End-To-End Convolutional Neural Network Model for Gear Fault Diagnosis Based on Sound Signals
Open accessThe DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Abstract
Currently gear fault diagnosis is mainly based on vibration signals with a few studies on acoustic signal analysis. However, vibration signal acquisition is limited by its contact measuring while traditional acoustic-based gear fault diagnosis relies heavily on prior knowledge of signal processing techniques and diagnostic expertise. In this paper, a novel deep learning-based gear fault diagnosis method is proposed based on sound signal analysis. By establishing an end-to-end convolutional neural network (CNN), the time and frequency domain signals can be fed into the model as raw signals without feature engineering. Moreover, multi-channel information from different microphones can also be fused by CNN channels without using an extra fusion algorithm. Our experiment results show that our method achieved much better performance on gear fault diagnosis compared with other traditional gear fault diagnosis methods involving feature engineering. A publicly available sound signal dataset for gear fault diagnosis is also released and can be downloaded as instructed in the conclusion section.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Reducing the dimensionality of data with neural networks
Hinton, G. E., & Salakhutdinov, R. R. (2006) · Science · doi:10.1126/science.1127647 · Cited by 20,928
Environmental sound classification with convolutional neural networks
Piczak, K. J. (2015) · 2015 IEEE 25th International Workshop on Machine Learning for Signal Processing (MLSP) · doi:10.1109/mlsp.2015.7324337 · Cited by 931 · cited 1×
“At present, deep learning models have been widely applied in speech recognition [25,26], acoustic scene classification [27,28], and environmental sound classification [29,30].”
MethodVery deep convolutional neural networks for raw waveforms
Dai, W., Dai, C., Qu, S., Li, J., & Das, S. (2017) · 2017 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) · doi:10.1109/icassp.2017.7952190 · Cited by 357 · cited 1×
“At present, deep learning models have been widely applied in speech recognition [25,26], acoustic scene classification [27,28], and environmental sound classification [29,30].”
Sawalhi, N., & Randall, R. B. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.09.009 · Cited by 283
Speech acoustic modeling from raw multichannel waveforms
Hoshen, Y., Weiss, R. J., & Wilson, K. W. (2015) · 2015 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) · doi:10.1109/icassp.2015.7178847 · Cited by 226 · cited 3×
“At present, deep learning models have been widely applied in speech recognition [25,26], acoustic scene classification [27,28], and environmental sound classification [29,30].”
Borghesani, P., Pennacchi, P., Randall, R. B., Sawalhi, N., & Ricci, R. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.11.001 · Cited by 221
Li, S., Liu, G., Tang, X., Lu, J., & Hu, J. (2017) · Sensors · doi:10.3390/s17081729 · Cited by 211 · cited 1×
“Many researchers also applied deep learning models in vibration signal analysis to detect fault modes [1,2,4,31].”
BackgroundSelf-citationLearning environmental sounds with end-to-end convolutional neural network
Tokozume, Y., & Harada, T. (2017) · 2017 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) · doi:10.1109/icassp.2017.7952651 · Cited by 207 · cited 1×
“At present, deep learning models have been widely applied in speech recognition [25,26], acoustic scene classification [27,28], and environmental sound classification [29,30].”
Acoustic based fault diagnosis of three-phase induction motor
Glowacz, A. (2018) · Applied Acoustics · doi:10.1016/j.apacoust.2018.03.010 · Cited by 189
Planetary Gears Feature Extraction and Fault Diagnosis Method Based on VMD and CNN
Liu, C., Cheng, G., Chen, X., & Pang, Y. (2018) · Sensors · doi:10.3390/s18051523 · Cited by 109
A convolutional neural network approach for acoustic scene classification
Valenti, M., Squartini, S., Diment, A., Parascandolo, G., & Virtanen, T. I. (2017) · International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn.2017.7966035 · Cited by 102 · cited 1×
“At present, deep learning models have been widely applied in speech recognition [25,26], acoustic scene classification [27,28], and environmental sound classification [29,30].”
