The DOI matches its Crossref record; 124 of the 124 references it cites were found in a registry or an index.
A Review of the Synthesis and Applications of Polymer–Nanoclay Composites
Open accessAbstract
Recent advancements in material technologies have promoted the development of various preparation strategies and applications of novel polymer–nanoclay composites. Innovative synthesis pathways have resulted in novel polymer–nanoclay composites with improved properties, which have been successfully incorporated in diverse fields such as aerospace, automobile, construction, petroleum, biomedical and wastewater treatment. These composites are recognized as promising advanced materials due to their superior properties, such as enhanced density, strength, relatively large surface areas, high elastic modulus, flame retardancy, and thermomechanical/optoelectronic/magnetic properties. The primary focus of this review is to deliver an up-to-date overview of polymer–nanoclay composites along with their synthesis routes and applications. The discussion highlights potential future directions for this emerging field of research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Alexandre, M., & Dubois, P. (2000) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(00)00012-7 · Cited by 6,377
Polymer Layered Silicate Nanocomposites
Giannelis, E. P. (1996) · Advanced Materials · doi:10.1002/adma.19960080104 · Cited by 3,479
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
A review on polymer–layered silicate nanocomposites
Pavlidou, S., & Papaspyrides, C. D. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.008 · Cited by 2,526
A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade
Uddin, M. K. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.029 · Cited by 2,108
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Photoinitiated Polymerization: Advances, Challenges, and Opportunities
Yağcı, Y., Jockusch, S., & Turro, N. J. (2010) · Macromolecules · doi:10.1021/ma1007545 · Cited by 1,432
A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites
Mittal, G., Dhand, V., Rhee, K. Y., Park, S.-J., & Lee, W. R. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.03.022 · Cited by 1,371
Light-Controlled Radical Polymerization: Mechanisms, Methods, and Applications
Chen, M., Zhong, M., & Johnson, J. A. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00671 · Cited by 1,202
Permeability of polymer/clay nanocomposites: A review
Choudalakis, G., & Gotsis, A. D. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.01.027 · Cited by 1,075
Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocomposites
Dennis, H. R., Hunter, D. L., Chang, D., Kim, S., White, J. L., Cho, J. W., & Paul, D. R. (2001) · Polymer · doi:10.1016/s0032-3861(01)00473-6 · Cited by 966
Recent advance in research on halloysite nanotubes-polymer nanocomposite
Liu, M., Jia, Z., Jia, D., & Zhou, C. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.04.004 · Cited by 926
Photoinduced Electron Transfer Reactions for Macromolecular Syntheses
Dadashi-Silab, S., Doran, S., & Yagci, Y. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00586 · Cited by 846
A versatile MOF-based trap for heavy metal ion capture and dispersion
Peng, Y., Huang, H., Zhang, Y., Kang, C., Chen, S., Song, L., Liu, D., & Zhong, C. (2018) · Nature Communications · doi:10.1038/s41467-017-02600-2 · Cited by 804
Müller, K., Bugnicourt, E., Latorre, M., Jorda, M., Echegoyen Sanz, Y., Lagaron, J., Miesbauer, O., Bianchin, A., Hankin, S., Bölz, U., et al. (2017) · Nanomaterials · doi:10.3390/nano7040074 · Cited by 746
Self-healing polymer nanocomposite materials: A review
Thakur, V. K., & Kessler, M. R. (2015) · Polymer · doi:10.1016/j.polymer.2015.04.086 · Cited by 667
Lin, L.-S., Cong, Z.-X., Cao, J.-B., Ke, K.-M., Peng, Q.-L., Gao, J., Yang, H.-H., Liu, G., & Chen, X. (2014) · ACS Nano · doi:10.1021/nn500722y · Cited by 653
Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites
Majeed, K., Jawaid, M., Hassan, A., Abu Bakar, A., Abdul Khalil, H. P. S., Salema, A. A., & Inuwa, I. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.10.044 · Cited by 617
Krishnamoorthy, M., Hakobyan, S., Ramstedt, M., & Gautrot, J. E. (2014) · Chemical Reviews · doi:10.1021/cr500252u · Cited by 604
Xiao, P., Zhang, J., Dumur, F., Tehfe, M. A., Morlet-Savary, F., Graff, B., Gigmes, D., Fouassier, J. P., & Lalevée, J. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.09.001 · Cited by 582
Functional polymer–clay nanotube composites with sustained release of chemical agents
Lvov, Y., & Abdullayev, E. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.009 · Cited by 572
Silver nanoparticles in the environment: Sources, detection and ecotoxicology
McGillicuddy, E., Murray, I., Kavanagh, S., Morrison, L., Fogarty, A., Cormican, M., Dockery, P., Prendergast, M., Rowan, N., & Morris, D. (2017) · Science of The Total Environment · doi:10.1016/j.scitotenv.2016.10.041 · Cited by 564
New advances in polymer/layered silicate nanocomposites
Schmidt, D., Shah, D., & Giannelis, E. P. (2002) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(02)00049-9 · Cited by 505
Controlled/Living Radical Polymerization in Dispersed Systems: An Update
Zetterlund, P. B., Thickett, S. C., Perrier, S., Bourgeat-Lami, E., & Lansalot, M. (2015) · Chemical Reviews · doi:10.1021/cr500625k · Cited by 485
Functionalized bacterial cellulose derivatives and nanocomposites
Hu, W., Chen, S., Yang, J., Li, Z., & Wang, H. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.09.102 · Cited by 448
Nanoclay-modified asphalt materials: Preparation and characterization
You, Z., Mills-Beale, J., Foley, J. M., Roy, S., Odegard, G. M., Dai, Q., & Goh, S. W. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.06.070 · Cited by 439
Bahadır, E. B., & Sezgintürk, M. K. (2015) · Analytical Biochemistry · doi:10.1016/j.ab.2015.03.011 · Cited by 424
Knopfmacher, O., Hammock, M. L., Appleton, A. L., Schwartz, G., Mei, J., Lei, T., Pei, J., & Bao, Z. (2014) · Nature Communications · doi:10.1038/ncomms3954 · Cited by 415
Barsan, M. M., Ghica, M. E., & Brett, C. M. A. (2015) · Analytica Chimica Acta · doi:10.1016/j.aca.2015.02.059 · Cited by 395
Hamedi, M. M., Hajian, A., Fall, A. B., Håkansson, K., Salajkova, M., Lundell, F., Wågberg, L., & Berglund, L. A. (2014) · ACS Nano · doi:10.1021/nn4060368 · Cited by 381
Organo and inorgano-organo-modified clays in the remediation of aqueous solutions: An overview
Lee, S.-M., & Tiwari, D. (2012) · Applied Clay Science · doi:10.1016/j.clay.2012.02.006 · Cited by 373
Hui, C. M., Pietrasik, J., Schmitt, M., Mahoney, C., Choi, J., Bockstaller, M. R., & Matyjaszewski, K. (2014) · Chemistry of Materials · doi:10.1021/cm4023634 · Cited by 367
Clay and non-clay minerals in the pharmaceutical and cosmetic industries Part II. Active ingredients
Carretero, M. I., & Pozo, M. (2010) · Applied Clay Science · doi:10.1016/j.clay.2009.10.016 · Cited by 355
Polymer modified clay minerals: A review
Liu, P. (2007) · Applied Clay Science · doi:10.1016/j.clay.2007.01.004 · Cited by 352
Pandey, S. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.06.115 · Cited by 338
Clay–polymer nanocomposites (CPNs): Adsorbents of the future for water treatment
Unuabonah, E. I., & Taubert, A. (2014) · Applied Clay Science · doi:10.1016/j.clay.2014.06.016 · Cited by 306
Makaremi, M., Pasbakhsh, P., Cavallaro, G. P., Lazzara, G., Aw, Y. K., Lee, S. M., & Milioto, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04297 · Cited by 294
A Review of Advances of Nanotechnology in Asphalt Mixtures
Yang, J., & Tighe, S. (2013) · Procedia - Social and Behavioral Sciences · doi:10.1016/j.sbspro.2013.08.144 · Cited by 290
