Bearing Fault Diagnosis under Variable Rotational Speeds Using Stockwell Transform-Based Vibration Imaging and Transfer Learning
Open accessThe DOI matches its Crossref record; 40 of the 41 references it cites were found in a registry or an index.
Abstract
In this paper, discrete orthonormal Stockwell transform (DOST)-based vibration imaging is proposed as a preprocessing step for supporting load and rotational speed invariant scenarios for signals of various health conditions. For any health condition, features can easily be extracted from its generated health pattern. To automate the feature selection process, a convolutional neural network (CNN)-based transfer learning (TL) approach for diagnosis has also been introduced. Transfer learning allows an established model to use feature knowledge obtained under one set of working conditions through hidden layers to diagnose faults that occur under other working conditions. The network learns from the massive source dataset, and that knowledge is applied to the target data to identify faults. Using the bearing dataset of Case Western Reserve University, the proposed approach yields an average 99.8% classification accuracy and, specifically, 99.99% for healthy condition (HC), 99.95% for inner race fault (IRF), 99.96% for ball fault (BF), 99.68% for outer race fault for 12 o’clock sensor position (ORF@12), 99.93% for outer race fault for 3 o’clock sensor position (ORF@3), and 99.89% for outer race fault for 6 o’clock sensor position (ORF@6). In this paper, the proposed approach is compared with conventional artificial neural networks (ANNs), support vector machines (SVMs), hierarchical CNNs, and deep autoencoders. The proposed approach outperforms these conventional methods in the accuracy under all working conditions.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Compared with the diagnosis model just trained with a small number of target-domain samples, the fine-tuned diagnosis model presented the faster convergence rate and higher diagnosis accuracy.”
From Applications of machine learning to machine fault diagnosis: A review and roadmap (2020) · cites this paper as [37]
Citations
Cites
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805 · cited 1×
“This network makes optimal use of the indigenous connections (instead of fully-connected layers), weight distribution, and spatial or progressive subsampling to achieve invariance of shifting, scaling, and distortion in their inputs [39,40].”
BackgroundA review on machinery diagnostics and prognostics implementing condition-based maintenance
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.012 · Cited by 4,816
Localization of the complex spectrum: the S transform
Stockwell, R. G., Mansinha, L., & Lowe, R. P. (1996) · IEEE Transactions on Signal Processing · doi:10.1109/78.492555 · Cited by 3,486 · cited 1×
“If a 1D function of time t for a constant frequency f is represented as V s ( τ , f ) , then the continuous [30,35] ST of a function h ( t ) is: Equation (2) demonstrates the change of the amplitude and phase for this frequency over time.”
BackgroundA review on electrical motors energy use and energy savings
Saidur, R. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.018 · Cited by 499 · cited 1×
“In electromechanical engineering, motion is usually determined by mechanical device structures (e.g., rotating machines or induction motors), which leads to satisfactory records of nearly 70% of the gross energy ingestion in modern manufacturing economics [1,2].”
BackgroundCao, P., Zhang, S., & Tang, J. (2018) · IEEE Access · doi:10.1109/access.2018.2837621 · Cited by 460 · cited 3×
“Thus, the last layer of the target network is trained, providing an accuracy of output based on the learning from the source network [34].”
BackgroundMethodA novel method for intelligent fault diagnosis of rolling bearings using ensemble deep auto-encoders
Shao, H., Jiang, H., Lin, Y., & Li, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.09.026 · Cited by 460 · cited 3×
“Examples include deep autoencoders [27,28], ANNs (artificial neural networks), and hierarchical convolution network [29].”
BackgroundMethodLu, C., Wang, Z., & Zhou, B. (2017) · Advanced Engineering Informatics · doi:10.1016/j.aei.2017.02.005 · Cited by 434 · cited 2×
“Examples include deep autoencoders [27,28], ANNs (artificial neural networks), and hierarchical convolution network [29].”
