The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Model Development of Stress Intensity Factor on 7057T6 Aluminum Alloy Using Extended Finite Element Method
Open accessAbstract
The stress intensity factor represents a vital parameter within the realm of linear elastic fracture mechanics. It acts as the cornerstone in determining crack propagation and evaluating damage tolerance. However, calculating this factor is a complex task. To surmount this challenge, models of the stress intensity factor for both edge and center cracks were developed using the extended finite element method. The result of this effort is the ability to calculate the stress intensity factor at the crack tip under different loads and normalized crack lengths. The accuracy of these calculations was confirmed by comparing them to results from the NASGRO method, and the optimal mesh sizes for both the crack elements and overall units were established. Further analysis, conducted through MATLAB’s regression analysis, led to the development of an empirical model. This model was found to be both simple and reliable, making it an ideal tool for engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Elastic crack growth in finite elements with minimal remeshing
Belytschko, T., & Black, T. (1999) · International Journal for Numerical Methods in Engineering · doi:10.1002/(sici)1097-0207(19990620)45:5<601::aid-nme598>3.0.co;2-s · Cited by 4,880
The partition of unity finite element method: Basic theory and applications
Melenk, J. M., & Babuška, I. (1996) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(96)01087-0 · Cited by 3,455
Modified NASGRO equation for physically short cracks
Maierhofer, J., Pippan, R., & Gänser, H.-P. (2014) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2013.08.019 · Cited by 180
A coupled meshless finite point/Peridynamic method for 2D dynamic fracture analysis
Shojaei, A., Mudrić, T., Zaccariotto, M., et al. (2016) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2016.11.003 · Cited by 154
A homogenized XFEM approach to simulate fatigue crack growth problems
Kumar, S., Singh, I. V., & Mishra, B. K. (2015) · Computers & Structures · doi:10.1016/j.compstruc.2014.12.008 · Cited by 85
Qi, H., Wen, D., Yuan, Q., Zhang, L., & Chen, Z. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.08.057 · Cited by 84
Self-citationQi, H., Wen, D., Lu, C., & Li, G. (2016) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2016.03.013 · Cited by 83
A hybrid meshfree discretization to improve the numerical performance of peridynamic models
Shojaei, A., Hermann, A., Cyron, C. J., et al. (2022) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2021.114544 · Cited by 70
On the periodicity of fixed-abrasive planetary lapping based on a generic model
Li, H., Yang, Y., Zhao, Y., et al. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.05.036 · Cited by 67
Overall equilibrium in the coupling of peridynamics and classical continuum mechanics
Ongaro, G., Seleson, P., Galvanetto, U., et al. (2021) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2020.113515 · Cited by 58
Research works printed but not linked: 2
- Wu, 2023, Construction of a calibration field of absolute gravity in a cave using the Cold Atom Gravimeter, Sensors, 23, Submitted
- Ji, P.J., Zhang, J.J., Xie, X.D., Ying, R.M., and Zhang, L. (2023). Review on Wear Characteristics of Artificial Hip Joint and Associated Physical Training. Front. Mater., 10.
Cited by
Xie, X., Zhang, L., Zhu, L., Li, Y., Hong, T., Yang, W., & Shan, X. (2023) · Coatings · doi:10.3390/coatings13050859 · Cited by 49
Self-citationQian, H., Chen, M., Qi, Z., Teng, Q., Qi, H., Zhang, L., & Shan, X. (2023) · Crystals · doi:10.3390/cryst13030428 · Cited by 33
Self-citationWang, Y., Wang, Z., Ni, P., Wang, D., Lu, Y., Lu, H., Guo, S., & Chen, Z. (2023) · Coatings · doi:10.3390/coatings13040758 · Cited by 13
Metadata
- Authors
- Yuan, H., Yang, W., Zhang, L., & Hong, T.
- Affiliations
- Lishui University (CN)
- Zhejiang Guanlin Machinery Inc., Anji 313300, China
- Zhejiang University of Technology (CN)
- Corresponding author
- Hong, Tao
- Venue
- Coatings
- Publisher
- MDPI AG
- Published
- 2023-03-07
- Volume
- 13
- Issue
- 3
- Pages
- 581
- ISSN
- 2079-6412 (ISSN-L)
- OpenAlex
- W4323569637
- Cited by
- 12
- References
- 32
- Citations by year
- 2026: 2 · 2025: 2 · 2024: 1 · 2023: 7
- FWCI
- 1.34
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Coatings (publishedVersion, cc-by)
- Funders
- Key Research and Development Program of Zhejiang Province (2021C04011, 51575493, GZKF-202216, 2022ZDYF04, 2022SJZC002)
- National Natural Science Foundation of China (2021C04011, 51575493, GZKF-202216, 2022ZDYF04, 2022SJZC002)
- State Key Laboratory of Fluid Power and Mechatronic Systems (2021C04011, 51575493, GZKF-202216, 2022ZDYF04, 2022SJZC002)
- Lishui Science and Technology Plan Project (2021C04011, 51575493, GZKF-202216, 2022ZDYF04, 2022SJZC002)
- Topics
- Physical Sciences › Engineering › Mechanics of Materials › Numerical methods in engineering
- Physical Sciences › Engineering › Mechanics of Materials › Fatigue and fracture mechanics
- Physical Sciences › Engineering › Mechanics of Materials › Mechanical Behavior of Composites
- Keywords
- stress intensity factor, extended finite element method, edge cracks, central crack, empirical model, crack tip stress, mesh size optimization, linear elastic fracture mechanics, crack propagation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Model Development of Stress Intensity Factor on 7057T6 Aluminum Alloy Using Extended Finite Element Method. https://app.cochat.ai/papers/10.3390/coatings13030581
- The paper
- Yuan, H., Yang, W., Zhang, L., & Hong, T. (2023). Model Development of Stress Intensity Factor on 7057T6 Aluminum Alloy Using Extended Finite Element Method. Coatings. https://doi.org/10.3390/coatings13030581
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.