CubeSat Mission: From Design to Operation
Open accessThe DOI matches its Crossref record; 36 of the 37 references it cites were found in a registry or an index; none of the 16 sources its claims cite is checked for support yet.
Abstract
The current success rate of CubeSat missions, particularly for first-time developers, may discourage non-profit organizations to start new projects. CubeSat development teams may not be able to dedicate the resources that are necessary to maintain Quality Assurance as it is performed for the reliable conventional satellite projects. This paper discusses the structured life-cycle of a CubeSat project, using as a reference the authors’ recent experience of developing and operating a 2U CubeSat, called qbee50-LTU-OC, as part of the QB50 mission. This paper also provides a critique of some of the current poor practices and methodologies while carrying out CubeSat projects.
Overview
CoChat Summary
TL;DR
This paper presents a structured life-cycle account of a 2U CubeSat mission, qbee50-LTU-OC (SE01), from project initiation through fabrication, testing, delivery, and operations as part of the QB50 mission. It uses that experience to critique common CubeSat practices and highlight quality-assurance, testing, and operational lessons for prospective developers.
Key findings
- University-led CubeSats have an early failure rate around 48%, and CubeSats in LEO at 400 km typically decay to reentry within one to two years.
- The SE01 2U CubeSat had a total mass of 1900 g, below the QB50 limit of 2000 g and the 2U CubeSat Specification limit of 2660 g; it carried the FIPEX primary payload and the OC-OBC secondary payload.
- SE01 launched on 18 April 2017 with 27 other QB50 satellites on an Atlas-V to the ISS, was deployed on 17 May, operated for nearly one year, and reentered on 26 February 2019.
- Thermal-vacuum bake-out at 50 °C and 1 × 10⁻⁵ mbar for 3 h caused only 2 g mass loss, less than 1% of total mass; random vibration applied 8.03 g RMS for 120 s per axis, with 9.30 g RMS actually experienced.
Methods
- The paper is an experience-based case study and critique, using the authors’ development and operation of the SE01 CubeSat as a reference mission within the QB50 constellation.
- It follows the project life cycle across initiation, contracts and timeline, registration and frequency allocation, QA and documentation, facilities, fabrication and integration, verification and validation, delivery, and operations.
- Reported data include mission budgets, test conditions and results, link-budget values, power-budget values, and operational timelines from the SE01 mission.
Limitations
- The paper states that ESA’s QA standard is mainly tailored to conventional space missions and that even partial implementation can improve CubeSat success rates, but applying it can create notable documentation burdens for small teams.
- The paper notes that some tests or conditions were constrained, e.g., the shock test was waived because SE01 was a proto-flight model, and thermal-vacuum cycling included long constant-temperature periods at 25 °C due to operator unavailability overnight.
- Evident from the text: the findings are drawn from a single 2U CubeSat mission and are presented as a reference and critique rather than a comparative or statistically generalizable study.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 8 Not valid · 14 Not checked · 55 Own results and interpretations
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In case of SE01, a root-mean-square acceleration of 8.03 g was applied during 120 s for each axis.”
plainSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 3 assumptions not shown here.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The results of a sine vibration test with QAT performed on one axis of SE01, shown in Figure 12, illustrate how the response of the satellite increases as it approaches the natural frequency.”
plainstates a causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 2 assumptions not shown here.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The SE01 CubeSat remained for 3 h in a bake-out chamber (Figure 14), with a controlled environment at 50 °C and 1 × 10 -5 mbar.”
plainSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The average power generated by the SE01's solar panels in the worst case is 2600 mW.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The typical voltage of the battery pack is 7.4 V, and it has a capacity of 2600 mAh.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
21 more claims
Create a free account to see all 77 claims and to verify the 9 references still open.
- It may state two separate claims as one. 16
- Probably not a substantial claim. 46
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 4. Verification and Validation
“For the SE01 CubeSat, the reference document that was used to design the test campaign was the QB50 requirements document [30].”