Clay nanoparticles for regenerative medicine and biomaterial design: A review of clay bioactivity
Mousa, M., Evans, N. D., Oreffo, R. O. C., & Dawson, J. I. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.12.024 · Cited by 286
Polymer nanocomposites: Synthetic and natural fillers a review
Gacitúa E., W., Ballerini A., A., & Zhang, J. (2014) · Maderas. Ciencia y Tecnología · doi:10.4067/s0718-221x2005000300002 · Cited by 248
Ohtsuki, A., Lei, L., Tanishima, M., Goto, A., & Kaji, H. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b02617 · Cited by 243
Jin, Y., Liu, C., Chai, W., Compaan, A., & Huang, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03613 · Cited by 238
“Click” chemistry in polymeric scaffolds: Bioactive materials for tissue engineering
Zou, Y., Zhang, L., Yang, L., Zhu, F., Ding, M., Lin, F., Wang, Z., & Li, Y. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2018.01.023 · Cited by 219
Kong, F.-Y., Gu, S.-X., Li, W.-W., Chen, T.-T., Xu, Q., & Wang, W. (2014) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2013.12.067 · Cited by 217
Recent advances and remaining challenges for polymeric nanocomposites in healthcare applications
Kumar, S., Sarita, Nehra, M., Dilbaghi, N., Tankeshwar, K., & Kim, K.-H. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.03.001 · Cited by 215
Dai, X., Guo, Q., Zhao, Y., Zhang, P., Zhang, T., Zhang, X., & Li, C. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09267 · Cited by 213
Beyazit, S., Tse Sum Bui, B., Haupt, K., & Gonzato, C. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.04.001 · Cited by 201
Challenges and Alternatives to Plastics Recycling in the Automotive Sector
Miller, L., Soulliere, K., Sawyer-Beaulieu, S., Tseng, S., & Tam, E. (2014) · Materials · doi:10.3390/ma7085883 · Cited by 190
Photoinitiated atom transfer radical polymerization: Current status and future perspectives
Dadashi-Silab, S., Atilla Tasdelen, M., & Yagci, Y. (2014) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.27327 · Cited by 175
Carbon nanotubes leading the way forward in new generation 3D tissue engineering
Hopley, E. L., Salmasi, S., Kalaskar, D. M., & Seifalian, A. M. (2014) · Biotechnology Advances · doi:10.1016/j.biotechadv.2014.05.003 · Cited by 166
Shanmugam, S., & Boyer, C. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b05903 · Cited by 165
Characteristic Properties of Nanoclays and Characterization of Nanoparticulates and Nanocomposites
Nazir, M. S., Mohamad Kassim, M. H., Mohapatra, L., Gilani, M. A., Raza, M. R., & Majeed, K. (2016) · Engineering Materials · doi:10.1007/978-981-10-1953-1_2 · Cited by 165
El‐Korashy, S. A., Elwakeel, K. Z., & El-Hafeiz, A. A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.073 · Cited by 152
Albdiry, M., Yousif, B. F., Ku, H. S., & Lau, K.-T. (2012) · Journal of Composite Materials · doi:10.1177/0021998312445592 · Cited by 147
Adsorption of pharmaceuticals in water using Fe 3 O 4 coated polymer clay composite
Arya, V., & Philip, L. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.06.033 · Cited by 147
The Impact of Halloysite on the Thermo-Mechanical Properties of Polymer Composites
Gaaz, T. S., Sulong, A. B., Kadhum, A. A. H., Al‐Amiery, A. A., Nassir, M. H., & Jaaz, A. H. (2017) · Molecules · doi:10.3390/molecules22050838 · Cited by 142
Effect of ionic strength on shear-thinning nanoclay–polymer composite hydrogels
Sheikhi, A., Afewerki, S., Öklü, R., Gaharwar, A. K., & Khademhosseini, A. (2018) · Biomaterials Science · doi:10.1039/c8bm00469b · Cited by 138
Creep and recovery of polystyrene composites filled with graphene additives
Tang, L., Wang, X., Gong, L., Peng, K., Zhao, L., Chen, Q., Wu, L., Jiang, J., & Lai, G.-Q. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.11.028 · Cited by 136
Recent advances in RAFT-mediated surfactant-free emulsion polymerization
