The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Comparative Study of the Sensitivity of PLA, ABS, PEEK, and PETG’s Mechanical Properties to FDM Printing Process Parameters
Open accessAbstract
Significant advances in fused deposition modeling (FDM), as well as its myriad applications, have led to its growing prominence among additive manufacturing (AM) technologies. When the technology was first developed, it was used for rapid prototyping to examine and analyze a product in the design stage. FDM facilitates rapid production, requires inexpensive tools, and can fabricate complex-shaped parts; it, therefore, became popular and its use widespread. However, various FDM processing parameters have proven to affect the printed part’s mechanical properties to different extents. The values for the printing process parameters are carefully selected based on the part’s application. This study investigates the effects of four process parameters (raster angle, layer thickness, infill percentage, and printing speed) on the mechanical behavior of printed parts that are based on available literature data. These process parameter’s influence on part’s mechanical properties varies depending on the FDM material. The study focuses on four FDM materials: polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), polyether ether ketone (PEEK), and polyethylene terephthalate glycol (PETG). This paper summarizes the state-of-the-art literature to show how sensitive the material’s mechanical properties are to each process parameter. The effect of each parameter on each material was quantified and ranked using analysis of variance (ANOVA). The results show that infill percentage then layer thickness are the most influential process parameter on most of the material’s mechanical properties. In addition, this work identifies gaps in existing studies and highlights opportunities for future research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Additive layer manufacturing of poly (ether ether ketone) via FDM
Rinaldi, M., Ghidini, T., Cecchini, F., Brandao, A., & Nanni, F. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.03.029 · Cited by 301
Cited by
Fico, D., Rizzo, D., Casciaro, R., & Esposito Corcione, C. (2022) · Polymers · doi:10.3390/polym14030465 · Cited by 265
Ahmed, R., Dola, I. S., Ahmed, S., Rahman, M. M., Shanto, T. A., & Taylor, R. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-18078-6 · Cited by 6
Metadata
- Authors
- Algarni, M., & Ghazali, S.
- Venue
- Crystals
- Publisher
- MDPI AG
- Published
- 2021-08-21
- Volume
- 11
- Issue
- 8
- Pages
- 995
- ISSN
- 2073-4352 (ISSN-L)
- OpenAlex
- W3194733596
- Cited by
- 233
- References
- 2
- FWCI
- 10.82
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparative Study of the Sensitivity of PLA, ABS, PEEK, and PETG’s Mechanical Properties to FDM Printing Process Parameters. https://app.cochat.ai/papers/10.3390/cryst11080995
- The paper
- Algarni, M., & Ghazali, S. (2021). Comparative Study of the Sensitivity of PLA, ABS, PEEK, and PETG’s Mechanical Properties to FDM Printing Process Parameters. Crystals. https://doi.org/10.3390/cryst11080995
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.