MethodA basis for efficient representation of the S-transform
Stockwell, R. G. (2007) · Digital Signal Processing · doi:10.1016/j.dsp.2006.04.006 · Cited by 417 · cited 2×
“To address this issue, the Stockwell transform (S-transform) is employed in this paper [30].”
BackgroundMethodTransfer learning with neural networks for bearing fault diagnosis in changing working conditions
Zhang, R., Tao, H., Wu, L., & Guan, Y. (2017) · IEEE Access · doi:10.1109/access.2017.2720965 · Cited by 378 · cited 6×
“To validate the performance of the proposed method, some recent deep learning approaches, including raw signal-based TL approach [33], hierarchical CNN-based approach [29], and ensemble deep autoencoders approach [27], are compared with the proposed method.”
BackgroundMethodInfluentialSoualhi, A., Clerc, G., & Razik, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2230598 · Cited by 264 · cited 1×
“Multiple signature analysis of vibrations and motor currents has also been researched to improve reliability [19].”
Background
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
Li, W., Huang, R., Li, J., Liao, Y., Chen, Z., He, G., Yan, R., & Gryllias, K. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108487 · Cited by 816
Artificial Intelligence in Advanced Manufacturing: Current Status and Future Outlook
Arinez, J. F., Chang, Q., Gao, R. X., Xu, C., & Zhang, J. (2020) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4047855 · Cited by 584
“Reported research on this topic this fi eld can be characterized into three categories: (1) model transfer among different working conditions [158,159], (2) model transfer among different machines [160], and (3) model transfer among different fault locations or types [161].”
Deep Transfer Learning for Bearing Fault Diagnosis: A Systematic Review Since 2016
Chen, X., Yang, R., Xue, Y., Huang, M., Ferrero, R., & Wang, Z. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3244237 · Cited by 516
“Besides replacing the output layer, Kim et al. [108] also proposed a selective parameter freezing (SPF) strategy to freeze output-sensitive parameters while tuning the model.”
MethodA systematic review of deep transfer learning for machinery fault diagnosis
Li, C., Zhang, S., Qin, Y., & Estupinan, E. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.04.045 · Cited by 472
A Review on Vibration-Based Condition Monitoring of Rotating Machinery
Tiboni, M., Remino, C., Bussola, R., & Amici, C. (2022) · Applied Sciences · doi:10.3390/app12030972 · Cited by 314
Hakim, M., Omran, A. A. B., Ahmed, A. N., Al-Waily, M., & Abdellatif, A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2022.101945 · Cited by 305
Yang, B., Lei, Y., Jia, F., Li, N., & Du, Z. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2953010 · Cited by 282
Fault diagnosis in rotating machines based on transfer learning: Literature review
Misbah, I., LEE, C. K. M., & KEUNG, K. L. (2024) · Knowledge-Based Systems · doi:10.1016/j.knosys.2023.111158 · Cited by 215
Cross-Domain Fault Diagnosis Using Knowledge Transfer Strategy: A Review
Zheng, H., Wang, R., Yang, Y., Yin, J., Li, Y., Li, Y., & Xu, M. (2019) · IEEE Access · doi:10.1109/access.2019.2939876 · Cited by 209
“[93] M. J. Hasan,M. Sohaib, and J.-M.Kim, ‘‘1DCNN-based transfer learning model for bearing fault diagnosis under variable working conditions,’’ in Proc.”
BackgroundMethodInfluentialLi, Y., Jiang, W., Zhang, G., & Shu, L. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.01.143 · Cited by 173
Big data analytics for smart factories of the future
Gao, R. X., Wang, L., Helu, M., & Teti, R. (2020) · CIRP Annals · doi:10.1016/j.cirp.2020.05.002 · Cited by 170
“Hasan and Kim demonstrated the effectiveness of such method for bearing fault diagnosis under different working conditions [70].”
