Prediction of Surface Treatment Effects on the Tribological Performance of Tool Steels Using Artificial Neural Networks
Open accessThe DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.
Abstract
The present paper discussed the development of a reliable and robust artificial neural network (ANN) capable of predicting the tribological performance of three highly alloyed tool steel grades. Experimental results were obtained by performing plane-contact sliding tests under non-lubrication conditions on a pin-on-disk tribometer. The specimens were tested both in untreated state with different hardening levels, and after surface treatment of nitrocarburizing. We concluded that wear maps via ANN modeling were a user-friendly approach for the presentation of wear-related information, since they easily permitted the determination of areas under steady-state wear that were appropriate for use. Furthermore, the achieved optimum ANN model seemed to be a simple and helpful design/educational tool, which could assist both in educational seminars, as well as in the interpretation of the surface treatment effects on the tribological performance of tool steels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multilayer feedforward networks are universal approximators
Hornik, K., Stinchcombe, M., & White, H. (1989) · Neural Networks · doi:10.1016/0893-6080(89)90020-8 · Cited by 21,728
Multilayer feedforward networks are universal approximators
HornikK., StinchcombeM., & WhiteH. (1989) · Neural Networks · doi:10.5555/70405.70408 · Cited by 9,081
Pattern Recognition and Neural Networks
Ripley, B. D. (1996) · Cambridge University Press eBooks · doi:10.1017/cbo9780511812651 · Cited by 6,459
Bartlett, P. L. (1998) · IEEE Transactions on Information Theory · doi:10.1109/18.661502 · Cited by 1,166 · cited 1×
“There are different activation functions used to train an ANN, such as sigmoidal transfer functions, the logistic sigmoid, and the hyperbolic tangent transfer functions [58,59].”
MethodNeural Networks in Civil Engineering: 1989–2000
Adeli, H. (2001) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/0885-9507.00219 · Cited by 884 · cited 1×
“Useful and detailed state-of-the-art reports can be found in the published research works of Ripley [30] and Adeli [31].”
BackgroundDelen, D., Sharda, R., & Bessonov, M. (2006) · Accident Analysis & Prevention · doi:10.1016/j.aap.2005.06.024 · Cited by 432
Development of hybrid intelligent models for predicting TBM penetration rate in hard rock condition
Armaghani, D. J., Mohamad, E. T., Narayanasamy, M. S., Narita, N., & Yagiz, S. (2017) · Tunnelling and Underground Space Technology · doi:10.1016/j.tust.2016.12.009 · Cited by 416
Armaghani, D. J., Hajihassani, M., Mohamad, E. T., Marto, A., & Noorani, S. A. (2014) · Arabian Journal of Geosciences · doi:10.1007/s12517-013-1174-0 · Cited by 394
Prediction of surface roughness in the end milling machining using Artificial Neural Network
Zain, A. M., Haron, H., & Sharif, S. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2009.07.033 · Cited by 381
Gordan, B., Jahed Armaghani, D., Hajihassani, M., & Monjezi, M. (2016) · Engineering with Computers · doi:10.1007/s00366-015-0400-7 · Cited by 365
Research works printed but not linked: 3
- Williams, J.A. (1996). Engineering Tribology, Oxford University Press.
- Karlik, 2011, Performance analysis of various activation functions in generalized MLP architectures of neural networks, Int. J. Artif. Intell. Expert Syst., 1, 111
- Apostolopoulou, M., Douvika, M.G., Kanellopoulos, I.N., Moropoulou, A., and Asteris, P.G. (2018, January 10–13). Prediction of compressive strength of mortars using artificial neural networks. Proceedings of the 1st International Conference TMM_CH, Transdisciplinary Multispectral Modelling and Cooperation for the Preservation of Cultural Heritage, Athens, Greece.