§ References
“30. Nolan, G. Test Driven Development. In Agile Swift: Swift Programming Using Agile Tools and Techniques , 1st ed.; Apress: New York, NY, USA, 2017; pp. 131-167. [CrossRef]”
Citations
Cites
A hierarchical model for object-oriented design quality assessment
Bansiya, J., & Davis, C. G. (2002) · IEEE Transactions on Software Engineering · doi:10.1109/32.979986 · Cited by 1,020
A hierarchical model for object-oriented design quality assessment
Gupta, N., Goyal, D., & Goyal, M. (2015) · International Journal of Advances in Engineering Sciences (RG Journals of Scientific Research) · Cited by 660
(2000) · Digital Commons - USU (Utah State University) · Cited by 453
NanoSail-D: A solar sail demonstration mission
Johnson, L., Whorton, M., Heaton, A., Pinson, R., Laue, G., & Adams, C. (2011) · Acta Astronautica · doi:10.1016/j.actaastro.2010.02.008 · Cited by 345
(2013) · Cited by 197
CubeSat: The Pico-Satellite Standard for Research and Education
Chin, A., Coelho, R., Nugent, R., Munakata, R., & Puig-Suari, J. (2008) · AIAA SPACE 2008 Conference & Exposition · doi:10.2514/6.2008-7734 · Cited by 158 · cited 4×
“To mention a few, the originators of the CubeSat concept from CalPoly have given an overview of the CubeSat Specifications [6].”
MethodInfluentialThe CubeSat Approach to Space Access
Toorian, A., Diaz, K., & Lee, S. (2008) · 2008 IEEE Aerospace Conference · doi:10.1109/aero.2008.4526293 · Cited by 150
3Cat-2—An Experimental Nanosatellite for GNSS-R Earth Observation: Mission Concept and Analysis
Carreno-Luengo, H., Camps, A., Via, P., Munoz, J. F., Cortiella, A., Vidal, D., Jane, J., Catarino, N., Hagenfeldt, M., Palomo, P., et al. (2016) · IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing · doi:10.1109/jstars.2016.2574717 · Cited by 74
OpenOrbiter: A Low-Cost, Educational Prototype CubeSat Mission Architecture
Straub, J., Korvald, C., Nervold, A., Mohammad, A. F., Root, N., Long, N., & Torgerson, D. (2013) · Machines · doi:10.3390/mach1010001 · Cited by 73
Standardization and the costs of assessing quality
Jones, P., & Hudson, J. (1996) · European Journal of Political Economy · doi:10.1016/0176-2680(95)00021-6 · Cited by 65
Research works printed but not linked: 3
- 13. Bach, C.; Pellegrino, A.; Di Battista, R.; Toson, E. Importance and challenges of hands-on experience in astronautical education. In Proceedings of the International Astronautical Congress, Guadalajara, Mexico, 26-30 September 2016.
- 39. National Academies of Sciences, Engineering, and Medicine. Achieving Science with CubeSats: Thinking Inside the Box ; National Academies of Sciences, Engineering, and Medicine: Washington, DC, USA, 2016. [CrossRef]
- 50. Verma, A.; Duann, Y.; Boyajian, S. INSPIRESat-1 Nanosat Mission. In Proceedings of the AIAA / USU Conference on Small Satellites, Logan, UT, USA, 4-9 August 2018.
Cited by
Multiband Reconfigurable Antennas for 5G Wireless and CubeSat Applications: A Review
Ramahatla, K., Mosalaosi, M., Yahya, A., & Basutli, B. (2022) · IEEE Access · doi:10.1109/access.2022.3166223 · Cited by 92
Improving CubeSat reliability: Subsystem redundancy or improved testing?
