Prediction of Surface Treatment Effects on the Tribological Performance of Tool Steels Using Artificial Neural Networks
Open accessThe DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.
Abstract
The present paper discussed the development of a reliable and robust artificial neural network (ANN) capable of predicting the tribological performance of three highly alloyed tool steel grades. Experimental results were obtained by performing plane-contact sliding tests under non-lubrication conditions on a pin-on-disk tribometer. The specimens were tested both in untreated state with different hardening levels, and after surface treatment of nitrocarburizing. We concluded that wear maps via ANN modeling were a user-friendly approach for the presentation of wear-related information, since they easily permitted the determination of areas under steady-state wear that were appropriate for use. Furthermore, the achieved optimum ANN model seemed to be a simple and helpful design/educational tool, which could assist both in educational seminars, as well as in the interpretation of the surface treatment effects on the tribological performance of tool steels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multilayer feedforward networks are universal approximators
Hornik, K., Stinchcombe, M., & White, H. (1989) · Neural Networks · doi:10.1016/0893-6080(89)90020-8 · Cited by 21,728
Multilayer feedforward networks are universal approximators
HornikK., StinchcombeM., & WhiteH. (1989) · Neural Networks · doi:10.5555/70405.70408 · Cited by 9,081
Pattern Recognition and Neural Networks
Ripley, B. D. (1996) · Cambridge University Press eBooks · doi:10.1017/cbo9780511812651 · Cited by 6,459
Bartlett, P. L. (1998) · IEEE Transactions on Information Theory · doi:10.1109/18.661502 · Cited by 1,166 · cited 1×
“There are different activation functions used to train an ANN, such as sigmoidal transfer functions, the logistic sigmoid, and the hyperbolic tangent transfer functions [58,59].”
MethodNeural Networks in Civil Engineering: 1989–2000
Adeli, H. (2001) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/0885-9507.00219 · Cited by 884 · cited 1×
“Useful and detailed state-of-the-art reports can be found in the published research works of Ripley [30] and Adeli [31].”
BackgroundDelen, D., Sharda, R., & Bessonov, M. (2006) · Accident Analysis & Prevention · doi:10.1016/j.aap.2005.06.024 · Cited by 432
Development of hybrid intelligent models for predicting TBM penetration rate in hard rock condition
Armaghani, D. J., Mohamad, E. T., Narayanasamy, M. S., Narita, N., & Yagiz, S. (2017) · Tunnelling and Underground Space Technology · doi:10.1016/j.tust.2016.12.009 · Cited by 416
Armaghani, D. J., Hajihassani, M., Mohamad, E. T., Marto, A., & Noorani, S. A. (2014) · Arabian Journal of Geosciences · doi:10.1007/s12517-013-1174-0 · Cited by 394
Prediction of surface roughness in the end milling machining using Artificial Neural Network
Zain, A. M., Haron, H., & Sharif, S. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2009.07.033 · Cited by 381
Gordan, B., Jahed Armaghani, D., Hajihassani, M., & Monjezi, M. (2016) · Engineering with Computers · doi:10.1007/s00366-015-0400-7 · Cited by 365
Practical Nitriding and Ferritic Nitrocarburizing
Pye, D. (2003) · ASM International eBooks · doi:10.31399/asm.tb.pnfn.9781627083508 · Cited by 340
Sarir, P., Chen, J., Asteris, P. G., Armaghani, D. J., & Tahir, M. M. (2021) · Engineering with Computers · doi:10.1007/s00366-019-00808-y · Cited by 285
Self-citationSelf-compacting concrete strength prediction using surrogate models
Asteris, P. G., & Kolovos, K. G. (2019) · Neural Computing and Applications · doi:10.1007/s00521-017-3007-7 · Cited by 265
Self-citationAsteris, P. G., Tsaris, A. K., Cavaleri, L., Repapis, C. C., Papalou, A., Di Trapani, F., & Karypidis, D. F. (2016) · Computational Intelligence and Neuroscience · doi:10.1155/2016/5104907 · Cited by 243
Self-citationKoopialipoor, M., Jahed Armaghani, D., Hedayat, A., Marto, A., & Gordan, B. (2019) · Soft Computing · doi:10.1007/s00500-018-3253-3 · Cited by 218
Asteris, P. G., & Nikoo, M. (2019) · Neural Computing and Applications · doi:10.1007/s00521-018-03965-1 · Cited by 189
Self-citationFeed-Forward Neural Network Prediction of the Mechanical Properties of Sandcrete Materials
Asteris, P., Roussis, P., & Douvika, M. (2017) · Sensors · doi:10.3390/s17061344 · Cited by 187 · cited 1×
“Architecture of a neuron with a single R‐element input vector [53,56,57].”
