CoChat

The Effect of Biochar on the Properties of Alkali-Activated Slag Pastes

Open access

The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.

Abstract

This paper examines the influence of biochar on the properties of alkali-activated slag pastes using two activator solutions, namely NaOH and Na2CO3. The biochar demonstrated different absorption kinetics in the mixture of slag and the two activator solutions. The pastes with biochar showed a delay in the heat flow peak, compared to the pastes without biochar, but the cumulative heat release in these pastes at later hours was increased, compared to the pastes without biochar. It was found that the use of biochar reduced autogenous shrinkage in the pastes and the reduction in autogenous shrinkage was more pronounced in the alkali-activated slag with NaOH, compared to Na2CO3. The void structure of the pastes was investigated using x-ray micro-computed tomography. It was found that refined pore structure due to reduced effective solution/slag in the pastes with biochar was able to compensate for the decreasing effect of biochar voids on compressive strength. The electrical resistivity was shown to be lower in the pastes with biochar.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/constrmater2010001

Cites

42 of 42 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 SEM micrograph of biochar. Figure 1. SEM micrograph of biochar. Figure 1. SEM micrograph of biochar.
Figure 1 SEM micrograph of biochar. Figure 1. SEM micrograph of biochar. Figure 1. SEM micrograph of biochar.CC-BY · From the PDF
Image 2
CC-BY · From the PDF
Image 3
CC-BY · From the PDF
Figure 4 Absorption of biochar in the activator solutions using the teabag test. Figure 4. Absorption of biochar in the activator solutions using the teabag test.
Figure 4 Absorption of biochar in the activator solutions using the teabag test. Figure 4. Absorption of biochar in the activator solutions using the teabag test.CC-BY · From the PDF
Figure 5 Absorption of biochar in the activator solution + slag mixtures using the modified teabag Figure 5. Absorption of biochar in the activator solution + slag mixtures using the modified teabag test.
Figure 5 Absorption of biochar in the activator solution + slag mixtures using the modified teabag Figure 5. Absorption of biochar in the activator solution + slag mixtures using the modified teabag test.CC-BY · From the PDF
Figure 6 ( a ) Heat flow and ( b ) cumulative heat release corresponding to the pastes with and without biochar. Figure 6. ( a ) Heat flow and ( b ) cumulative heat release corresponding to the pastes with and without biochar.
Figure 6 ( a ) Heat flow and ( b ) cumulative heat release corresponding to the pastes with and without biochar. Figure 6. ( a ) Heat flow and ( b ) cumulative heat release corresponding to the pastes with and without biochar.CC-BY · From the PDF
Figure 7 Autogenous shrinkage of the pastes with and without biochar. Figure 7. Autogenous shrinkage of the pastes with and without biochar.
Figure 7 Autogenous shrinkage of the pastes with and without biochar. Figure 7. Autogenous shrinkage of the pastes with and without biochar.CC-BY · From the PDF
Image 8
CC-BY · From the PDF
Figure 9 TGA curves of the pastes with and without biochar. Figure 9. TGA curves of the pastes with and without biochar.
Figure 9 TGA curves of the pastes with and without biochar. Figure 9. TGA curves of the pastes with and without biochar.CC-BY · From the PDF
Figure 10 Compressive strength of the pastes with and without biochar. Figure 10. Compressive strength of the pastes with and without biochar.
Figure 10 Compressive strength of the pastes with and without biochar. Figure 10. Compressive strength of the pastes with and without biochar.CC-BY · From the PDF
Figure 11 Electrical resistivity of the pastes with and without biochar. Figure 11. Electrical resistivity of the pastes with and without biochar.
Figure 11 Electrical resistivity of the pastes with and without biochar. Figure 11. Electrical resistivity of the pastes with and without biochar.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 42 references

Cited by

See all 30

Metadata

Authors
Prabahar, J., Vafaei, B., Baffoe, E., & Ghahremaninezhad, A.
Affiliations
University of Miami (US)
Corresponding author
Ghahremaninezhad, Ali
Venue
Construction Materials
Publisher
MDPI AG
Published
2021-12-23
Volume
2
Issue
1
Pages
1-14
ISSN
2673-7108 (ISSN-L)
OpenAlex
W4200451055
Cited by
29
References
42
Citations by year
2026: 6 · 2025: 5 · 2024: 5 · 2023: 7 · 2022: 6
FWCI
2.33
Type
journal article
Language
en
Open access
Locations
Construction Materials (publishedVersion, cc-by)
Funders
National Science Foundation (1920127)
Topics
  • Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
  • Physical Sciences › Engineering › Civil and Structural Engineering › Concrete Properties and Behavior
  • Physical Sciences › Engineering › Building and Construction › Materials Engineering and Processing
Keywords
biochar, alkali-activated slag, sodium hydroxide activator, sodium carbonate activator, heat release kinetics, autogenous shrinkage, pore structure, compressive strength, electrical resistivity, micro-computed tomography

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: The Effect of Biochar on the Properties of Alkali-Activated Slag Pastes. https://app.cochat.ai/papers/10.3390/constrmater2010001
The paper
Prabahar, J., Vafaei, B., Baffoe, E., & Ghahremaninezhad, A. (2021). The Effect of Biochar on the Properties of Alkali-Activated Slag Pastes. Construction Materials. https://doi.org/10.3390/constrmater2010001

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.