The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Development of Sustainable Cold Spray Coatings and 3D Additive Manufacturing Components for Repair/Manufacturing Applications: A Critical Review
Open accessAbstract
This review article presents the findings of a comprehensive state-of-the-art literature review of the scientific and technological progress of the cold spray process in the field of repair/remanufacturing using the concept of additive manufacturing. A thorough study was conducted on the potential of this technology to form (a) both thin and thick coatings; (b) the ability to fabricate 3D freeform components in a single process, while benefiting from reduced residual stress level compared to conventional thermal spray coatings processes such as high velocity oxy-fuel (HVOF) or plasma spraying. A systematic overview of the process technology, particularly focusing on the suitability of ceramic-metallic (cermet) composite particles used as feedstock in the deposition was conducted; further elaboration was made pertinent to particle impact and bonding mechanisms during the deposition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bonding mechanism in cold gas spraying
Assadi, H., Gärtner, F., Stoltenhoff, T., & Kreye, H. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00274-x · Cited by 1,811
From Particle Acceleration to Impact and Bonding in Cold Spraying
Schmidt, T., Assadi, H., Gärtner, F., Richter, H., Stoltenhoff, T., Kreye, H., & Klassen, T. (2009) · Journal of Thermal Spray Technology · doi:10.1007/s11666-009-9357-7 · Cited by 638
Cited by
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.01.034 · Cited by 300
End to end process evaluation for additively manufactured liquid rocket engine thrust chambers
Kerstens, F., Cervone, A., & Gradl, P. (2021) · Acta Astronautica · doi:10.1016/j.actaastro.2021.02.034 · Cited by 121
Metadata
- Authors
- Pathak, S., & Saha, G.
- Venue
- Coatings
- Publisher
- MDPI AG
- Published
- 2017-08-14
- Volume
- 7
- Issue
- 8
- Pages
- 122
- ISSN
- 2079-6412 (ISSN-L)
- OpenAlex
- W2747605504
- Cited by
- 180
- References
- 2
- FWCI
- 12.50
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development of Sustainable Cold Spray Coatings and 3D Additive Manufacturing Components for Repair/Manufacturing Applications: A Critical Review. https://app.cochat.ai/papers/10.3390/coatings7080122
- The paper
- Pathak, S., & Saha, G. (2017). Development of Sustainable Cold Spray Coatings and 3D Additive Manufacturing Components for Repair/Manufacturing Applications: A Critical Review. Coatings. https://doi.org/10.3390/coatings7080122
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.