pigments using aluminum potassium sulfate and sodium bicarbonate; selected condition test 5 used 100 mL dye extract, 200 mL distilled water, 10 g alum, and 5 g sodium bicarbonate. Inks were formulated with 3.0 g dry pigment and 1.5 g linseed oil.
  • Characterization included SEM and optical stereomicroscopy, flatbed scanning, SEM-EDS elemental analysis, Folin-Ciocalteu total phenolics, acid hydrolysis in butanol for anthocyanins, and particle size measurement from SEM images. Experiments were performed in triplicate, reported as arithmetic means, with no advanced statistical tests.

Limitations

  • The paper states that no advanced statistical tests were applied because the study is comparative and exploratory; all experiments were triplicate means. It also states that manual grinding did not achieve industrial milling standards, particle sizes remained above industrial standards, and mechanical milling would be needed for improved uniformity.
  • The paper states that no spectrophotometric equipment was available, so CIE-Lab and RGB values were estimated by visual comparison against a reference chart and should not be interpreted as precise quantitative colorimetry. It also states that pH was not continuously monitored during lake pigment precipitation, reaction kinetics were not systematically evaluated, and long-term durability/lightfastness were not experimentally assessed.
  • The paper states that quantitative rheological characterization, adhesion testing, opacity measurements, abrasion resistance, and penetration depth quantification were not performed; industrial scalability was outside the scope; and chemical residues from lake pigment formation require further study. Evident from the text, the extraction-method comparison for selecting the most suitable method was performed using only *Eucalyptus* bark as biomass, which limits generalization of method ranking across all species.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/app16062635

Cites

31 of 43 references verified0 citation errors · 9 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Scheme of lake pigment process, from dye extraction to chemical reaction of Al 3 + ( Alum ) and NAHCO3 ( Sodium bicarbonate ), precipitation and drying process.
Figure 1 Scheme of lake pigment process, from dye extraction to chemical reaction of Al 3 + ( Alum ) and NAHCO3 ( Sodium bicarbonate ), precipitation and drying process.CC-BY · From the PDF
Figure 2 Decantation and filtering process after lake pigment reaction of Tradescantia fluminensis matter.
Figure 2 Decantation and filtering process after lake pigment reaction of Tradescantia fluminensis matter.CC-BY · From the PDF
Figure 3 Variation in extraction yields for solid-liquid extraction methods in means of efficiency, using Eucalyptus globulus bark as biomass for testing.
Figure 3 Variation in extraction yields for solid-liquid extraction methods in means of efficiency, using Eucalyptus globulus bark as biomass for testing.CC-BY · From the PDF
Figure 4 Dry pigment from Arundo donax after 72 h.
Figure 4 Dry pigment from Arundo donax after 72 h.CC-BY · From the PDF
Figure 5 Augmented image of dry pigment from Arundo donax , observed under the Optical microscope Nikon SZM 1500.
Figure 5 Augmented image of dry pigment from Arundo donax , observed under the Optical microscope Nikon SZM 1500.CC-BY · From the PDF
Figure 6 Wet pigment from Tradescantia fluminensis after 24 h.
Figure 6 Wet pigment from Tradescantia fluminensis after 24 h.CC-BY · From the PDF
Figure 7 Augmented image of dry pigment from Tradescantia fluminensis , observed under the Optical microscope Nikon SZM 1500.
Figure 7 Augmented image of dry pigment from Tradescantia fluminensis , observed under the Optical microscope Nikon SZM 1500.CC-BY · From the PDF
Figure 8 Wet pigment from Phytolacca americana after 24 h.
Figure 8 Wet pigment from Phytolacca americana after 24 h.CC-BY · From the PDF
Figure 9 Augmented image of dry pigment from Phytolacca americana , observed under the Optical microscope Nikon SZM 1500.
Figure 9 Augmented image of dry pigment from Phytolacca americana , observed under the Optical microscope Nikon SZM 1500.CC-BY · From the PDF
Figure 10 Augmented image of dry pigment from Eucalyptus globulus , observed under the Optical microscope Nikon SZM 1500.
Figure 10 Augmented image of dry pigment from Eucalyptus globulus , observed under the Optical microscope Nikon SZM 1500.CC-BY · From the PDF
Figure 11 Wet pigment from Eucalyptus globulus after decantation.
Figure 11 Wet pigment from Eucalyptus globulus after decantation.CC-BY · From the PDF
Image 12
CC-BY · From the PDF
Image 13
CC-BY · From the PDF
Figure 12 Hand-crafted greasy inks applied on paper. From left to right: Phytolacca americana , Arundo donax , Eucalyptus globulus bark and leaves, Tradescantia fluminensis . The golden color is given by the linseed oil in combination with extracted color hues.
Figure 12 Hand-crafted greasy inks applied on paper. From left to right: Phytolacca americana , Arundo donax , Eucalyptus globulus bark and leaves, Tradescantia fluminensis . The golden color is given by the linseed oil in combination with extracted color hues.CC-BY · From the PDF
Figure 13 Augmented image × 250 from electron microscope JEOL 6100 of commercial printing paper Hannehmüller 300 g internal structure, with particles of commercial ink ( left ) and Arundo donax ink ( right ) applied by etching techniques.
Figure 13 Augmented image × 250 from electron microscope JEOL 6100 of commercial printing paper Hannehmüller 300 g internal structure, with particles of commercial ink ( left ) and Arundo donax ink ( right ) applied by etching techniques.CC-BY · From the PDF
Figure 14 SEM visualization of chemical composition of ink from Arundo donax . Main composition was carbon, oxygen and aluminum with potassium, sodium and sulfur in lower quantities. Every color presents the area of the SEM image analyzed and its major components.
Figure 14 SEM visualization of chemical composition of ink from Arundo donax . Main composition was carbon, oxygen and aluminum with potassium, sodium and sulfur in lower quantities. Every color presents the area of the SEM image analyzed and its major components.CC-BY · From the PDF
Image 17
CC-BY · From the PDF
Figure 16 Chemical composition of Tradescantia fluminensis 's ink. Main composition was carbon, oxygen and aluminum with potassium, sodium and sulfur in lower quantities. Every color presents the area of the SEM image analyzed and its major components.
Figure 16 Chemical composition of Tradescantia fluminensis 's ink. Main composition was carbon, oxygen and aluminum with potassium, sodium and sulfur in lower quantities. Every color presents the area of the SEM image analyzed and its major components.CC-BY · From the PDF
Figure 17 Spectrum of chemical composition of ink extracted from Phytolacca americana , demonstrating higher contents of carbon and oxygen, followed by aluminum, calcium, potassium and sulfur.
Figure 17 Spectrum of chemical composition of ink extracted from Phytolacca americana , demonstrating higher contents of carbon and oxygen, followed by aluminum, calcium, potassium and sulfur.CC-BY · From the PDF
Figure 18 Principal carbon and oxygen contents present in elaborated inks from selected plant species.
Figure 18 Principal carbon and oxygen contents present in elaborated inks from selected plant species.CC-BY · From the PDF
Figure 19 Secondary chemical contents present in elaborated inks from selected invasive alien species. Major quantities of calcium, silicium, aluminum, sodium and sulfur.
Figure 19 Secondary chemical contents present in elaborated inks from selected invasive alien species. Major quantities of calcium, silicium, aluminum, sodium and sulfur.CC-BY · From the PDF