MethodMechanical fault diagnosis and prediction in IoT based on multi-source sensing data fusion
Huang, M., Liu, Z., & Tao, Y. (2020) · Simulation Modelling Practice and Theory · doi:10.1016/j.simpat.2019.101981 · Cited by 163
Wang, Z., Zhao, W., Du, W., Li, N., & Wang, J. (2021) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2021.03.016 · Cited by 147
Yang, B., Xu, S., Lei, Y., Lee, C.-G., Stewart, E., & Roberts, C. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108095 · Cited by 142
A Systematic Literature Review on Transfer Learning for Predictive Maintenance in Industry 4.0
Azari, M. S., Flammini, F., Santini, S., & Caporuscio, M. (2023) · IEEE Access · doi:10.1109/access.2023.3239784 · Cited by 155
Yang, B., Lee, C.-G., Lei, Y., Li, N., & Lü, N. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.107618 · Cited by 105
Amin, A. A., Iqbal, M. S., & Shahbaz, M. H. (2023) · Expert Systems with Applications · doi:10.1016/j.eswa.2023.121956 · Cited by 118
Fault Diagnosis Methods Based on Machine Learning and its Applications for Wind Turbines: A Review
Sun, T., Yu, G., Gao, M., Zhao, L., Bai, C., & Yang, W. (2021) · IEEE Access · doi:10.1109/access.2021.3124025 · Cited by 100
Pang, X., Xue, X., Jiang, W., & Lu, K. (2020) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2020.3029058 · Cited by 95
“Hasan and Kim [26] introduced transfer learning for bearing fault diagnosis and achieved higher accuracies.”
BackgroundAn Explainable AI-Based Fault Diagnosis Model for Bearings
Hasan, M. J., Sohaib, M., & Kim, J.-M. (2021) · Sensors · doi:10.3390/s21124070 · Cited by 92
“First, the raw signals are segmented into smaller sizes by adjustable overlapping sliding window [10,65].”
MethodSelf-citationLi, G., Hu, J., Shan, D., Ao, J., Huang, B., & Huang, Z. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109974 · Cited by 83
The Bearing Faults Detection Methods for Electrical Machines—The State of the Art
Khan, M. A., Asad, B., Kudelina, K., Vaimann, T., & Kallaste, A. (2022) · Energies · doi:10.3390/en16010296 · Cited by 89
An integrated long-short term memory algorithm for predicting polar westerlies wave height
Ni, C., & Ma, X. (2020) · Ocean Engineering · doi:10.1016/j.oceaneng.2020.107715 · Cited by 71
Transfer Learning With Time Series Data: A Systematic Mapping Study
Weber, M., Auch, M., Doblander, C., Mandl, P., & Jacobsen, H. (2021) · IEEE Access · doi:10.1109/access.2021.3134628 · Cited by 86
A deep adaptive learning method for rolling bearing fault diagnosis using immunity
Tian, Y., & Liu, X. (2019) · Tsinghua Science & Technology · doi:10.26599/tst.2018.9010144 · Cited by 63
“When using CNN for fault diagnosis, the two-Dimensional (2D) images are generated by the time and frequency domain waveform of the raw fault signals and used as the input data of CNN to extract the fault features [13,14] .”
MethodSun, J., Wen, J., Yuan, C., Liu, Z., & Xiao, Q. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3131722 · Cited by 57
Deep learning in industrial machinery: A critical review of bearing fault classification methods
Rehman, A. U., Jiao, W., Jiang, Y., Wei, J., Sohaib, M., Sun, J., Shiju, E., Rehman, K. U., & Chi, Y. (2025) · Applied Soft Computing · doi:10.1016/j.asoc.2025.112785 · Cited by 66
ANS-net: anti-noise Siamese network for bearing fault diagnosis with a few data
Fang, Q., & Wu, D. (2021) · Nonlinear Dynamics · doi:10.1007/s11071-021-06393-4 · Cited by 53
Wang, S., Wang, Q., Xiao, Y., Liu, W., & Shang, M. (2022) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2022.106424 · Cited by 53
Zhao, J., Lu, P., Du, C., & Cao, F. (2023) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2023.3333763 · Cited by 46
“…fault diagnosis field, transfer learning allows the utilization of a diagnostic model trained in one domain source to be transferred and applied, along with its learned model and/or parameters, to address fault diagnosis problems in different scenarios within a target domain source [18], [19], [20].”
