Development of a Fast Running Equivalent Circuit Model with Thermal Predictions for Battery Management Applications
Open accessThe DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
Equivalent circuit modelling (ECM) is a powerful tool to study the dynamic and non-linear characteristics of Li-ion cells and is widely used for the development of the battery management system (BMS) of electric vehicles. The dynamic parameters described by the ECM are used by the BMS to estimate the battery state of charge (SOC), which is crucial for efficient charging/discharging, range calculations, and the overall safe operation of electric vehicles. Typically, the ECM approach represents the dynamic characteristics of the battery in a mathematical form with a limited number of unknown parameters. Then, the parameters are calculated from voltage and current information of the lithium-ion cell obtained from controlled experiments. In the current work, a faster and simplified first-order resistance–capacitance (RC) equivalent circuit model was developed for a commercial cylindrical cell (LGM50 21700). An analytical solution was developed for the equivalent circuit model incorporating SOC and temperature-dependent RC parameters. The solution to the RC circuit model was derived using multiple expressions for different components like open circuit voltage (OCV), instantaneous resistance (R0), and diffusional parameters (R1 and C1) as a function of the SOC and operating temperature. The derived parameters were validated against the virtual HPPC test results of a validated physics-based electrochemical model for the voltage behavior. Using the developed RC circuit model, a polynomial expression is derived to estimate the temperature increase of the cell including both irreversible and reversible heat generation components. The temperature predicted by the proposed RC circuit model at different battery operating temperatures is in good agreement with the values obtained from the validated physics model. The developed method can find applications in (i) onboard energy management by the BMS and (ii) quicker evaluation of cell performance early in the product development cycle.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.033 · Cited by 1,768
Critical Review on the Battery State of Charge Estimation Methods for Electric Vehicles
Xiong, R., Cao, J., Yu, Q., He, H., & Sun, F. (2018) · IEEE Access · doi:10.1109/access.2017.2780258 · Cited by 1,004
Chen, C.-H., Brosa Planella, F., O’Regan, K., Gastol, D., Widanage, W. D., & Kendrick, E. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9050 · Cited by 610
Python battery mathematical modelling (PyBaMM)
Sulzer, V., Marquis, S. G., Timms, R., Robinson, M., & Chapman, S. J. (2021) · Journal of Open Research Software · doi:10.5334/jors.309 · Cited by 477
Zhang, C., Allafi, W., Dinh, Q., Ascencio, P., & Marco, J. (2018) · Energy · doi:10.1016/j.energy.2017.10.043 · Cited by 350
Zhang, R., Xia, B., Li, B., Cao, L., Lai, Y., Zheng, W., Wang, H., Wang, W., & Wang, M. (2018) · Energies · doi:10.3390/en11092408 · Cited by 236
Adaptive model parameter identification for large capacity Li-ion batteries on separated time scales
Dai, H., Xu, T., Zhu, L., Wei, X., & Sun, Z. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.10.020 · Cited by 148
An overview of generic battery models
Hussein, A. A.-H., & Batarseh, I. (2011) · 2011 IEEE Power and Energy Society General Meeting · doi:10.1109/pes.2011.6039674 · Cited by 145
Zhu, Q., Li, L., Hu, X., Xiong, N., & Hu, G.-D. (2017) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2723522 · Cited by 83
Review of computational parameter estimation methods for electrochemical models
Miguel, E., Plett, G. L., Trimboli, M. S., Oca, L., Iraola, U., & Bekaert, É. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103388 · Cited by 82
Catenaro, E., & Onori, S. (2021) · Data in Brief · doi:10.1016/j.dib.2021.106894 · Cited by 72
Xu, Y., Hu, M., Fu, C., Cao, K., Su, Z., & Yang, Z. Q. (2019) · Electronics · doi:10.3390/electronics8091012 · Cited by 68
Guo, J., Guo, Q., Liu, J., & Wang, H. (2023) · Batteries · doi:10.3390/batteries9110529 · Cited by 61