Cited by
Duan, J., Asteris, P. G., Nguyen, H., Bui, X.-N., & Moayedi, H. (2021) · Engineering with Computers · doi:10.1007/s00366-020-01003-0 · Cited by 357
Self-citationDao, D. V., Adeli, H., Ly, H.-B., Le, L. M., Le, V. M., Le, T.-T., & Pham, B. T. (2020) · Sustainability · doi:10.3390/su12030830 · Cited by 233
The Use of Artificial Intelligence in Tribology—A Perspective
Rosenkranz, A., Marian, M., Profito, F. J., Aragon, N., & Shah, R. (2020) · Lubricants · doi:10.3390/lubricants9010002 · Cited by 187
Harandizadeh, H., Armaghani, D. J., & Khari, M. (2019) · Engineering With Computers · doi:10.1007/s00366-019-00849-3 · Cited by 143
Soft computing-based models for the prediction of masonry compressive strength
Asteris, P. G., Lourenço, P. B., Hajihassani, M., Adami, C.-E., Lemonis, M. E., Skentou, A. D., Marques, R. F. P., Nguyen, H., Rodrigues, H., & Varum, H. (2021) · Engineering Structures · doi:10.1016/j.engstruct.2021.113276 · Cited by 134
Self-citationEstimation of axial load-carrying capacity of concrete-filled steel tubes using surrogate models
Ly, H., Pham, B. T., Lü, L., Le, T.-T., Le, M. V., & Asteris, P. G. (2020) · Neural Computing and Applications · doi:10.1007/s00521-020-05214-w · Cited by 122
Self-citationGaussian Process Regression Technique to Estimate the Pile Bearing Capacity
Momeni, E., Dowlatshahi, M. B., Omidinasab, F., Maizir, H., & Armaghani, D. J. (2020) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-020-04683-4 · Cited by 120
Zhang, H., Zhou, J., Armaghani, D. J., Tahir, M. M., Pham, B. T., & Huynh, V. V. (2020) · Applied Sciences · doi:10.3390/app10030869 · Cited by 124
Skentou, A. D., Bardhan, A., Mamou, A., Lemonis, M. E., Kumar, G., Samui, P., Armaghani, D. J., & Asteris, P. G. (2022) · Rock Mechanics and Rock Engineering · doi:10.1007/s00603-022-03046-9 · Cited by 119
Self-citationInvasive Weed Optimization Technique-Based ANN to the Prediction of Rock Tensile Strength
Huang, L., Asteris, P. G., Koopialipoor, M., Armaghani, D. J., & Tahir, M. M. (2019) · Applied Sciences · doi:10.3390/app9245372 · Cited by 110
Self-citationA Gene Expression Programming Model for Predicting Tunnel Convergence
Hajihassani, M., Abdullah, S. S., Asteris, P. G., & Armaghani, D. J. (2019) · Applied Sciences · doi:10.3390/app9214650 · Cited by 106
Self-citationZhou, J., Guo, H., Koopialipoor, M., Armaghani, D. J., & Tahir, M. M. (2020) · Engineering With Computers · doi:10.1007/s00366-019-00908-9 · Cited by 107
Asteris, P. G., Mamou, A., Hajihassani, M., Hasanipanah, M., Koopialipoor, M., Le, T.-T., Kardani, N., & Armaghani, D. J. (2021) · Transportation Geotechnics · doi:10.1016/j.trgeo.2021.100588 · Cited by 104
Self-citationImprovement of ANFIS Model for Prediction of Compressive Strength of Manufactured Sand Concrete
Ly, H., Pham, B. T., Dao, D. V., Le, M. V., Lü, L., & Le, T.-T. (2019) · Applied Sciences · doi:10.3390/app9183841 · Cited by 103
Examining Hybrid and Single SVM Models with Different Kernels to Predict Rock Brittleness
Armaghani, D. J., Asteris, P. G., Askarian, B., Hasanipanah, M., Tarinejad, R., & Huynh, V. V. (2020) · Sustainability · doi:10.3390/su12062229 · Cited by 99
Self-citationTribo-informatics approaches in tribology research: A review
Yin, N., Xing, Z., He, K., & Zhang, Z. (2023) · Friction · doi:10.1007/s40544-022-0596-7 · Cited by 93
“When the preparation process or surface texture design is reversed from the expected friction state, the tribological system is optimized [80, 81].”