BackgroundBrusa, E. G. M., Delprete, C., & Maggio, L. G. D. (2021) · Applied Sciences · doi:10.3390/app112411663 · Cited by 55
Hasan, M. J., Islam, M. M. M., & Kim, J.-M. (2020) · Measurement · doi:10.1016/j.measurement.2020.108478 · Cited by 45
Self-citationFault Diagnosis under Variable Working Conditions Based on STFT and Transfer Deep Residual Network
Du, Y., Wang, A., Wang, S., He, B., & Meng, G. (2020) · Shock and Vibration · doi:10.1155/2020/1274380 · Cited by 50
Bearing Fault Diagnosis Using Multidomain Fusion-Based Vibration Imaging and Multitask Learning
Hasan, M. J., Islam, M. M. M., & Kim, J.-M. (2021) · Sensors · doi:10.3390/s22010056 · Cited by 46
“3”
Self-citationGrover, C., & Turk, N. (2021) · Engineering Science and Technology an International Journal · doi:10.1016/j.jestch.2021.08.006 · Cited by 41
Ahmed, H., & Nandi, A. K. (2021) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-021-00553-8 · Cited by 42
“Moreover, Kang and Kim presented a method for fault diagnosis of multiple induction motor faults using a 2-”
MethodVibration Image Representations for Fault Diagnosis of Rotating Machines: A Review
Ahmed, H., & Nandi, A. K. (2022) · Machines · doi:10.3390/machines10121113 · Cited by 48
Hasan, M. J., Sohaib, M., & Kim, J.-M. (2020) · Sensors · doi:10.3390/s20247205 · Cited by 35
“According to the definition, the main goal of TL is to transfer knowledge obtained from one task to another task that resembles it closely to improve the diagnostic performance of the new task in a short amount of time [13].”
BackgroundMethodSelf-citationDeep Transfer Learning Framework for Bearing Fault Detection in Motors
Kumar, P., Kumar, P., Hati, A. S., & Kim, H. S. (2022) · Mathematics · doi:10.3390/math10244683 · Cited by 33
“Hasan and Kim [32] have developed a bearing FD approach using the vibration data conversion by Stockwell transformation and transfer learning.”
MethodA Deep-Learning-Based Bearing Fault Diagnosis Using Defect Signature Wavelet Image Visualization
Duong, B. P., Kim, J. Y., Jeong, I.-K., Im, K., Kim, C. H., & Kim, J. M. (2020) · Applied Sciences · doi:10.3390/app10248800 · Cited by 32
Self-citationChang, H., Wang, Y.-C., Shih, Y.-Y., & Kuo, C. (2022) · Applied Sciences · doi:10.3390/app12084080 · Cited by 35
“Methods Professional system-based method [21], ANN, SVM [22], Other Intelligent method [23] AE [24], DBN [25], CNN, ResNet [26] method Feature-based approach [27], GAN [28], Case-based approach [29], Parametric method [30]”
MethodGas path fault diagnosis of aircraft engine using HELM and transfer learning
Liu, J. (2022) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2022.105149 · Cited by 33
Zhou, J. H., Zheng, L., Wang, Y., & Gogu, C. (2020) · IEEE Access · doi:10.1109/access.2020.2990739 · Cited by 33
“Similar work based on deep transfer learning can also be found in [30]–[33].”
BackgroundDeep Transfer Learning-Based Fault Diagnosis for Gearbox under Complex Working Conditions
Wan, Z., Yang, R., & Huang, M. (2020) · Shock and Vibration · doi:10.1155/2020/8884179 · Cited by 34
“Hasan adopted transfer learning and convolutional neural network in bearing to make sure that the model is adaptable in different working conditions [29].”