Bouwmeester, J., Menicucci, A., & Gill, E. K. A. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.108288 · Cited by 76
A community-driven approach to democratize access to satellite ground stations
Singh, V. K., Prabhakara, A., Zhang, D., Yağan, O., & Kumar, S. (2021) · ACM Annual International Conference on Mobile Computing and Networking (MobiCom) · doi:10.1145/3447993.3448630 · Cited by 37
Testing Lab-on-a-Chip Technology for Culturing Human Melanoma Cells under Simulated Microgravity
Przystupski, D., Górska, A., Michel, O., Podwin, A., Śniadek, P., Łapczyński, R., Saczko, J., & Kulbacka, J. (2021) · Cancers · doi:10.3390/cancers13030402 · Cited by 29
Spiridonov, A. A., Saetchnikov, V. A., Ушаков, Д. В., Cherny, V. E., & Kezik, A. G. (2020) · IEEE Journal on Miniaturization for Air and Space Systems · doi:10.1109/jmass.2020.3047456 · Cited by 28
Khan, O., Moursi, M. S. E., Zeineldin, H. H., Khadkikar, V., & Hosani, M. A. (2020) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2020.0225 · Cited by 24
Kerrouche, K. D. E., Seddjar, A., Khorchef, N., Bendoukha, S. A., Wang, L., & Aoudeche, A. (2022) · Automatika · doi:10.1080/00051144.2022.2065420 · Cited by 21
“In the preliminary phases of a satellite project, experts in each of the space areas come from, for example, the ESA Concurrent Design Facilities (CDF), CNES, Airbus Defense and Space, to supervise students at a limited time for the development of a feasibility phase of space missions [17–19].”
Thermal Vacuum Test Campaign of the EIRSAT-1 Engineering Qualification Model
Dunwoody, R., Reilly, J. D., Murphy, D., Doyle, M., Thompson, J., Finneran, G., Salmon, L., O’Toole, C., Akarapu, S. K. R., Erkal, J., et al. (2022) · Aerospace · doi:10.3390/aerospace9020099 · Cited by 27
Latachi, I., Rachidi, T., Karim, M., & Hanafi, A. (2020) · Aerospace · doi:10.3390/aerospace7100146 · Cited by 26
Alandihallaj, M. A., & Hein, A. M. (2024) · Acta Astronautica · doi:10.1016/j.actaastro.2024.06.050 · Cited by 20
Multiband circularly polarised CubeSat antenna operating in S, C, X, Ku, K, and Ka bands
Elkady, H. M., Abdullah, H. H., & Darwish, S. M. (2023) · IET Microwaves Antennas & Propagation · doi:10.1049/mia2.12444 · Cited by 20
Research on Design, Simulation, and Experiment of Separation Mechanism for Micro-Nano Satellites
Zhao, X., Zhao, C., Li, J., Guan, Y., Chen, S., & Zhang, L. (2022) · Applied Sciences · doi:10.3390/app12125997 · Cited by 14
Performance Comparison of Quantized Control Synthesis Methods of Antenna Arrays
Pánek, D., Orosz, T., Karban, P., Gnawa, D. C. D., & Neghab, H. K. (2022) · Electronics · doi:10.3390/electronics11070994 · Cited by 13
Olave, D. R., Jara, N. C., Palharini, R. C., Palharini, R. S. A., Gaglio, E., & Savino, R. (2023) · Aerospace Science and Technology · doi:10.1016/j.ast.2023.108358 · Cited by 14
Spiridonov, A. A., Kesik, A. G., Саечников, В. А., Cherny, V. E., & Ушаков, Д. В. (2020) · Moscow University Physics Bulletin · doi:10.3103/s0027134920050203 · Cited by 11
Almalki, F. A., & Soufiene, B. O. (2021) · Mobile Information Systems · doi:10.1155/2021/1827155 · Cited by 11
In-Orbit Results and Attitude Analysis of the SNUGLITE Cube-Satellite
Kim, O.-J., Shim, H., Yu, S., Bae, Y., Kee, C., Kim, H., Lee, J., Han, J., Han, S., & Choi, Y. (2020) · Applied Sciences · doi:10.3390/app10072507 · Cited by 8
“The CubeSat platform allows students to conceive, design, implement, test, and operate a complete spacecraft in space, often using commercial off-the-shelf (COTS) components for educational purposes [2,3], and it also allows developers to test payloads and platforms in orbit at a reasonable price.”