BackgroundSelf-citationPrediction of self-compacting concrete strength using artificial neural networks
Asteris, P. G., Kolovos, K. G., Douvika, M. G., & Roinos, K. (2016) · European Journal of Environmental and Civil Engineering · doi:10.1080/19648189.2016.1246693 · Cited by 186
Self-citationPham, B. T., Shirzadi, A., Tien Bui, D., Prakash, I., & Dholakia, M. B. (2018) · International Journal of Sediment Research · doi:10.1016/j.ijsrc.2017.09.008 · Cited by 172
Koopialipoor, M., Fahimifar, A., Ghaleini, E. N., Momenzadeh, M., & Armaghani, D. J. (2020) · Engineering with Computers · doi:10.1007/s00366-019-00701-8 · Cited by 171
Assessing Dynamic Conditions of the Retaining Wall: Developing Two Hybrid Intelligent Models
Chen, H., Asteris, P. G., Armaghani, D. J., Gordan, B., & Pham, B. T. (2019) · Applied Sciences · doi:10.3390/app9061042 · Cited by 152
Self-citationKoopialipoor, M., Nikouei, S. S., Marto, A. B., Fahimifar, A., Armaghani, D. J., & Mohamad, E. T. (2018) · Bulletin of Engineering Geology and the Environment · doi:10.1007/s10064-018-1349-8 · Cited by 151
Application of artificial neural networks for modelling correlations in titanium alloys
Malinov, S., & Sha, W. (2003) · Materials Science and Engineering A · doi:10.1016/j.msea.2003.09.029 · Cited by 146
Krill herd algorithm-based neural network in structural seismic reliability evaluation
Asteris, P. G., Nozhati, S., Nikoo, M., Cavaleri, L., & Nikoo, M. R. (2018) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2018.1430874 · Cited by 140
Self-citationAn optimized ANN model based on genetic algorithm for predicting ripping production
Mohamad, E. T., Faradonbeh, R. S., Armaghani, D. J., Monjezi, M., & Majid, M. Z. A. (2016) · Neural Computing and Applications · doi:10.1007/s00521-016-2359-8 · Cited by 128
Performance of neural networks in materials science
Bhadeshia, H. K. D. H., Dimitriu, R. C., Forsik, S., Pak, J. H., & Ryu, J. H. (2009) · Materials Science and Technology · doi:10.1179/174328408x311053 · Cited by 118
Control of iron nitride layers growth kinetics in the binary Fe-N system
Torchane, L., Bilger, P., Dulcy, J., & Gantois, M. (1996) · Metallurgical and Materials Transactions A · doi:10.1007/bf02651932 · Cited by 118
Incorporation of material behavior in modeling of metal forming and machining processes: A review
Dixit, U. S., Joshi, S. N., & Davim, J. P. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.03.049 · Cited by 117
Pham, B. T., Khosravi, K., & Prakash, I. (2017) · Environmental Processes · doi:10.1007/s40710-017-0248-5 · Cited by 112
Asteris, P. G., Moropoulou, A. I., Skentou, A. D., Apostolopoulou, M., Mohebkhah, A., Cavaleri, L., Rodrigues, H., & Varum, H. (2019) · Applied Sciences · doi:10.3390/app9020243 · Cited by 108
Self-citationA new methodology for optimization and prediction of rate of penetration during drilling operations
Zhao, Y., Noorbakhsh, A., Koopialipoor, M., Azizi, A., & Tahir, M. M. (2019) · Engineering With Computers · doi:10.1007/s00366-019-00715-2 · Cited by 107
Anisotropic masonry failure criterion using artificial neural networks
Asteris, P. G., & Plevris, V. (2016) · Neural Computing and Applications · doi:10.1007/s00521-016-2181-3 · Cited by 104
Self-citationPham, B. T., & Prakash, I. (2017) · Geocarto International · doi:10.1080/10106049.2017.1404141 · Cited by 101
Preliminary Investigation of Neural Network Techniques to Predict Tribological Properties
Jones, S. P., Jansen, R., & Fusaro, R. L. (1997) · Tribology Transactions · doi:10.1080/10402009708983660 · Cited by 97 · cited 1×
“[33] showed the feasibility of using neural networks to predict life data for different material/mechanical systems (rub shoe, pin-on-disk, and four-ball rigs), via the proper selection of input variables that influenced the tribological behavior of each particular system.”