Zhou, J., Yao, H., & Ma, J. (2018) · Polymer Chemistry · doi:10.1039/c8py00065d · Cited by 122
Saha, N. R., Sarkar, G., Roy, I., Rana, D. K., Bhattacharyya, A., Adhikari, A., Mukhopadhyay, A., & Chattopadhyay, D. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.10.046 · Cited by 121
Nanoengineered Osteoinductive and Elastomeric Scaffolds for Bone Tissue Engineering
Kerativitayanan, P., Tatullo, M., Khariton, M., Joshi, P., Perniconi, B., & Gaharwar, A. K. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00029 · Cited by 109
Nanda, R., Sasmal, A., & Nayak, P. L. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.09.009 · Cited by 107
Yahiaoui, F., Benhacine, F., Ferfera‐Harrar, H., Habi, A., Hadj‐Hamou, A. S., & Grohens, Y. (2014) · Polymer Bulletin · doi:10.1007/s00289-014-1269-0 · Cited by 106
Nanoclay Based Composite Scaffolds for Bone Tissue Engineering Applications
Ambre, A. H., Katti, K. S., & Katti, D. R. (2010) · Journal of Nanotechnology in Engineering and Medicine · doi:10.1115/1.4002149 · Cited by 105
Abedi, S., & Abdouss, M. (2014) · Applied Catalysis A General · doi:10.1016/j.apcata.2014.01.028 · Cited by 103
Research Progress on Properties and Applications of Polymer/Clay Nanocomposite
Gul, S., Kausar, A., Muhammad, B., & Jabeen, S. (2015) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098699 · Cited by 97
Lago, E., Tóth, P. S., Pugliese, G., Pellegrini, V., & Bonaccorso, F. (2016) · RSC Advances · doi:10.1039/c6ra21962d · Cited by 94
Role of polymers in the design of 3D carbon nanotube-based scaffolds for biomedical applications
Serrano, M. C., Gutiérrez, M. C., & del Monte, F. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.02.004 · Cited by 92
Luo, Y., Dolder, C. K., Walker, J. M., Mishra, R., Dean, D., & Becker, M. L. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00014 · Cited by 92
Nitroxide-mediated polymerization of styrene initiated from the surface of laponite clay platelets
Konn, C., Morel, F., Beyou, E., Chaumont, P., & Bourgeat-Lami, E. (2007) · Macromolecules · doi:10.1021/ma070283g · Cited by 91
Nanoparticle Motion in Entangled Melts of Linear and Nonconcatenated Ring Polymers
Ge, T., Kalathi, J. T., Halverson, J. D., Grest, G. S., & Rubinstein, M. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02632 · Cited by 81
Polyaniline (PANI) modified bentonite by plasma technique for U(VI) removal from aqueous solution
Liu, X., Cheng, C., Xiao, C., Shao, D. D., Xu, Z., Wang, J., Hu, S., Li, X., & Wang, W. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.03.095 · Cited by 80
Biomimetic Reversible Heat-Stiffening Polymer Nanocomposites
Cudjoe, E., Khani, S., Way, A. E., Hore, M. J. A., Maia, J. M., & Rowan, S. J. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00215 · Cited by 80
Guerrouache, M., Mahouche‐Chergui, S., Chehimi, M. M., & Carbonnier, B. (2012) · Chemical Communications · doi:10.1039/c2cc33134a · Cited by 78
Nikolaidis, A. K., & Achilias, D. S. (2018) · Polymers · doi:10.3390/polym10050491 · Cited by 76
In situ Synthesis of Polymer/Clay Nanocomposites by Living and Controlled/Living Polymerization
Taşdelen, M. A., Kreutzer, J., & Yağcı, Y. (2009) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200900590 · Cited by 75
Aranaz, I., Gutiérrez, M. C., Ferrer, M. L., & del Monte, F. (2014) · Marine Drugs · doi:10.3390/md12115619 · Cited by 74
Montmorillonite reinforced polymer nanocomposite antibacterial film
Savaş, L. A., & Hançer, M. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.02.021 · Cited by 71
Parallel Carbon Nanotube Stripes in Polymer Thin Film with Remarkable Conductive Anisotropy
Huang, J., Zhu, Y., Jiang, W. J., Yin, J., Tang, Q., & Yang, X. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am404758d · Cited by 71
Li, H., Jiang, H., & Haraguchi, K. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02305 · Cited by 71