BackgroundDeep Reinforcement Learning for Multi-Phase Microstructure Design
Yang, J., Harish, S., Li, C., Zhao, H., Antous, B., & Acar, P. (2021) · Computers, materials & continua/Computers, materials & continua (Print) · doi:10.32604/cmc.2021.016829 · Cited by 8
Effects of cathode operating parameters on the ignition voltage threshold of Hall thrusters
Li, W., Li, H., Ding, Y., Wei, L., Yang, X., Cai, H., Jian-ning, S., & Yu, D. (2020) · Vacuum · doi:10.1016/j.vacuum.2020.109169 · Cited by 8
Ferreira, A. A., Borges, R. A., Reis, L. R., Borries, C., & Vasylyev, D. (2022) · IEEE Access · doi:10.1109/access.2022.3183152 · Cited by 11
Bifurcation of a liquid micro-jet in a vacuum
(2022) · doi:10.1016/j.vacuum.2022.110904 · Cited by 7
Small Satellite Orbit Determination Using The University Ground Station
Spiridonov, A. A., Саечников, В. А., Ушаков, Д. В., Cherny, V. E., & Kezik, A. G. (2020) · IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace) · doi:10.1109/metroaerospace48742.2020.9160009 · Cited by 12
Low-cost Test System for 1U CubeSat Attitude Control with Reaction Wheels
Yanyachi, P. R., Mamani-Valencia, H., & Espinoza-García, B. (2022) · IEEE Biennial Congress of Argentina (ARGENCON) · doi:10.1109/argencon55245.2022.9940099 · Cited by 7
Hestad, T., Barabash, V., & Laufer, R. (2023) · Advances in Space Research · doi:10.1016/j.asr.2023.06.024 · Cited by 7
A Study on Quantum Key Distribution Satellite Communications
Lauterbach, F., Vanëk, M., Mehić, M., & Vozn̆ák, M. (2023) · International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT) · doi:10.1109/icumt61075.2023.10333106 · Cited by 10
Application of Nanosatellites for Lunar Missions
Bellome, A., Gutierrez, A. N., Prous, G. Z., Leng, L., Coyle, M., D'souza, S., Mummigatti, S., & Serfontein, Z. (2021) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero50100.2021.9438417 · Cited by 6
Single event latch-up detection for nano-satellite external solar radiation mitigation system
Ya’acob, N., Ayob, M. F., Tajudin, N., Kassim, M. B., & Yusof, A. L. (2020) · Bulletin of Electrical Engineering and Informatics · doi:10.11591/eei.v10i1.2488 · Cited by 6
Investigation of thermal management strategies for biological CubeSat payloads
Kil, J., Kim, S., & Pak, J. J. (2024) · Acta Astronautica · doi:10.1016/j.actaastro.2024.11.059 · Cited by 5
Design and manufacture of CubeSat-type nanosatellite thermal subsystem
Peraza-Acosta, B., Grageda-Arellano, J. I., Couder-Castañeda, C., Meléndez-Martínez, J., Padilla-Pérez, D. A., & Solís-Santomé, A. (2025) · Scientific Reports · doi:10.1038/s41598-025-86688-3 · Cited by 4
GREATCUBE+: conceptual design tool for CubeSat’s design
Girardello, C., Tajmar, M., & Scharlemann, C. (2023) · CEAS Space Journal · doi:10.1007/s12567-023-00509-9 · Cited by 6
Dunwoody, R., Doyle, M., Murphy, D., Finneran, G., O’Callaghan, D., Reilly, J. D., Thompson, J., Akarapu, S. K. R., de Barra, C., Cotter, L., et al. (2023) · Journal of Astronomical Telescopes Instruments and Systems · doi:10.1117/1.jatis.9.3.037001 · Cited by 4
Fabrication and Database Management of Cubesat