BackgroundPham, B. T., Bui, D. T., Prakash, I., Nguyen, L. H., & Dholakia, M. B. (2017) · Environmental Earth Sciences · doi:10.1007/s12665-017-6689-3 · Cited by 97
Gordan, B., Koopialipoor, M., Clementking, A., Tootoonchi, H., & Mohamad, E. T. (2018) · Engineering With Computers · doi:10.1007/s00366-018-0642-2 · Cited by 91
Masonry Compressive Strength Prediction Using Artificial Neural Networks
Asteris, P. G., Argyropoulos, I., Cavaleri, L., Rodrigues, H., Varum, H., Thomas, J., & Lourenço, P. B. (2019) · Communications in computer and information science · doi:10.1007/978-3-030-12960-6_14 · Cited by 89
Self-citationHayajneh, M., Hassan, A. M., Alrashdan, A., & Mayyas, A. T. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.03.035 · Cited by 83
Liao, X., Khandelwal, M., Yang, H., Koopialipoor, M., & Murlidhar, B. R. (2019) · Engineering With Computers · doi:10.1007/s00366-019-00711-6 · Cited by 83
Koopialipoor, M., Ghaleini, E. N., Tootoonchi, H., Armaghani, D. J., Haghighi, M., & Hedayat, A. (2019) · Environmental Earth Sciences · doi:10.1007/s12665-019-8163-x · Cited by 83
Ly, H., Lü, L., Duong, H. T., Nguyen, T. C., Pham, T. A., Le, T.-T., Le, M. V., Nguyen-Ngoc, L., & Pham, B. T. (2019) · Applied Sciences · doi:10.3390/app9112258 · Cited by 81
Prediction of wear behaviour of A356/SiCp MMCs using neural networks
Rashed, F., & Mahmoud, T. S. (2008) · Tribology International · doi:10.1016/j.triboint.2008.08.010 · Cited by 77
Flood-routing modeling with neural network optimized by social-based algorithm
Nikoo, M., Ramezani, F., Nyarko, E. K., Nyarko, E. K., & Nikoo, M. R. (2016) · Natural Hazards · doi:10.1007/s11069-016-2176-5 · Cited by 75
A Risk-Based Technique to Analyze Flyrock Results Through Rock Engineering System
Hasanipanah, M., Armaghani, D. J., Amnieh, H. B., Koopialipoor, M., & Arab, H. (2018) · Geotechnical and Geological Engineering · doi:10.1007/s10706-018-0459-1 · Cited by 75
Modeling of surface roughness in electro-discharge machining using artificial neural networks
Cavaleri, L., Chatzarakis, G. E., Trapani, F. D., Douvika, M. G., Roinos, K., Vaxevanidis, N. M., & Asteris, P. G. (2017) · PORTO@Iris · doi:10.12989/amr.2017.6.2.169 · Cited by 73
Self-citationPham, B. T., Bui, D. T., Pham, H. V., Le, H. Q., Prakash, I., & Dholakia, M. B. (2016) · Journal of the Indian Society of Remote Sensing · doi:10.1007/s12524-016-0620-3 · Cited by 70
Improvement of wear and corrosion resistances of 17-4PH stainless steel by plasma nitrocarburizing
Liu, R., & Yan, M. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.11.069 · Cited by 60
Friction and rolling–sliding wear of DC-pulsed plasma nitrided AISI 410 martensitic stainless steel
Corengia, P., Walther, F., Ybarra, G., Sommadossi, S., Corbari, R., & Broitman, E. (2005) · Wear · doi:10.1016/j.wear.2005.03.008 · Cited by 59 · cited 1×
“In this context, the performance of nitrocarburized steels has been assessed under sliding [5,19,20], rolling [12], erosion [21], and/or corrosion [22] conditions.”
BackgroundAbrasive wear resistance of TiN/NbN multi-layers: measurement and neural network modelling
Rutherford, K. L., Hatto, P. W., Davies, C., & Hutchings, I. M. (1996) · Surface and Coatings Technology · doi:10.1016/s0257-8972(96)02956-8 · Cited by 57 · cited 1×
“[32] applied the technique to analyze the hardness and abrasive wear resistance of TiN/NbN PVD-deposited multilayers, and correlated them to the specific composition of the thin films.”