BackgroundOn the Use of Neuro-Swarm System to Forecast the Pile Settlement
Armaghani, D. J., Asteris, P. G., Fatemi, S. A., Hasanipanah, M., Tarinejad, R., Rashid, A. S. A., & Huynh, V. V. (2020) · Applied Sciences · doi:10.3390/app10061904 · Cited by 103
Self-citationLy, H., Le, T.-T., Vu, H.-L. T., Tran, V. Q., Lü, L., & Pham, B. T. (2020) · Sustainability · doi:10.3390/su12072709 · Cited by 92
Yong, W., Zhou, J., Armaghani, D. J., Tahir, M. M., Tarinejad, R., Pham, B. T., & Huynh, V. V. (2020) · Engineering With Computers · doi:10.1007/s00366-019-00932-9 · Cited by 97
AI for tribology: Present and future
Yin, N., Yang, P., Liu, S., Pan, S., & Zhang, Z. (2024) · Friction · doi:10.1007/s40544-024-0879-2 · Cited by 109
Armaghani, D. J., Kumar, D., Samui, P., Hasanipanah, M., & Roy, B. (2020) · Engineering With Computers · doi:10.1007/s00366-020-00997-x · Cited by 93
Applying a meta-heuristic algorithm to predict and optimize compressive strength of concrete samples
Sun, L., Koopialipoor, M., Armaghani, D. J., Tarinejad, R., & Tahir, M. M. (2019) · Engineering With Computers · doi:10.1007/s00366-019-00875-1 · Cited by 86
Sammen, S. S., Ghorbani, M. A., Malik, A., Tikhamarine, Y., AmirRahmani, M., Al-Ansari, N. A., & Chau, K. (2020) · Applied Sciences · doi:10.3390/app10155160 · Cited by 87
“In a related context, recently intense application of soft computing techniques (simple and hybrid) has been found in civil engineering for modeling various aspects such as prediction of safety factor values of retaining walls [29], prediction of the critical buckling load of structural members under compression [30],…”
MethodKumar, R., Rezapourian, M., Rahmani, R., Maurya, H. S., Kamboj, N., & Hussainova, I. (2024) · Biomimetics · doi:10.3390/biomimetics9040209 · Cited by 91
Jing, H., Rad, H. N., Hasanipanah, M., Armaghani, D. J., & Qasem, S. N. (2020) · Engineering With Computers · doi:10.1007/s00366-020-00977-1 · Cited by 80
Yang, H., Rad, H. N., Hasanipanah, M., Amnieh, H. B., & Nekouie, A. (2019) · Natural Resources Research · doi:10.1007/s11053-019-09597-z · Cited by 63
Rock-Burst Occurrence Prediction Based on Optimized Naïve Bayes Models
Ke, B., Khandelwal, M., Asteris, P. G., Skentou, A. D., Mamou, A., & Armaghani, D. J. (2021) · IEEE Access · doi:10.1109/access.2021.3089205 · Cited by 63
Self-citationNguyen, H.-L., Le, T.-H., Pham, C. T., Le, T.-T., Ho, L. S., Le, M. V., Pham, B. T., & Ly, H. (2019) · Applied Sciences · doi:10.3390/app9153172 · Cited by 65
Ly, H., Le, T.-T., Lü, L., Tran, V. Q., Le, M. V., Vu, H.-L. T., Nguyen, Q. H., & Pham, B. T. (2019) · Applied Sciences · doi:10.3390/app9245458 · Cited by 62
Kumar, R., Kariminejad, A., Antonov, M., Goljandin, D., Klimczyk, P., & Hussainova, I. (2023) · Sustainability · doi:10.3390/su151612249 · Cited by 72
Reliability Analysis of Pile Foundation Using Soft Computing Techniques: A Comparative Study
Kumar, M., Bardhan, A., Samui, P., Hu, J. W., & Kaloop, M. R. (2021) · Processes · doi:10.3390/pr9030486 · Cited by 56
Nguyen, V.-T., Tran, T. H., Ha, N., Liêm, N. V., Al-Ansari, N. A., Phong, T. V., Nguyen, H. D., Malek, M. A., Amini, A., Prakash, I., et al. (2019) · Sustainability · doi:10.3390/su11247118 · Cited by 53
Nguyen, M. D., Pham, B. T., Tuyen, T. T., Yen, H. P. H., Prakash, I., Vu, T. T., Chapi, K., Shirzadi, A., Shahabi, H., Dou, J., et al. (2019) · The Open Construction and Building Technology Journal · doi:10.2174/1874836801913010178 · Cited by 49
Evaluating Slope Deformation of Earth Dams Due to Earthquake Shaking Using MARS and GMDH Techniques
Cai, M., Koopialipoor, M., Armaghani, D. J., & Pham, B. T. (2020) · Applied Sciences · doi:10.3390/app10041486 · Cited by 48
Samara, S., & Natsheh, E. M. (2020) · Sustainability · doi:10.3390/su12052011 · Cited by 40
Application of Tribological Artificial Neural Networks in Machine Elements
Walker, J., Questa, H., Raman, A., Ahmed, M., Mohammadpour, M., Bewsher, S. R., & Offner, G. (2023) · Tribology Letters · doi:10.1007/s11249-022-01673-5 · Cited by 39
“Following these initial studies, they were successfully applied to the prediction of the coefficient of friction and wear rate of composite materials [14–16] and tool steels [17] to aid component design.”