(2024) · doi:10.1109/sceecs61402.2024.10482146 · Cited by 3
Development of Piezoelectric Inertial Rotary Motor for Free-Space Optical Communication Systems
Šišovas, L., Čeponis, A., Mažeika, D., & Borodinas, S. (2024) · Micromachines · doi:10.3390/mi15121495 · Cited by 3
Preliminary Study of an In-Space Wireless Power Transmission for CubeSats
Gok, A. B., Masotti, D., & Costanzo, A. (2023) · IEEE International Conference on Wireless for Space and Extreme Environments (WiSEE) · doi:10.1109/wisee58383.2023.10289210 · Cited by 3
Low Profile UHF Antenna Design for Low Earth-Observation CubeSats
Ullah, M. A., Alam, T., Almutairi, A. F., & Islam, M. T. (2021) · Computers, materials & continua/Computers, materials & continua (Print) · doi:10.32604/cmc.2022.021852 · Cited by 3
Preliminary study on diffuse OWC for intra-CubeSat Communication
Ertunc, E., Messa, A., Gilli, L., Cossu, G., Rannello, M., & Ciaramella, E. (2020) · Italian Conference on Optics and Photonics (ICOP) · doi:10.1109/icop49690.2020.9300309 · Cited by 3
Learning Constrained Corner Node Trajectories of a Tether Net System for Space Debris Capture
Liu, F., Boonrath, A., KrisshnaKumar, P., Botta, E. M., & Chowdhury, S. (2023) · AIAA AVIATION Forum · doi:10.2514/6.2023-3920 · Cited by 5
Online fault tolerant energy-aware algorithm for CubeSats
Dobiáš, P., Casseau, E., & Sinnen, O. (2023) · Sustainable Computing Informatics and Systems · doi:10.1016/j.suscom.2023.100853 · Cited by 3
Improving Data Throughput of CubeSats Through Variable Power Modulation
Mahmood, A. A., & Marpu, P. (2024) · IEEE Journal on Miniaturization for Air and Space Systems · doi:10.1109/jmass.2024.3355754 · Cited by 5
Structural and Thermal Analysis of a CubeSat
Aswin, M., Pavithran, A., Mangrole, Y., & Ravi, B. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-981-99-1665-8_32 · Cited by 4
Registration the outflow of liquid jet from capillary into vacuum
(2021) · doi:10.1063/5.0052024 · Cited by 2
Adaptable O-Board Computer for Nanosatellites
(2022) · doi:10.1109/uemcon54665.2022.9965674 · Cited by 2
Mission Design Review for 1U ASEANSAT Nanosatellite
Ali, F. Z., Jusoh, M. H., & Ilagan, L. C. (2023) · IEEE Malaysia International Conference on Communications (MICC) · doi:10.1109/micc59384.2023.10419435 · Cited by 2
Design, Material Selection and Manufacture of Cubesat Based on Solidworks Software
Zhang, L. (2023) · Lecture notes in electrical engineering · doi:10.1007/978-981-99-1428-9_28 · Cited by 1
Towards Space Sensor Network and Internet of Things: Merging CubeSats with IoT
Koulouris, C., Piromalis, D. D., Al‐Darraji, I., Tsaramirsis, G., Khadidos, A. O., Khadidos, A. O., & Papageorgas, P. G. (2023) · Lecture notes in electrical engineering · doi:10.1007/978-981-99-4795-9_9 · Cited by 2
Yaskin, A. S., Зарвин, A. Е., Kalyada, V. V., Dubrovin, K. A., & Khudozhitkov, V. E. (2024) · Instruments and Experimental Techniques · doi:10.1134/s002044122470060x · Cited by 1
High-Fidelity Simulation of a Pico Satellite Link
(2022) · doi:10.1109/sharc53093.2022.9720016 · Cited by 1
Comparison of Simulated and Measured Power of the Earth-Space Link for Satellite-Based AIS Signals