MethodAngle ⧹ time cyclostationarity for the analysis of rolling element bearing vibrations
Abboud, D., Antoni, J., Eltabach, M., & Sieg-Zieba, S. (2015) · Measurement · doi:10.1016/j.measurement.2015.07.017 · Cited by 98
Research of Planetary Gear Fault Diagnosis Based on Permutation Entropy of CEEMDAN and ANFIS
Kuai, M., Cheng, G., Pang, Y., & Li, Y. (2018) · Sensors · doi:10.3390/s18030782 · Cited by 95 · cited 1×
“Kuai et al. [3] used the method of permutation entropy of Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) Adaptive Neuro-fuzzy Inference System (ANFIS) to make gear fault diagnosis in a planetary gearbox.”
MethodGuo, X., Shen, C., & Chen, L. (2016) · Applied Sciences · doi:10.3390/app7010041 · Cited by 85 · cited 1×
“Many researchers also applied deep learning models in vibration signal analysis to detect fault modes [1,2,4,31].”
BackgroundResidual Life Prediction of Rotating Machines Using Acoustic Noise Signals
Scanlon, P., Kavanagh, D. F., & Boland, F. M. (2013) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2012.2212508 · Cited by 72 · cited 1×
“Scanlon et al. [17] used non-contact microphone sensors to acquire acoustic signals of rotating machinery for predicting residual life.”
BackgroundGear parameter identification in a wind turbine gearbox using vibration signals
Sawalhı, N., & Randall, R. B. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.08.017 · Cited by 58
Han, Y., & Lee, K. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1607.02383 · Cited by 49 · cited 1×
“At present, deep learning models have been widely applied in speech recognition [25,26], acoustic scene classification [27,28], and environmental sound classification [29,30].”
MethodBearing fault diagnosis based on a new acoustic emission sensor technique
Hecke, B. V., Qu, Y., & He, D. (2014) · Proceedings of the Institution of Mechanical Engineers Part O Journal of Risk and Reliability · doi:10.1177/1748006x14558900 · Cited by 43 · cited 1×
“Hecke et al. [18] designed a new acoustic emission sensor technique to detect the fault mode of the bearing.”
MethodLi, Y., Cheng, G., Pang, Y., & Kuai, M. (2018) · Sensors · doi:10.3390/s18061735 · Cited by 42 · cited 2×
“Many researchers also applied deep learning models in vibration signal analysis to detect fault modes [1,2,4,31].”
BackgroundMethodZhang, C., Peng, Z., Chen, S., Li, Z., & Wang, J. (2016) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406216677102 · Cited by 41
Monitoring of the Noise Emitted by Machine Tools in Industrial Conditions
Jóźwik, J., Wac-Włodarczyk, A., Michałowska, J., & Kłoczko, E. M. (2017) · Journal of Ecological Engineering · doi:10.12911/22998993/79447 · Cited by 40
Application of a near-field acoustic holography-based diagnosis technique in gearbox fault diagnosis
Hou, J., Jiang, W., & Lu, W. (2011) · Journal of Vibration and Control · doi:10.1177/1077546311428634 · Cited by 32
Research of Planetary Gear Fault Diagnosis Based on Permutation Entropy of CEEMDAN and ANFISPreprint
Kuai, M., Cheng, G., Pang, Y., et al. (2018) · Preprints.org · doi:10.20944/preprints201801.0102.v1 · Cited by 32
Rezaei, A., Dadouche, A., Wickramasinghe, V. K., & Dmochowski, W. M. (2010) · Tribology Transactions · doi:10.1080/10402004.2010.533817 · Cited by 31 · cited 1×
“AIDA et al. [16] compared the advantages and disadvantages of non-contact, air-coupled ultrasonic sensors and contact piezoelectric ultrasonic sensors in health monitoring of rotating machinery.”