MethodInfluentialStochastic fractal search-tuned ANFIS model to predict blast-induced air overpressure
Ye, J., Dalle, J., Nezami, R., Hasanipanah, M., & Armaghani, D. J. (2020) · Engineering With Computers · doi:10.1007/s00366-020-01085-w · Cited by 36
Radhika, N., Krishna, S. A., Basak, A. K., & Adediran, A. A. (2024) · Scientific Reports · doi:10.1038/s41598-024-54267-7 · Cited by 33
Development of a Group Method of Data Handling Technique to Forecast Iron Ore Price
Li, D., Moghaddam, M. R., Monjezi, M., Armaghani, D. J., & Mehrdanesh, A. (2020) · Applied Sciences · doi:10.3390/app10072364 · Cited by 32
Wei, W., Li, X., Liu, J., Zhou, Y., Lü, L., & Zhou, J. (2021) · Applied Sciences · doi:10.3390/app11041922 · Cited by 33
Li, G., Kumar, D., Samui, P., Rad, H. N., Roy, B., & Hasanipanah, M. (2020) · Applied Sciences · doi:10.3390/app10020434 · Cited by 28
Artificial neural network modeling of sliding wear
Argatov, I., & Chai, Y. S. (2020) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/1350650120925582 · Cited by 28
“11 In particular, a number of studies 12,13 have employed neural networks for analysis of wear tests.”
BackgroundInvestigation of effective geometrical parameters on wear of hot forging die
Davoudi, M., Nejad, A. F., Koloor, S. S. R., & Petrů, M. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.10.093 · Cited by 27
Borgaonkar, A. V., & Ismail, S. (2022) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062211065995 · Cited by 17
Peng, K., Amar, M. N., Ouaer, H., Motahari, M. R., & Hasanipanah, M. (2020) · Engineering With Computers · doi:10.1007/s00366-020-01173-x · Cited by 17
Swarm intelligence algorithms for optimising sliding wear of nanocomposites
Fountas, N. A., Kechagias, J. D., & Vaxevanidis, N. M. (2024) · Tribology and Materials · doi:10.46793/tribomat.2024.004 · Cited by 17
Self-citationWear modeling and friction-induced noise: A review
Tian, Y., Khan, M., Yuan, H., & Zheng, B. (2025) · Friction · doi:10.26599/frict.2025.9441124 · Cited by 12
Natsheh, E. M., & Samara, S. (2019) · Applied Sciences · doi:10.3390/app9183670 · Cited by 11
Fault causes and its detection in standalone PV system using ANN and GEO technique
Ganesh, R. J., & Muralidharan, S. (2024) · ISA Transactions · doi:10.1016/j.isatra.2024.06.030 · Cited by 7
An Introduction to Wear Degradation Mechanisms of Surface-Protected Metallic Components
Psyllaki, P. P. (2019) · Metals · doi:10.3390/met9101057 · Cited by 7
“Since it is rather costly and time-consuming to t st experimentally material before proposi it s the suitable one for a specific application, the development of a w ll-structured artificial neural network (ANN) can provide wear maps th t pr dict the areas of saf application [20] or areas of wear mechanism alteration […”
BackgroundSelf-citationLe, T.-H., Nguyen, H.-L., Pham, C.-T., Hoang, H.-G. T., & Nguyen, T. (2021) · Lecture notes in civil engineering · doi:10.1007/978-981-16-7160-9_181 · Cited by 6
Vargas, F., Fé-Perdomo, I. L., Ramos-Grez, J. A., & Navarrete, I. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e04741 · Cited by 4
Li, J., Sun, F., & Li, M. (2022) · Computational Intelligence and Neuroscience · doi:10.1155/2022/7665954 · Cited by 5
“e existence of digital nance overcomes the constraint of diminishing marginal returns to factors and makes long-term economic growth possible [8, 9].”
BackgroundRetractedInterpretable machine learning model for forecasting compressive strength of aeolian sand concrete
Chen, Y., Fu, Q., & Zheng, W. (2025) · Frontiers of Structural and Civil Engineering · doi:10.1007/s11709-025-1227-y · Cited by 3
Zhang, T., Ji, H., Zhang, J., Du, L., Zhang, Y., & Jiao, W. (2025) · Engineering Reports · doi:10.1002/eng2.70170 · Cited by 3
Wu, Y., Yang, L., Wu, W., & Xu, T. (2020) · Applied Sciences · doi:10.3390/app10051634 · Cited by 3
Donevski, D., Tomašegović, T., & Poljaček, S. M. (2023) · Machines · doi:10.3390/machines11060618 · Cited by 2
“In [20], ANNs were used to predict tribological performance of surface treated tool steels.”