Rajput, D. S., Meena, G., Acharya, M., & Mohbey, K. K. (2023) · Measurement Sensors · doi:10.1016/j.measen.2023.100701 · Cited by 31
A comprehensive review of mechanical fault diagnosis methods based on convolutional neural network
Hou, J., Lu, X., Zhong, Y., He, W., Zhao, D., & Zhou, F. (2023) · Journal of Vibroengineering · doi:10.21595/jve.2023.23391 · Cited by 35
Application of Rotating Machinery Fault Diagnosis Based on Deep Learning
Cui, W., Meng, G., Wang, A., Zhang, X., & Ding, J. (2021) · Shock and Vibration · doi:10.1155/2021/3083190 · Cited by 35
“For motor bearings under different operating conditions, Zhang et al. [159] and Hasan et al. [160] used target operating conditions samples to fine-tune the pretrained diagnostic model.”
BackgroundJin, C., Shin, S., Yu, J., & Rhee, S. (2020) · IEEE Access · doi:10.1109/access.2020.3041274 · Cited by 26
“Hasan and Kim [31] applied CNN-based transfer learning to achieve higher bearing failure diagnosis performance than those of an ANN, a support vector machine (SVM), and other methods.”
MethodA New Deep Stacked Architecture for Multi-Fault Machinery Identification With Imbalanced Samples
Karamti, H., Lashin, M. M. A., Alrowais, F., & Mahmoud, A. M. (2021) · IEEE Access · doi:10.1109/access.2021.3071796 · Cited by 26
“Hasan and Kim [20] converted features of the vibration signal in the form of images, then used conventional methods to classify the faults of bearings.”
MethodKaji, M., Parvizian, J., & van de Venn, H. W. (2020) · Applied Sciences · doi:10.3390/app10248948 · Cited by 33
Wang, B., Baraldi, P., & Zio, E. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3222400 · Cited by 28
“CNNandTL havebeencombinedforbearingfaultdiagnosticsundervariable workingconditions[23].”
Integrated deep learning model for predicting electrical power generation from wave energy converter
Ni, C., Ma, X., & Wang, J. (2019) · International Conference on Automation and Computing (ICAC) · doi:10.23919/iconac.2019.8895237 · Cited by 23
“The variable σg is the sigmoid function, and σh and σc are the hyperbolic tangent functions, respectively [13][14].”
BackgroundLei, T., Pan, F., Hu, J., Xu, H., & Li, B. (2025) · Scientific Reports · doi:10.1038/s41598-025-88353-1 · Cited by 32
“Parameter-based transfer learning technique, for variable condition motor bearing fault diagnosis scenarios, include Zhang et al. and Hasan et al.‘s fine-tuning of fault diagnosis models using samples under target working conditions 21,22 .”
Liu, Q., Feng, C., Song, Z., Louis, J., & Zhou, J. H. (2019) · Applied Sciences · doi:10.3390/app9224871 · Cited by 25
“…proven that TL forms of CNN have good generalization, and compared to the result of prototypes, CNN-TL models have a stronger image feature extraction ability outside the range of the training data [53,60,61]. the accelerated surface area and porosimetry system ASAP 2020 ( , Norcross, GA, USA).”
ResultIdentification of structural damage using S-transform from 1D and 2D mode shapes
Katunin, A. (2020) · Measurement · doi:10.1016/j.measurement.2020.108656 · Cited by 20
Braig, M., & Zeiler, P. (2022) · IEEE Access · doi:10.1109/access.2022.3233220 · Cited by 24
“The following applications for condition diagnosis can be found in the literature: bearings [66], [99], [100], [101], aircraft engines [102], quadrotor drones [103], batteries [88], [104], [105], gas turbines [106], tanks [107], and gearboxes and rotors [108].”