Zhang, Y., & Park, S. (2018) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.06.004 · Cited by 71
Zang, L., Qiu, J., Yang, C., & Sakai, E. (2016) · Scientific Reports · doi:10.1038/srep20470 · Cited by 67
Polymer Nanocomposites via Click Chemistry Reactions
Arslan, M., & Taşdelen, M. A. (2017) · Polymers · doi:10.3390/polym9100499 · Cited by 60
Kim, J. M., Lee, M. H., Ko, J. A., Kang, D., Bae, H., & Park, H. J. (2018) · Journal of Food Science · doi:10.1111/1750-3841.14012 · Cited by 58
Zhang, Z., Zhang, P., Wang, Y., & Zhang, W. (2016) · Polymer Chemistry · doi:10.1039/c6py00675b · Cited by 57
Huang, Y., Yang, K., & Dong, J. (2006) · Macromolecular Rapid Communications · doi:10.1002/marc.200600131 · Cited by 54
Salmi, Z., Benzarti, K., & Chehimi, M. M. (2013) · Langmuir · doi:10.1021/la402710r · Cited by 54
Jollands, M. C., & Gupta, R. K. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32475 · Cited by 53
Roghani‐Mamaqani, H., Haddadi‐Asl, V., Najafi, M., & Salami‐Kalajahi, M. (2010) · Polymer Composites · doi:10.1002/pc.20975 · Cited by 51
Microwave Synthesis and Melt Blending of Glycerol Based Toughening Agent with Poly(lactic acid)
Coativy, G., Misra, M., & Mohanty, A. K. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01596 · Cited by 51
Le-Masurier, S. P., Gody, G., Perrier, S., & Granville, A. M. (2014) · Polymer Chemistry · doi:10.1039/c4py00025k · Cited by 49
(2017) · doi:10.1016/b978-0-323-46153-5.00001-x · Cited by 48
Özköse, U. U., Altınkök, Ç., Yılmaz, Ö., Alptürk, O., & Taşdelen, M. A. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.07.004 · Cited by 48
Rajan, M., Murugan, M., Ponnamma, D., Sadasivuni, K. K., & Munusamy, M. A. (2016) · Biomedicine & Pharmacotherapy · doi:10.1016/j.biopha.2016.06.026 · Cited by 48
New protocol to determine the equilibrium constant of atom transfer radical polymerization
Lorandi, F., Fantin, M., Isse, A. A., Gennaro, A., & Matyjaszewski, K. A. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.12.011 · Cited by 45
Jlassi, K., Chandran, S., Mičušík, M., Benna, M., Yağcı, Y., Thomas, S., & Chehimi, M. M. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.09.004 · Cited by 44
Shahidi, S., & GHORANNEVISS, M. (2013) · Journal of Fusion Energy · doi:10.1007/s10894-013-9645-6 · Cited by 42
Production of new 3D scaffolds for bone tissue regeneration by rapid prototyping
Fradique, R., Correia, T. R., Miguel, S. P., de Sá, K. D., Figueira, D. R., Mendonça, A., & Correia, I. J. (2016) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-016-5681-x · Cited by 42
Ethylene–octene copolymer (engage)–clay nanocomposites: Preparation and characterization
Maiti, M., Sadhu, S. D., & Bhowmick, A. K. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23348 · Cited by 41
Hou, Y., Jiang, J., Li, K., Zhang, Y., & Liu, J. (2014) · The Journal of Physical Chemistry B · doi:10.1021/jp411610a · Cited by 40
Moustafa, H., Galliard, H., Vidal, L., & Dufresne, A. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.12.009 · Cited by 39
Karamane, M., Raihane, M., Taşdelen, M. A., Uyar, T., Lahcini, M., Ilsouk, M., & Yağcı, Y. (2016) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28403 · Cited by 38
Yu, F., Deng, H., Bai, H., Zhang, Q., Wang, K., Chen, F., & Fu, Q. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00347 · Cited by 37
Cruz, S. M., & Viana, J. C. (2014) · Journal of Elastomers & Plastics · doi:10.1177/0095244314534097 · Cited by 37
Ebrahimi, H., Abedi, B., Bodaghi, H., Davarynejad, G. H., Haratizadeh, H., & Conte, A. (2017) · Journal of Food Processing and Preservation · doi:10.1111/jfpp.13466 · Cited by 36
Othman, R., Vladisavljević, G. T., Thomas, N. L., & Nagy, Z. K. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2016.01.042 · Cited by 34
Atta, A. M., Al‐Lohedan, H. A., Ezzat, A. O., Issa, Z. A., & Oumi, A. B. (2016) · Journal of Polymer Research · doi:10.1007/s10965-016-0963-z · Cited by 33