MethodRajakumareswaran, V., Chinthamu, N., MURALI, M., & Balaji, D. (2024) · Surface Review and Letters · doi:10.1142/s0218625x24300077 · Cited by 1
Micro arc discharge surface treatment on BO1 steel
Abela, S. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.07.038 · Cited by 1
AI and ML Techniques for Generation and Assessment of Products Properties Data
Vannucci, M., Colla, V., Ritacco, A., Vannocci, M., & Vignali, A. (2021) · Advances in intelligent systems and computing · doi:10.1007/978-3-030-69367-1_6 · Cited by 1
Zhou, J., Wang, Z., Qiu, Y., Li, P., & Tao, M. (2024) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2024.2361859 · Cited by 1
Yang, B. (2025) · Computational Mechanics · doi:10.1007/s00466-025-02657-7 · Cited by 3
“For instance, Cavaleri et al. [16 ] developed a strong artifi - cial neural network (ANN) for tool steel tribological performance prediction.”
Zhou, J., Wang, Z., Li, C., Qiu, Y., & Tao, M. (2023) · Research Square · doi:10.21203/rs.3.rs-3450476/v1 · Cited by 1
Automating the optical identification of abrasive wear on electrical contact pins
Buckermann, F., Klement, N., Beyer, O., Hütten, A., & Hammer, B. (2021) · at - Automatisierungstechnik · doi:10.1515/auto-2021-0021
Hailu, H. N., & Redda, D. T. (2021) · International journal of engineering research in Africa · doi:10.4028/www.scientific.net/jera.56.1
Urgilés, R. W. C., Tanarro, E. C., & Otero, J. (2022) · Congreso Iberoamericano de Ingeniería Mecánica (CIBIM) · doi:10.5944/bicim2022.160 · Cited by 1
“Con respecto a las funciones de transferencia que se encuentran entre capas, las más comunes son de tipo Logsig, Tansig, Elliotsig, y Purelin [22, 23].”
BackgroundBasak, R., Gupta, K. K., Gohil, P. P., Dey, S., & Pandey, K. M. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.02.088
Al-Dulame, A. A., & Al-Kafaji, M. S. S. (2024) · AIP conference proceedings · doi:10.1063/5.0206963
Yang, W., Ji, Y., Meng, X., Gong, S., & Zhou, S. (2025) · Journal of Computational Methods in Sciences and Engineering · doi:10.1177/14727978251385192 · Cited by 2
Predictive Modeling of Wear Behaviour of Ti-8Al-1Mo-1V Aero-Engine Compressor Blade Alloy
Jaipreetha, S., Adhitya, B., Karthikeyan, S., & Angolkar, P. (2026) · Communications in computer and information science · doi:10.1007/978-3-032-20907-8_4
A novel multi-physics-informed CGAN method for predicting TBM disc cutter wear in composite strata
Chang, J.-Q., Huang, H., Yin, Z., Zhang, D., & Zhang, N. (2026) · Tunnelling and Underground Space Technology · doi:10.1016/j.tust.2026.107901
Antibacterial Coatings Based on High-Entropy Materials for Stainless Steel
Mahan, N. K., Krishnan, G., Marjani, M. F. A., & Aziz, M. S. A. (2026) · Engineering materials · doi:10.1007/978-3-032-21001-2_19
Metadata
- Authors
- Cavaleri, L., Asteris, P. G., Psyllaki, P. P., Douvika, M. G., Skentou, A. D., & Vaxevanidis, N. M.
- Affiliations
- University of Palermo (IT)
- School of Pedagogical and Technological Education (GR)
- University of West Attica (GR)
- Corresponding author
- Asteris, Panagiotis G.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2019-07-11
- Volume
- 9
- Issue
- 14
- Pages
- 2788
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W2958666723
- Cited by
- 72
- References
- 82
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 8 · 2023: 4 · 2022: 6 · 2021: 10 · 2020: 23 · 2019: 12
- FWCI
- 4.60
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Applied Sciences (publishedVersion, cc-by)
- Nova Science Publishers (Nova Science Publishers, Inc.) (submittedVersion, other-oa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Universiti Teknologi Malaysia
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Metal Alloys Wear and Properties
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Keywords
- tool steel, surface treatment, nitrocarburizing, tribological properties, artificial neural networks, wear prediction, dry sliding wear, wear maps, pin-on-disc tribometer
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.