The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Transfer Learning with Deep Recurrent Neural Networks for Remaining Useful Life Estimation
Open accessAbstract
Prognostics, such as remaining useful life (RUL) prediction, is a crucial task in condition-based maintenance. A major challenge in data-driven prognostics is the difficulty of obtaining a sufficient number of samples of failure progression. However, for traditional machine learning methods and deep neural networks, enough training data is a prerequisite to train good prediction models. In this work, we proposed a transfer learning algorithm based on Bi-directional Long Short-Term Memory (BLSTM) recurrent neural networks for RUL estimation, in which the models can be first trained on different but related datasets and then fine-tuned by the target dataset. Extensive experimental results show that transfer learning can in general improve the prediction models on the dataset with a small number of samples. There is one exception that when transferring from multi-type operating conditions to single operating conditions, transfer learning led to a worse result.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hochreiter, S., & Schmidhuber, J. (1997) · Neural Computation · doi:10.1162/neco.1997.9.8.1735 · Cited by 102,318
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Pan, S. J., & Yang, Q. (2010) · IEEE Transactions on Knowledge and Data Engineering · doi:10.1109/tkde.2009.191 · Cited by 23,387
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
Data-based techniques focused on modern industry: An overview
Yin, S., Li, X., Gao, H., & Kaynak, O. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2308133 · Cited by 1,025
Li, S., Liu, G., Tang, X., Lu, J., & Hu, J. (2017) · Sensors · doi:10.3390/s17081729 · Cited by 211
Self-citationEnd-to-end convolutional neural network model for gear fault diagnosis based on sound signals
Yao, Y., Wang, H., Li, S., Liu, Z., Gui, G., Dan, Y., & Hu, J. (2018) · Applied Sciences · doi:10.3390/app8091584 · Cited by 120
Self-citation
Cited by
A comprehensive review of digital twin — part 1: modeling and twinning enabling technologies
Thelen, A., Zhang, X., Fink, O., Lu, Y., Ghosh, S., Youn, B. D., Todd, M. D., Mahadevan, S., Hu, C., & Hu, Z. (2022) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-022-03425-4 · Cited by 441
Limited Data Rolling Bearing Fault Diagnosis With Few-Shot Learning
Zhang, A., Li, S., Cui, Y., Yang, W., Dong, R., & Hu, J. (2019) · IEEE Access · doi:10.1109/access.2019.2934233 · Cited by 419
Self-citationFerreira, C., & Gonçalves, G. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.05.010 · Cited by 417
Kufel, J., Bargieł-Łączek, K., Kocot, S., Koźlik, M., Bartnikowska, W., Janik, M., Czogalik, Ł., Dudek, P., Magiera, M., Lis, A., et al. (2023) · Diagnostics · doi:10.3390/diagnostics13152582 · Cited by 394
Remaining useful lifetime prediction via deep domain adaptation
da Costa, P. R. D. O., Akçay, A., Zhang, Y., & Kaymak, U. (2020) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2019.106682 · Cited by 381
Metadata
- Authors
- Zhang, A., Wang, H., Li, S., Cui, Y., Liu, Z., Yang, G., & Hu, J.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2018-11-28
- Volume
- 8
- Issue
- 12
- Pages
- 2416
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W2902443160
- Cited by
- 181
- References
- 7
- FWCI
- 11.48
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.