Gorrasi, G., Attanasio, G., Izzo, L., & Sorrentino, A. (2016) · Polymer International · doi:10.1002/pi.5309 · Cited by 31
Noventa, S., Hacker, C., Rowe, D., Elgy, C. N., & Galloway, T. S. (2017) · Nanotoxicology · doi:10.1080/17435390.2017.1418920 · Cited by 30
Beuguel, Q., Ville, J., Crépin‐Leblond, J., Médéric, P., & Aubry, T. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.09.034 · Cited by 26
Photo-induced SI-ATRP for the synthesis of photoclickable intercalated clay nanofillers
Vo, V. S., Mahouche‐Chergui, S., Babinot, J., Nguyen, V., Naı̈li, S., & Carbonnier, B. (2016) · RSC Advances · doi:10.1039/c6ra14724k · Cited by 24
Copper-complexed clay/poly-acrylic acid composites: Extremely efficient adsorbents of ammonia gas
Liu, E., Sarkar, B., Wang, L., & Naidu, R. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.12.012 · Cited by 23
Jlassi, K., Benna, M., Chehimi, M. M., & Yağcı, Y. (2014) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27505 · Cited by 22
Nair, P. P., George, K. E., & Jayakrishnan, N. (2015) · Polymer Composites · doi:10.1002/pc.23561 · Cited by 21
Yussuf, A. A., Al‐Saleh, M. A., Al-Samhan, M., Al-Enezi, S., Al-Banna, A., & Abraham, G. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-0946-0 · Cited by 16
Xie, H., Wu, Q., & Shi, W. (2014) · Applied Clay Science · doi:10.1016/j.clay.2014.06.027 · Cited by 14
Cherif, G. A., Kerkour, A., Baouz, T., Pillin, I., & Grohens, Y. (2018) · Packaging Technology and Science · doi:10.1002/pts.2388 · Cited by 14
Yıldız, G., & Şenkal, B. F. (2016) · Separation Science and Technology · doi:10.1080/01496395.2016.1165707 · Cited by 12
Tsuge, Y., Moriya, T., & Shiratori, S. S. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b01397 · Cited by 12
Cardoso, R. S., Aguiar, V. D. O., & Marques, M. D. F. V. (2017) · Journal of Composite Materials · doi:10.1177/0021998317690444 · Cited by 12
Elsayed, N. H., Elsharif, M., & Mohamed, W. S. (2018) · Egyptian Journal of Chemistry · doi:10.21608/ejchem.2018.2949.1244 · Cited by 9
Polymer/Graphene Nanocomposites for Food Packaging
Merritt, S. M. J., Wan, C., Shollock, B. A., Patole, S., & Haddleton, D. M. (2018) · doi:10.1002/9781119160243.ch8 · Cited by 9
Synthesis and characterization of copolymers of 3-n-hexyl thiophene with 3-cyclohexyl thiophene
Somanathan, N., & Wegner, G. (1999) · Acta Polymerica · doi:10.1002/(sici)1521-4044(19990401)50:4<122::aid-apol122>3.0.co;2-x · Cited by 6
Cited by
Mazari, S. A., Ali, E., Abro, R., Khan, F. S. A., Ahmed, I., Ahmed, M., Nizamuddin, S., Siddiqui, T. H., Hossain, N., Mubarak, N. M., et al. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105028 · Cited by 316
Bikiaris, N. D., Koumentakou, I., Samiotaki, C., Meimaroglou, D., Varytimidou, D., Karatza, A., Kalantzis, Z., Roussou, M., Bikiaris, R. D., & Papageorgiou, G. Z. (2023) · Polymers · doi:10.3390/polym15051196 · Cited by 279
Asghar, N., Hussain, A., Nguyen, D. A., Ali, S., Hussain, I., Junejo, A., & Ali, A. (2024) · Journal of Nanobiotechnology · doi:10.1186/s12951-023-02151-3 · Cited by 258
Polylactic acid (PLA)-based multifunctional and biodegradable nanocomposites and their applications
Islam, M. S., Elahee, G. M. F., Fang, Y., Yu, X. (., Advincula, R. C., & Cao, C. (. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112842 · Cited by 86
Nanoclay-composite hydrogels for bone tissue engineering
Hwang, H. S., & Lee, C.-S. (2024) · Gels · doi:10.3390/gels10080513 · Cited by 60
Metadata
- Authors
- Guo, F., Aryana, S., Han, Y., & Jiao, Y.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2018-09-19
- Volume
- 8
- Issue
- 9
- Pages
- 1696
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W2891983335
- Cited by
- 445
- References
- 124
- FWCI
- 12.53
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.