MethodStojаnović, B., Vencl, A., Bobić, I., Miladinović, S., & Skerlić, J. (2018) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-018-1237-y · Cited by 57
EVOLVING RBF NEURAL NETWORKS FOR ADAPTIVE SOFT-SENSOR DESIGN
ALEXANDRIDIS, A. (2013) · International Journal of Neural Systems · doi:10.1142/s0129065713500299 · Cited by 51
Surface treatment of tool steels against galling failure
Psyllaki, P. P., Σταματίου, Κ., Iliadis, I., Mourlas, A., Asteris, P. G., & Vaxevanidis, N. M. (2018) · MATEC Web of Conferences · doi:10.1051/matecconf/201818804024 · Cited by 51 · cited 3×
“Detailed and in-depth descriptions can be found in the authors’ recently published work [60].”
BackgroundInfluentialSelf-citationPrediction of the durability of limestone aggregates using computational techniques
Abad, S. V. A. N. K., Yılmaz, M., Armaghani, D. J., & Tuğrul, A. (2016) · Neural Computing and Applications · doi:10.1007/s00521-016-2456-8 · Cited by 47
Erosion and wear behavior of nitrocarburized DC53 tool steel
Wen, D.-C. (2009) · Wear · doi:10.1016/j.wear.2009.10.012 · Cited by 46
Surface hardening of low-alloy 15CrNi6 steel by CO2 laser beam
Katsamas, A. I., & Haidemenopoulos, G. N. (1999) · Surface and Coatings Technology · doi:10.1016/s0257-8972(99)00246-7 · Cited by 46
Microstructure and tribological behaviour of liquid nitrocarburised tool steels
Psyllaki, P. P., Kefalonikas, G., Pantazopoulos, G., Αντωνίου, Σ., & Sideris, J. (2002) · Surface and Coatings Technology · doi:10.1016/s0257-8972(02)00566-2 · Cited by 45 · cited 2×
“However, in several cases, the malfunction of metallic tribosystems can be attributed to different failure causes, such as galling [4], cracking, extensive oxidation, or severe plastic deformation [5], which are associated with improper materials selection for the given application.”
BackgroundSelf-citationModeling of the wear behavior in A356–B4C composites
Shabani, M. O., & Mazahery, A. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-5623-4 · Cited by 45
Optimization of hybrid aluminum composites wear using Taguchi method and artificial neural network
Stojаnović, B., Blagojević, J., Babić, M., Gajević, S., & Miladinović, S. (2017) · Industrial Lubrication and Tribology · doi:10.1108/ilt-02-2017-0043 · Cited by 42 · cited 1×
“[40] combined the Taguchi method and ANN to optimize the percentage of particulate reinforcement of 2024 aluminum alloys that could ensure a minimum wear rate during dry sliding block-on-disc tests.”
MethodPham, B. T., & Prakash, I. (2018) · Indian Journal of Science and Technology · doi:10.17485/ijst/2018/v11i12/99745 · Cited by 42
Parametric optimization of the aluminium nanocomposites wear rate
Gajević, S., Stojаnović, B., Babić, M., Vencl, A., Bobić, I., Bognar, G. V., & Vučetić, F. (2018) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-018-1531-8 · Cited by 42
Determining the Natural Frequency of Cantilever Beams Using ANN and Heuristic Search
Nikoo, M., Hadzima-Nyarko, M., Karlo Nyarko, E., & Nikoo, M. (2018) · Applied Artificial Intelligence · doi:10.1080/08839514.2018.1448003 · Cited by 35
Mirjani, M., Mazrooei, J., Karimzadeh, N., & ASHRAFIZADEH, F. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.04.064 · Cited by 34
Wear behavior of anti-galling surface textured gray cast iron using pulsed-CO2 laser treatment
Pantelis, D. I., Pantazopoulos, G., & Αντωνίου, Σ. (1997) · Wear · doi:10.1016/s0043-1648(96)07339-5 · Cited by 29 · cited 1×
“However, in several cases, the malfunction of metallic tribosystems can be attributed to different failure causes, such as galling [4], cracking, extensive oxidation, or severe plastic deformation [5], which are associated with improper materials selection for the given application.”