Dong, X., Yuan, Z., Sun, F., Zhu, Q., Sun, M., & Zhu, P. (2023) · Sensors · doi:10.3390/s23156740 · Cited by 2
Space Pharmaceutical Manufacturing: Emergence of a New Era for Pharmaceutical Industry
Patel, M., Naphade, A., & Mehta, P. (2025) · Drug Development Research · doi:10.1002/ddr.70145 · Cited by 2
Abbasy, M., & Motaaleghi, M. A. (2023) · Advances in Astronautics Science and Technology · doi:10.1007/s42423-023-00137-9 · Cited by 2
A Systematic Approach for Cubesat Mission Risk Analysis
Latachi, I., Rachidi, T., & Karim, M. (2024) · International Conference on Global Aeronautical Engineering and Satellite Technology (GAST) · doi:10.1109/gast60528.2024.10520794 · Cited by 2
Spiridonov, A. A., Саечников, В. А., Ушаков, Д. В., Kezik, A. G., Cherny, V. E., Verstakovskaya, A. P., & Evchik, V. Е. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/966/1/012104 · Cited by 2
Engineering Model of Single Channel AIS Receiver Payload for Cubesat
Prasetya, M. I., Wirawan, I. P. G. R., Edwar, E., Priramadhi, R. A., Zulkarnaen, D. A., Fathurrahman, M. F., Risnando, A., & Widiawan, A. K. (2024) · International Conference on Information Technology, Computer, and Electrical Engineering · doi:10.1109/icitacee62763.2024.10762772 · Cited by 2
Ground Level Studies: Triad Spectroscopy Interface for the Jnanam CubeSat
Kulkarni, S. P., Venkatesan, J., Kuppusamy, G., Anshad, P. A., Gnaneswar, D., Pachiyappan, J. K., Jeyaprakash, M. R., Karri, V. V. S. R., & Roychowdhury, P. (2024) · IEEE Space, Aerospace and Defence Conference (SPACE) · doi:10.1109/space63117.2024.10667926 · Cited by 1
Herman, T., Kazi, K., & Dudás, L. (2025) · IEEE Journal on Miniaturization for Air and Space Systems · doi:10.1109/jmass.2025.3637574
Real-Time Responsiveness and Communication Validation Platform for CubeSats
Essetty, A., Belali, F., Daghouri, A., Bah, S., & Guennoun, Z. (2026) · IEEE Journal on Miniaturization for Air and Space Systems · doi:10.1109/jmass.2026.3671105
de Souza, A. B., & Montenegro, E. D. (2022) · Revista Innovación y Desarrollo Sostenible · doi:10.47185/27113760.v3n1.82
Яскин, А. С., Зарвин, A. Е., Каляда, В. В., Dubrovin, K. A., & Khudozhitkov, V. E. (2024) · Instruments and Experimental Techniques · doi:10.31857/s0032816224020258
Development of a CubeSat Conceptual Design Tool and Implementation of the EPS Design Module
Nogrady, S. K. (2021) · DigitalCommons - CalPoly (California State Polytechnic University) · doi:10.15368/theses.2021.92
Combining models of synchronizing physical and digital processes in small spacecraft manufacturing
Bobryshov, A. P., Kuzmenko, V. P., Рысин, А. В., & Solyonaya, O. Y. (2026) · Известия высших учебных заведений. Приборостроение · doi:10.17586/0021-3454-2026-69-6-555-564
Análisis de los modos de fallo del sistema de gestión de energía de un Cubesat
Aybar-Mejía, M., Santos, L. H. D. L., Peñaló, D. D. R., Sánchez, E. R., & Mariano-Hernández, D. (2021) · Ciencia Ingenierías y Aplicaciones · doi:10.22206/cyap.2021.v4i2.pp5-2 · Cited by 1
Orbit Estimation Technology for the Initial Phases of a Nanosatellite Mission