Verification

Claims the paper makes

13 Valid · 2 Not valid · 27 Not checked · 92 Own results and interpretations

69 more claims

Create a free account to see all 134 claims and to verify the 7 references still open.

See all claims — free account
  • It may state two separate claims as one. 36
  • Probably not a substantial claim. 31
  • Borderline: one of the tests for a substantial claim is unclear. 1

Create a free account to see these claims.

Citations

Cites

Metadata

Authors
Iglesias, A., Cancela, Á., Heyvaert, A., & Sánchez, Á.
Affiliations
Universidade de Vigo (ES)
Corresponding author
Iglesias, Antía
Venue
Applied Sciences
Publisher
MDPI AG
Published
2026-03-10
Volume
16
Issue
6
Pages
2635
ISSN
2076-3417 (ISSN-L)
OpenAlex
W7134854928
Cited by
0
References
42
FWCI
0.00
Type
journal article
Language
en
Open access
Locations
  • Applied Sciences (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
Xunta de Galicia Predoctoral Grants (290)
Topics
  • Physical Sciences › Materials Science › Polymers and Plastics › Dyeing and Modifying Textile Fibers
  • Life Sciences › Agricultural and Biological Sciences › Food Science › Botanical Research and Applications
  • Physical Sciences › Chemistry › Inorganic Chemistry › Pigment Synthesis and Properties
Keywords
invasive species, plant biomass valorization, natural dyes, lake pigments, ink formulation, solid-liquid extraction, ultrasound-assisted extraction, Soxhlet extraction, Arundo donax, Phytolacca americana, Tradescantia fluminensis, Eucalyptus globulus, phenolic compounds, tannins, pigment particle size, printmaking, circular economy, synthetic dye alternatives

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.