BackgroundInfluence of microstructure on the sliding wear behavior of nitrocarburized tool steels
Karamboiki, C.-M., Mourlas, A., Psyllaki, P. P., & Sideris, J. (2013) · Wear · doi:10.1016/j.wear.2013.04.002 · Cited by 25
Self-citationSurface hardening of steel in a solar furnace
Rodríguez, G. P., de Damborenea, J. J., & Vázquez, A. J. (1997) · Surface and Coatings Technology · doi:10.1016/s0257-8972(97)00073-x · Cited by 25
Sliding wear behaviour of a liquid nitrocarburised precipitation-hardening (PH) stainless steel
Pantazopoulos, G., Papazoglou, T., Psyllaki, P. P., Sfantos, G. K., Αντωνίου, Σ., Papadimitriou, K., & Sideris, J. (2004) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2004.01.015 · Cited by 24 · cited 1×
“In this context, the performance of nitrocarburized steels has been assessed under sliding [5,19,20], rolling [12], erosion [21], and/or corrosion [22] conditions.”
BackgroundSelf-citationNikoo, M., Sadowski, Ł., Khademi, F., & Nikoo, M. R. (2017) · Applied Computational Intelligence and Soft Computing · doi:10.1155/2017/3508189 · Cited by 24
Ramesh, R., & Gnanamoorthy, R. (2007) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-007-9100-9 · Cited by 20
Tribological properties of a liquid nitrocarburised special purpose cold work tool steel
Pantazopoulos, G., Psyllaki, P. P., Kanakis, D., Αντωνίου, Σ., Papadimitriou, K., & Sideris, J. (2005) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2005.09.001 · Cited by 20 · cited 1×
“In this context, the performance of nitrocarburized steels has been assessed under sliding [5,19,20], rolling [12], erosion [21], and/or corrosion [22] conditions.”
BackgroundSelf-citationImprovement of resistance to oxidation by laser alloying on a tool steel
Gemelli, E., Gallerie, A., & CAILLET, M. (1998) · Scripta Materialia · doi:10.1016/s1359-6462(98)00329-7 · Cited by 18
Plasma and gaseous nitrocarburizing of C60W steel for tribological applications
Mirjani, M., Shafyei, A., & ASHRAFIZADEH, F. (2008) · Vacuum · doi:10.1016/j.vacuum.2008.12.004 · Cited by 18
Modeling the wear of Polyamide 66 using artificial neural network
Abdelbary, A., Abouelwafa, M. N., Fahham, I. M. E., & Hamdy, A. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.05.013 · Cited by 16 · cited 1×
“[39] developed an ANN architecture for modeling the wear of polyamide 66 during dry sliding, introducing the applied load, the load ratio, the number of surface cracks, the lubricant’s thickness, and the linear wear rate of the material under study as input data.”
MethodPredicting the Shear Strength of RC Beams without Stirrups Using Bayesian Neural Network
Iruansi, O., Guadagnini, M., Pilakoutas, K., & Neocleous, K. (2010) · International Workshop on Reliable Engineering Computing (REC) · doi:10.3850/978-981-08-5118-7_067 · Cited by 12 · cited 1×
“To this aim, it was important to normalize the data within a defined range of appropriate upper and lower limit values, especially considering the fact that the selection of the appropriate limit values could have a highly beneficial effect on the ANNs’ learning rate, as presented by Iruansi [63,64].”
Neural Network Approximation of the Masonry Failure under Biaxial Compressive Stress
Asteris, P. G., & Plevris, V. (2014) · doi:10.7712/130113.4411.s2158 · Cited by 12
Self-citationTool steel ion beam assisted nitrocarburization
Zagonel, L. F., & Alvarez, F. (2007) · Materials Science and Engineering A · doi:10.1016/j.msea.2007.02.048 · Cited by 10
Srinivasan, V., Maheshkumar, K. V., Karthikeyan, R., & Palanikumar, K. (2007) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684407082632 · Cited by 10 · cited 1×
“identify the areas of mild, severe, and ultra-severe wear on a “normalized force”-“normalized velocity” chart produced with the aid of neural networking algorithms [35].”