Spiridonov, A. A., Baranova, V., Cherny, V. E., Semenovich, S., Ушаков, Д. В., & Saetchnikov, V. A. (2024) · IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace) · doi:10.1109/metroaerospace61015.2024.10591583 · Cited by 3
Delgado-Martínez, J. A., & Muñoz-Giraldo, S. (2023) · Ingenieria y Universidad · doi:10.11144/javeriana.iued27.doof
Analysis of Methods for CubeSat Mission Design Based on in-orbit Results of KRAKsat Mission
Musiał, A., Markowski, D., Życzkowski, J., & Cyran, K. A. (2021) · International Journal of Education and Information Technologies · doi:10.46300/9109.2021.15.31
García-Luis, U., Navarro-Medina, F., Ulloa, C., Gómez-San-Juan, A., Rey, G., Pires, A. L., Maia, M., Rocha, M., & Agelet, F. A. (2023) · CEAS Space Journal · doi:10.1007/s12567-023-00528-6
Dynamic frequency scheduling for CubeSat's on-board and data handling subsystem
Sabri, S. F., Ahmad, N. A., Sahibuddin, S., & Dziyauddin, R. A. (2021) · Indonesian Journal of Electrical Engineering and Computer Science · doi:10.11591/ijeecs.v22.i3.pp1672-1678 · Cited by 1
Takalkar, A., Devalkar, R., Kharche, S., & Lakshmisudha, K. (2026) · Progress In Electromagnetics Research C · doi:10.2528/pierc26033102
Dunwoody, R., Murphy, D., Uliyanov, A., Mangan, J., Doyle, M., Thompson, J., de Barra, C., Hanlon, L., McKeown, D. J., Shortt, B., et al. (2024) · Aerospace · doi:10.3390/aerospace11070578 · Cited by 2
Online fault tolerant task scheduling for real-time multiprocessor embedded systems
Dobiáš, P. (2020) · theses.fr (ABES) · doi:10.70675/03b420b8zd698z4170z83bdzcd413d76d73b · Cited by 4
Kamilah, K., Ismail, A. G., Firdaus, A., Sugianto, S., Rizki, O., Syahriza, R., & Purnami, S. (2025) · International Journal of Accounting and Economics Studies · doi:10.14419/eee8ba50
Metadata
- Authors
- Nieto-Peroy, C., & Emami, M. R.
- Affiliations
- Onboard Space Systems Group, Department of Computer Science, Electrical and Space Engineering, Luleå University of Technology, Space Campus, 981 92 Kiruna, Sweden
- University of Toronto (CA)
- Corresponding author
- Emami, M. Reza
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2019-08-01
- Volume
- 9
- Issue
- 15
- Pages
- 3110
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W2965366524
- Semantic Scholar
- 97d771d055f267cb792fc7a4e080cbbd5a4131eb
- Cited by
- 103
- References
- 37
- Citations by year
- 2026: 11 · 2025: 9 · 2024: 15 · 2023: 19 · 2022: 19 · 2021: 18 · 2020: 12
- FWCI
- 9.01
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Applied Sciences (publishedVersion, cc-by)
- TSpace (University of Toronto) (submittedVersion, other-oa)
- Diva portal (Dalarna University Library) (submittedVersion, other-oa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Aerospace Engineering › Spacecraft Design and Technology
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Space Technology and Applications
- Physical Sciences › Engineering › Aerospace Engineering › Space Satellite Systems and Control
- Keywords
- CubeSat, quality assurance, mission operations
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.