BackgroundAn Improved ABC Algorithm and Its Application in Bearing Fault Diagnosis with EEMD
Chen, W., & Xiao, Y. (2019) · Algorithms · doi:10.3390/a12040072 · Cited by 19
Pre-Processing Method to Improve Cross-Domain Fault Diagnosis for Bearing
Kim, T., & Chai, J. (2021) · Sensors · doi:10.3390/s21154970 · Cited by 22
Khan, A., Kim, J.-S., & Kim, H. S. (2021) · Mathematics · doi:10.3390/math10010080 · Cited by 19
Self-citationDeep Ensemble-Based Classifier for Transfer Learning in Rotating Machinery Fault Diagnosis
Pacheco, F., Drimus, A. M., Duggen, L., Cerrada, M., Cabrera, D. R., & Sánchez, R. (2022) · IEEE Access · doi:10.1109/access.2022.3158023 · Cited by 21
“The resulting parameters, and hyperparameters are copied into a new model and will undergo small deviations from the original space; they are modified using a new cost function and a fine-tuning regime with Xt [3], [4], [6]–[8].”
BackgroundKaji, M., Parvizian, J., & van de Venn, H. W. (2020) · Preprints.org · doi:10.20944/preprints202011.0591.v1 · Cited by 14
Li, R., Pan, Y., Fan, Q., Wang, W., & Ren, R. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad5037 · Cited by 14
“Hasan and Kim utilized the discrete orthogonal Stockwell transform to convert vibration signals into images as the input of CNN for diagnosis, demonstrating the superiority of the method over traditional methods [21].”
Karpat, F., Kalay, O. C., Dırık, A. E., Doǧan, O., Korcuklu, B., & Yüce, C. (2021) · International Conference on Innovations in Intelligent Systems and Applications (INISTA) · doi:10.1109/inista52262.2021.9548378 · Cited by 14
Ainapure, A., Siahpour, S., Li, X., Majid, F., & Lee, J. (2022) · Mathematics · doi:10.3390/math10030455 · Cited by 14
“[10] proposed a deep learning-based transfer learning approach to improve the feature extraction capability of bearing fault diagnosis systems.”
BackgroundZhu, D., Zhang, Y., & Zhao, L. (2019) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/jifs-190101 · Cited by 15
Liao, R., Wang, C.-G., Peng, F., Liang, W., Zhang, Y., & Zhang, X. (2024) · IEEE Access · doi:10.1109/access.2024.3351935 · Cited by 11
Pan, N., Ye, X., Xia, P., & Zhang, G. (2024) · Applied Sciences · doi:10.3390/app14020661 · Cited by 14
An assembly precision prediction method for customized mechanical products based on GAN-FTL
Li, H., Qiu, L., Wang, Z., Zhang, S., Tan, J., & Zhang, L. (2021) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/09544054211021340 · Cited by 11
Unsupervised Method Based on Adversarial Domain Adaptation for Bearing Fault Diagnosis
Li, Y., Yang, R., & Wang, H. (2023) · Applied Sciences · doi:10.3390/app13127157 · Cited by 9
Shi, J., Du, G., Ding, R., & Zhu, Z. (2019) · Applied Sciences · doi:10.3390/app9183828 · Cited by 9
“TFA is also an effective approach for vibration-based bearing fault diagnosis under time-varying speeds as it has strong potential to characterize both time and frequency features of vibration signals, in addition to order tracking [12].”
BackgroundIntra-Domain Transfer Learning for Fault Diagnosis with Small Samples
Zhang, L., Zhang, J., Peng, Y., & Lin, J. (2022) · Applied Sciences · doi:10.3390/app12147032 · Cited by 12
Hwang, T., Ha, J. M., & Youn, B. D. (2023) · Journal of Computational Design and Engineering · doi:10.1093/jcde/qwad056 · Cited by 11
A Generalised Intelligent Bearing Fault Diagnosis Model Based on a Two-Stage Approach
Kiakojouri, A., Lu, Z., Mirring, P., Powrie, H. E. G., & Wang, L. (2024) · Machines · doi:10.3390/machines12010077 · Cited by 11
“There are three main phases in development of the ML-based models, including classical machine learning techniques, deep learning algorithms, and transfer learning techniques [10].”
