The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Applications of Gene Expression Programming and Regression Techniques for Estimating Compressive Strength of Bagasse Ash based Concrete
Open accessAbstract
Compressive strength is one of the important property of concrete and depends on many factors. Most of the concrete compressive strength predictive models mainly rely on available literature data, which are too simple to consider all the contributing factors. This study adopted a new approach to predict the compressive strength of sugarcane bagasse ash concrete (SCBAC). A vast amount of data from the literature study and fifteen laboratory tested concrete samples with different dosage of bagasse ash, were respectively used to calibrate and validate the models. The novel Gene Expression Programming, Multiple Linear Regression and Multiple Non-Linear Regression were used to model SCBAC compressive strength. The water cement ratio, bagasse ash percent replacement, quantity of fine and coarse aggregate and cement content were used as an input for models development. Various statistical indicators, i.e., NSE, R2 and RMSE were used to assess the performance of the models. The results indicated a strong correlation between observed and predicted values with NSE and R2 both above 0.8 during calibration and validation for the Gene Expression Programming (GEP). The outcomes from GEP outclassed all the models to predict SCBAC compressive strength. The validity of the model is further verified using data of fifteen tests conducted in the laboratory. Moreover, the cement content in the mix was revealed as the most sensitive parameter followed by water cement ratio form sensitivity analysis. The GEP fulfilled all the criteria for external validity. The simple formulae derived in this study could be used reliably for the prediction of SCBAC compressive strength.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Model Evaluation Guidelines for Systematic Quantification of Accuracy in Watershed Simulations
Moriasi, D. N., Arnold, J. G., Liew, M. W. V., Bingner, R. L., Harmel, R. D., & Veith, T. L. (2007) · Transactions of the ASABE · doi:10.13031/2013.23153 · Cited by 13,446
Golbraikh, A., & Tropsha, A. (2002) · Journal of Molecular Graphics and Modelling · doi:10.1016/s1093-3263(01)00123-1 · Cited by 3,735 · cited 1×
“Furthermore, other criteria for external verification of the models proposed by Golbraikh and Tropsha [74] suggested that the slope of the regression line should be approximately near to 1.”
BackgroundGenetic programming as a means for programming computers by natural selection
Koza, J. (1994) · Statistics and Computing · doi:10.1007/bf00175355 · Cited by 1,685
Cited by
Mohtasham Moein, M., Saradar, A., Rahmati, K., Ghasemzadeh Mousavinejad, S. H., Bristow, J., Aramali, V., & Karakouzian, M. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.105444 · Cited by 391
Song, H., Ahmad, A., Farooq, F., Ostrowski, K. A., Maślak, M., Czarnecki, S., & Aslam, F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125021 · Cited by 384
Self-citationTapeh, A. T. G., & Naser, M. Z. (2023) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-022-09793-w · Cited by 320
Farooq, F., Nasir Amin, M., Khan, K., Rehan Sadiq, M., Faisal Javed, M. F., Aslam, F., & Alyousef, R. (2020) · Applied Sciences · doi:10.3390/app10207330 · Cited by 279
Self-citationPrediction of Compressive Strength of Fly Ash Based Concrete Using Individual and Ensemble Algorithm
Ahmad, A., Farooq, F., Niewiadomski, P., Ostrowski, K., Akbar, A., Aslam, F., & Alyousef, R. (2021) · Materials · doi:10.3390/ma14040794 · Cited by 271
Self-citation
Metadata
- Authors
- Javed, M. F., Amin, M. N., Shah, M. I., Khan, K., Iftikhar, B., Farooq, F., Aslam, F., Alyousef, R., & Alabduljabbar, H.
- Venue
- Crystals
- Publisher
- MDPI AG
- Published
- 2020-08-21
- Volume
- 10
- Issue
- 9
- Pages
- 737
- ISSN
- 2073-4352 (ISSN-L)
- OpenAlex
- W3081231874
- Cited by
- 169
- References
- 3
- FWCI
- 15.87
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.