MethodChen, S., Wood, R. J. K., Wang, L., Callan, R., & Powrie, H. E. G. (2008) · Proceedings of the Institution of Mechanical Engineers Part O Journal of Risk and Reliability · doi:10.1243/1748006xjrr89 · Cited by 10
Failure Mechanisms of an Automobile Clutch Assembly Cast Iron Pressure Plate
Psyllaki, P. P., Pantazopoulos, G., & Karaiskos, P. (2011) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-011-9523-3 · Cited by 6 · cited 1×
“• The clutch assembly, where the clutch disk slides against the pressure plate to disengage power to the drive train, enabling the vehicle to stop, start, or shift gears [2].”
BackgroundSelf-citationPillai, N., Karthikeyan, R., & Davim, J. P. (2018) · Tribology - Materials Surfaces & Interfaces · doi:10.1080/17515831.2018.1437335 · Cited by 6
Cavaleri, L., Chatzarakis, G. E., Trapani, F. D., Douvika, M. G., Foskolos, F., Fotos, A., Giovanis, D. G., Karypidis, D. F., Livieratos, S., Roinos, K., et al. (2016) · PORTO@Iris · Cited by 4
Self-citationTufftriding and Tennifer Surface Treatment
Pantazopoulos, G. (2013) · Springer eBooks · doi:10.1007/978-0-387-92897-5_1169 · Cited by 3
Wear and Degradation Modes in Selected Vehicle Tribosystems
Pantazopoulos, G., Tsolakis, A. D., Psyllaki, P. P., & Vazdirvanidis, A. (2015) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 3
Self-citation
Research works printed but not linked: 3
- Williams, J.A. Engineering Tribology; Oxford University Press: Oxford, UK, 1996.
- Karlik, B.; Olgac, A.V. Performance analysis of various activation functions in generalized MLP architectures of neural networks. Int. J. Artif. Intell. Expert Syst. 2011, 1, 111-122.
- Apostolopoulou, M.; Douvika, M.G.; Kanellopoulos, I.N.; Moropoulou, A.; Asteris, P.G. Prediction of compressive strength of mortars using artificial neural networks. In Proceedings of the 1st International Conference TMM_CH, Transdisciplinary Multispectral Modelling and Cooperation for the Preservation of Cultural Heritage, Athens, Greece, 10-13 October 2018.
Cited by
Duan, J., Asteris, P. G., Nguyen, H., Bui, X.-N., & Moayedi, H. (2021) · Engineering with Computers · doi:10.1007/s00366-020-01003-0 · Cited by 357
Self-citationDao, D. V., Adeli, H., Ly, H.-B., Le, L. M., Le, V. M., Le, T.-T., & Pham, B. T. (2020) · Sustainability · doi:10.3390/su12030830 · Cited by 233
The Use of Artificial Intelligence in Tribology—A Perspective
Rosenkranz, A., Marian, M., Profito, F. J., Aragon, N., & Shah, R. (2020) · Lubricants · doi:10.3390/lubricants9010002 · Cited by 187
Harandizadeh, H., Armaghani, D. J., & Khari, M. (2019) · Engineering With Computers · doi:10.1007/s00366-019-00849-3 · Cited by 143
Soft computing-based models for the prediction of masonry compressive strength
Asteris, P. G., Lourenço, P. B., Hajihassani, M., Adami, C.-E., Lemonis, M. E., Skentou, A. D., Marques, R. F. P., Nguyen, H., Rodrigues, H., & Varum, H. (2021) · Engineering Structures · doi:10.1016/j.engstruct.2021.113276 · Cited by 134
Self-citation
Metadata
- Authors
- Cavaleri, L., Asteris, P. G., Psyllaki, P. P., Douvika, M. G., Skentou, A. D., & Vaxevanidis, N. M.
- Affiliations
- University of Palermo (IT)
- School of Pedagogical and Technological Education (GR)
- University of West Attica (GR)
- Corresponding author
- Asteris, Panagiotis G.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2019-07-11
- Volume
- 9
- Issue
- 14
- Pages
- 2788
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W2958666723
- Cited by
- 72
- References
- 82
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 8 · 2023: 4 · 2022: 6 · 2021: 10 · 2020: 23 · 2019: 12
- FWCI
- 4.60
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Applied Sciences (publishedVersion, cc-by)
- Nova Science Publishers (Nova Science Publishers, Inc.) (submittedVersion, other-oa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Universiti Teknologi Malaysia
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Metal Alloys Wear and Properties
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Keywords
- tool steel, surface treatment, nitrocarburizing, tribological properties, artificial neural networks, wear prediction, dry sliding wear, wear maps, pin-on-disc tribometer
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.