BackgroundBao, J., Zheng, J., Cheng, J., Pan, H., & Tong, J. (2024) · Nonlinear Dynamics · doi:10.1007/s11071-024-09461-7 · Cited by 8
Yazar, S. (2022) · Computer Science Journal of Moldova · doi:10.56415/csjm.v30.15 · Cited by 7
“In the studies conducted, it was revealed that the TL-CNN models have better generalizations, and their qualities in extracting strong image features, apart from the training data, were shown [26, 27].”
MethodBearing Fault Diagnostics Based on the Square of the Amplitude Gains Method
Grądzki, R., Bartoszewicz, B., & Martínez, J. E. (2023) · Applied Sciences · doi:10.3390/app13042160 · Cited by 6
A hybrid network TEdgeNeXt for data-limited and resource-constrained fault diagnosis
Zhang, C., Qiao, Z., Li, H., Xu, X., Ning, S., & Xie, C. (2024) · Journal of Vibration and Control · doi:10.1177/10775463241266277 · Cited by 7
Bouzouidja, M., Soualhi, M., Soualhi, A., & Razik, H. (2024) · Energies · doi:10.3390/en17030643 · Cited by 6
Transfer learning: a cross domain LSTM way towards sustainable power predictive analytics
Garg, S., & Krishnamurthi, R. (2023) · Multimedia Tools and Applications · doi:10.1007/s11042-023-17635-5 · Cited by 8
“Secondly, all the layers except output layer are initialized from the pre-trained model and output layer is randomly initialized as done in [26].”
Industrial Fault Diagnosis using Hilbert Transform and Texture Features
Zabin, M., Choi, H., Uddin, J., Furhad, M. H., & Ullah, A. B. (2021) · IEEE International Conference on Big Data and Smart Computing (BigComp) · doi:10.1109/bigcomp51126.2021.00031 · Cited by 5
Fort, A., Landi, E., Mugnaini, M., & Vignoli, V. (2023) · Sensors · doi:10.3390/s23177546 · Cited by 6
Knežević, I., Rackov, М., Kanović, Ž., Buljević, A., Antić, A., Tica, M., & Živković, A. (2023) · Materials · doi:10.3390/ma16093529 · Cited by 4
Multilayer perceptron-based lightweight model for unsupervised cross domain fault diagnosis
Fan, L., Rao, S., & Wang, J. (2025) · Chemical Engineering Science · doi:10.1016/j.ces.2025.122426 · Cited by 4
Fault Diagnosis of Low-Noise Amplifier Circuit Based on Fusion Domain Adaptation Method
Zhang, C., Du, P., Zhou, D., Dong, Z. S., He, S., & Zhou, Z. (2024) · Actuators · doi:10.3390/act13090379 · Cited by 3
“Hasan et al. [35] from the Busan National University in South Korea used vibration imaging based on the discrete orthogonal Stockwell transform (DOST) as a preprocessing step to support various signal loads and velocity-invariant scenarios under different health conditions.”
Xing, X., Guo, W. J., & Wan, X. (2021) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-nanjing52125.2021.9613053 · Cited by 3
Sadeghi, N., Mahdavi‐Nasab, H., Zeinali, M., & Pourghassem, H. (2023) · Journal of Information Systems and Telecommunication (JIST) · doi:10.61186/jist.39680.11.44.359 · Cited by 3
Lu, O. H. T. (2024) · Expert Systems with Applications · doi:10.1016/j.eswa.2024.124297 · Cited by 4
A new scheme for extracting fault features of rolling element bearings
Liu, X., & He, K. (2022) · Engineering Computations · doi:10.1108/ec-10-2021-0630 · Cited by 3
Explainable artificial intelligence approaches for fault diagnosis in rotating machinery
Brito, L. C. (2022) · doi:10.14393/ufu.te.2022.557 · Cited by 4
Che, S., He, L., Liu, Y., & Bao, C. (2024) · Signal Image and Video Processing · doi:10.1007/s11760-024-03143-y · Cited by 2
“As a result, the model’s diagnosis accuracy drops sharply on account of the inconsistent distribution between training data and working data [2, 3, 27].”