A Parameter Identification Method for a Battery Equivalent Circuit Model
Jiang, S. (2011) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2011-01-1367 · Cited by 50
Mathematical Modeling of Lithium Batteries
Hariharan, K. S., Tagade, P., & Ramachandran, S. (2017) · Green energy and technology · doi:10.1007/978-3-319-03527-7 · Cited by 49
Guo, J., Guo, Q., Liu, J., & Wang, H.-W. (2023) · Batteries · doi:10.20944/preprints202309.1731.v1 · Cited by 37
Surya, S., Samanta, A., Marcis, V. A., & Williamson, S. S. (2022) · Energies · doi:10.3390/en15020623 · Cited by 29
Seals, D., Ramesh, P., D’Arpino, M., & Canova, M. (2022) · SAE International Journal of Advances and Current Practices in Mobility · doi:10.4271/2022-01-0701 · Cited by 14
An Electro-Thermal Model for LFP Cells: Calibration Procedure and Validation
Barbieri, M., Ceraolo, M., Lutzemberger, G., & Scarpelli, C. (2022) · Energies · doi:10.3390/en15072653 · Cited by 14
Li-Ion Battery Pack Characterization and Equivalent Electrical Circuit Model Development
Dagci, O. H., & Chandrasekaran, R. (2014) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2014-01-1839 · Cited by 5
Simulation and Validation of a Precise 2RC Model of Lithium-Ion cell Incorporating Wire-bond Losses
Aditya, K. (2023) · International Conference on Control, Communication and Computing (ICCC) · doi:10.1109/iccc57789.2023.10165007 · Cited by 5
Chen, C. (2020) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2020-01-1179 · Cited by 4
Research works printed but not linked: 1
- Newman, J., and Thomas-Alyea, K. (2004). Electrochemical Systems, Wiley-Interscience. [3rd ed.].
Cited by
Lin, C., Wu, L., Tuo, X., Liu, C., Zhang, W., Huang, Z., & Zhang, G. (2025) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2025.01.057 · Cited by 116
Ali, A. O., Abdelrehim, O., Saafan, M. M., Elmarghany, M. R., & Hamed, A. M. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238269 · Cited by 53
Analysis and Verification of Equivalent Circuit Model of Soft-Pack Lithium Batteries
Fei, L., Li, Z., Zhang, Y., Xu, G., Wang, X., & Zhang, H. (2025) · Energies · doi:10.3390/en18030510 · Cited by 9
Moreno, M., Morales-Viscaya, J. A., Cuevas-Gayosso, M. X., Parada-Salado, J. G., & Pérez-Pinal, F. J. (2025) · PLoS ONE · doi:10.1371/journal.pone.0323682 · Cited by 7
A Physics-Guided Transformer for Robust State of Charge Estimation in Aging Lithium-Ion Batteries
Li, X., Wu, G., Chang, F., Xia, W., Sun, S., & Shen, Y. (2025) · Batteries · doi:10.3390/batteries11120446 · Cited by 2
“2) is an open-source, community-driven platform for high-fidelity electrochemical modeling, designed to facilitate collaboration and accelerate battery research by applying modern software engineering practices [32].”
Metadata
- Authors
- Damodaran, V., Paramadayalan, T., Natarajan, D., Kumar C, R., Kanna, P. R., Taler, D., Sobota, T., Taler, J., Szymkiewicz, M., & Ahamed, M. J.
- Affiliations
- University of Windsor (CA)
- Vellore Institute of Technology University (IN)
- Automotive Research Center, Vellore Institute of Technology, Vellore 632014, India
- Cracow University of Technology (PL)
- Corresponding author
- Taler, Jan
- Venue
- Batteries
- Publisher
- MDPI AG
- Published
- 2024-06-19
- Volume
- 10
- Issue
- 6
- Pages
- 215
- ISSN
- 2313-0105 (ISSN-L)
- OpenAlex
- W4399802208
- Cited by
- 15
- References
- 22
- Citations by year
- 2026: 8 · 2025: 7
- FWCI
- 1.62
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Batteries (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Scholarship at UWindsor (University of Windsor) (submittedVersion)
- Funders
- Natural Sciences and Engineering Research Council of Canada (NSERC) (ALLRP 571845-21, RGPIN-2022-04428)
- Discovery (ALLRP 571845-21, RGPIN-2022-04428)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Keywords
- equivalent circuit model, lithium-ion batteries, battery management systems, state of charge estimation, temperature prediction, analytical solution, open-circuit voltage, electric vehicles, battery thermal management
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.