BackgroundDiagnosis of the wear of gears in the gearbox using the wavelet packet transform
Figlus, T., & Stańczyk, M. (2014) · Hrčak Portal of scientific journals of Croatia (University Computing Centre) · Cited by 29
A method for detecting damage to rolling bearings in toothed gears of processing lines
Figlus, T., & Stańczyk, M. (2015) · Hrčak Portal of scientific journals of Croatia (University Computing Centre) · Cited by 26
Improving Rolling Bearing Fault Diagnosis by DS Evidence Theory Based Fusion Model
Yao, X., Li, S., & Hu, J. (2017) · Journal of Sensors · doi:10.1155/2017/6737295 · Cited by 24
Self-citationDetection mechanical fault of induction motor using harmonic current and sound acoustic
Prainetr, S., Wangnippanto, S., & Tunyasirut, S. (2017) · International Electrical Engineering Congress (iEECON) · doi:10.1109/ieecon.2017.8075725 · Cited by 20 · cited 1×
“In recent years, a few studies have explored various acoustic-based fault diagnosis techniques [13–15].”
BackgroundDiagnosing Rolling Bearing Faults Using Spatial Distribution Features of Sound Field
Lu, W. (2012) · Journal of Mechanical Engineering · doi:10.3901/jme.2012.13.068 · Cited by 8 · cited 1×
“Although all these sound signal based methods can work in fault diagnosis and have the capability to detect fault modes, they rely heavily on prior knowledge of signal processing techniques and diagnostic expertise, especially for the analysis of multiple channel measurement signals [23].”
BackgroundGearbox fault diagnosis based on spatial distribution features of sound field
Lu, W. (2013) · Zhendong yu chongji · Cited by 2
Rolling Element Bearing Fault Diagnosis Based on Near-field Acoustic Holography
Zhang, Y. (2013) · Noise and Vibration Control · Cited by 1
Research works printed but not linked: 1
- Hou, 2011, The application of NAH-based fault diagnosis method based on blocking feature extraction in coherent fault conditions, J. Vib. Eng., 24, 555
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
A comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
Limited Data Rolling Bearing Fault Diagnosis With Few-Shot Learning
Zhang, A., Li, S., Cui, Y., Yang, W., Dong, R., & Hu, J. (2019) · IEEE Access · doi:10.1109/access.2019.2934233 · Cited by 419
“Deep learning methods have also been applied to fault diagnosis and obtained state-of-the-art results [6] using techniques such as auto-encoders (AE) [12]–[15], restricted boltzmann machine (RBM) [16]–[19], convolutional neural networks (CNNs) [20]–[24], recurrent neural”
MethodSelf-citationDeep learning for prognostics and health management: State of the art, challenges, and opportunities
Rezaeianjouybari, B., & Shang, Y. (2020) · Measurement · doi:10.1016/j.measurement.2020.107929 · Cited by 310
Data-driven machinery fault diagnosis: A comprehensive review
Neupane, D., Bouadjenek, M. R., Dazeley, R., & Aryal, S. (2025) · Neurocomputing · doi:10.1016/j.neucom.2025.129588 · Cited by 178
Metadata
- Authors
- Yao, Y., Wang, H., Li, S., Liu, Z., Gui, G., Dan, Y., & Hu, J.
- Affiliations
- Guizhou University (CN)
- University of South Carolina (US)
- National Institute of Measurement and Testing Technology (CN)
- Corresponding author
- Li, Shaobo
- Hu, Jianjun
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2018-09-07
- Volume
- 8
- Issue
- 9
- Pages
- 1584
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W2891044424
- Cited by
- 120
- References
- 30
- Citations by year
- 2026: 4 · 2025: 21 · 2024: 14 · 2023: 19 · 2022: 13 · 2021: 20 · 2020: 16 · 2019: 11 · 2018: 2
- FWCI
- 7.58
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Applied Sciences (publishedVersion, cc-by)
- Scholar Commons (University of South Carolina) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (91746116 and 51741101)
- Science and Technology Project of Guizhou Province (. [2017]2308, Talents [2015]4011 and [2016]5013, Collaborative Innovation [2015]02)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Computer Science › Signal Processing › Music and Audio Processing
- Keywords
- gear fault diagnosis, acoustic signal analysis, acoustic signals, end-to-end convolutional neural network, channel fusion, vibration signal acquisition
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.