Valtierra‐Rodriguez, M., Contreras-Hernandez, J. L., Granados‐Lieberman, D., Rivera‐Guillen, J. R., Amézquita-Sánchez, J. P., & Camarena‐Martinez, D. (2024) · Journal of Low Power Electronics and Applications · doi:10.3390/jlpea14030042 · Cited by 2
Comparison of Bearing Fault Classification Using STFT, CWT and 2D-DOST with a Lightweight CNN Model
Díaz-Saldaña, G., Morales-Velázquez, L., Antonio-Daviu, J. A., & Biot-Monterde, V. (2025) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie62713.2025.11124603 · Cited by 2
Zhang, B., Shao, Y., Chang, Z., Sun, Z., & Sui, Y. (2019) · Applied Sciences · doi:10.3390/app9030613 · Cited by 2
Kaji, M., Parvizian, J., & van de Venn, H. W. (2020) · Preprints.org · doi:10.20944/preprints202011.0591.v2 · Cited by 1
Enhancing Acoustic Emission Driven Smart Gas-Pipeline Monitoring with Graph Neural Network
Arifeen, M., Hasan, M. J., Rohan, A., Kannan, S., & Prathuru, A. K. (2025) · Springer series in advanced manufacturing · doi:10.1007/978-3-031-80154-9_8 · Cited by 5
Self-citationDeep Learning-Based Industrial Fault Diagnosis Using Induction Motor Bearing Signals
Islam, S., Chakraborty, S., Muna, J. N., Kabir, M., Ruhi, Z. M., & Uddin, J. (2023) · Advances in computational intelligence and robotics book series · doi:10.4018/978-1-7998-7852-0.ch003 · Cited by 1
Олегович, Г. С., Kondratiev, А. E., Kalinina, M. V., & Derbeneva, A. A. (2024) · Power engineering research equipment technology · doi:10.30724/1998-9903-2024-26-2-128-137 · Cited by 1
Jachymczyk, U., Knap, P., Bałazy, P., Podlasek, S., & Lalik, K. (2024) · International Carpathian Control Conference · doi:10.1109/iccc62069.2024.10569862 · Cited by 1
“• [7], [8] studied the application of CNNs for the diagnosis of bearing damage at variable speeds.”
BackgroundDomain Generalization Model of Deep Convolutional Networks Based on SAND-Mask
Wang, J., Chen, L., & Wang, R. (2022) · Algorithms · doi:10.3390/a15060215 · Cited by 1
Metadata
- Authors
- Hasan, M. J., & Kim, J.-M.
- Affiliations
- University of Ulsan (KR)
- Corresponding author
- Kim, Jong-Myon
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2018-11-22
- Volume
- 8
- Issue
- 12
- Pages
- 2357
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W2900791983
- Cited by
- 105
- References
- 41
- Citations by year
- 2026: 3 · 2025: 7 · 2024: 13 · 2023: 15 · 2022: 18 · 2021: 22 · 2020: 17 · 2019: 10
- FWCI
- 7.58
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Applied Sciences (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Open Access Institutional Repository at Robert Gordon University (Robert Gordon University) (submittedVersion, cc-by)
- Funders
- Korea Institute of Energy Technology Evaluation and Planning (20181510102160)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- bearing fault diagnosis, variable rotational speed, S-transform, vibration imaging, transfer learning, convolutional neural networks, feature selection, inner race fault, ball fault, outer race fault, Case Western Reserve University bearing dataset
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.