Additive layer manufacturing of poly (ether ether ketone) via FDM

Metal Additive Manufacturing: A Review

Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984 · see citing works

Additive Manufacturing Technologies

Gibson, I., Rosen, D. W., & Stucker, B. E. (2009) · Springer eBooks · doi:10.1007/978-1-4419-1120-9 · Cited by 4,351 · see citing works

Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing

Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299 · see citing works

A review on stereolithography and its applications in biomedical engineering

Melchels, F. P. W., Feijén, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,473 · see citing works

Anisotropic material properties of fused deposition modeling ABS

Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,396 · see citing works

Additive manufacturing: technology, applications and research needs

Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,096 · see citing works

Mechanical Properties of Solid Polymers

Ward, I. M., & Sweeney, J. (1966) · Wiley eBooks · doi:10.1002/9781119967125 · Cited by 2,081 · see citing works

3D printing with polymers: Challenges among expanding options and opportunities

Stansbury, J. W., & Idacavage, M. J. (2015) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,758 · see citing works

Recent advances in 3D printing of biomaterials

Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734 · see citing works

Parametric appraisal of mechanical property of fused deposition modelling processed parts

Sood, A. K., Ohdar, R., & Mahapatra, S. S. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,332 · see citing works

A review on 3D micro-additive manufacturing technologies

Vaezi, M., Seitz, H., & Yang, S. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,294 · see citing works

The morphology of poly(aryl-ether-ether-ketone)

Blundell, D. J., & Osborn, B. N. (1983) · Polymer · doi:10.1016/0032-3861(83)90144-1 · Cited by 1,044 · see citing works

Lasers and materials in selective laser sintering

Kruth, J., Wang, X., Laoui, T., & Froyen, L. (2003) · Assembly Automation · doi:10.1108/01445150310698652 · Cited by 833 · see citing works

A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness

Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 771 · see citing works

Effect of Layer Orientation on Mechanical Properties of Rapid Prototyped Samples

Es-Said, O. S., Foyos, J., Noorani, R. I., Mendelson, M. I., Marloth, R., & Pregger, B. A. (2000) · Materials and Manufacturing Processes · doi:10.1080/10426910008912976 · Cited by 578 · see citing works

Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials

Perez, A. R. T., Roberson, D. A., & Wicker, R. B. (2014) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-014-9803-9 · Cited by 524 · see citing works

Material properties and fabrication parameters in selective laser sintering process

Gibson, I., & Shi, D. (1997) · Rapid Prototyping Journal · doi:10.1108/13552549710191836 · Cited by 490 · see citing works

Extrusion-based additive manufacturing of PEEK for biomedical applications

Vaezi, M., & Yang, S. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097053 · Cited by 411 · see citing works

Anisotropic Mechanical Properties of ABS Parts Fabricated by Fused Deposition Modelling

Ziemian, C. W., Sharma, M., & Ziemi, S. (2012) · Mechanical Engineering · doi:10.5772/34233 · Cited by 391 · see citing works

Mechanical properties of poly(ether-ether-ketone) for engineering applications

Jones, D. P., Leach, D. C., & Moore, D. R. (1985) · Polymer · doi:10.1016/0032-3861(85)90316-7 · Cited by 332 · see citing works

Solubility and properties of a poly(aryl ether ketone) in strong acids

Bishop, M. T., Karasz, F. E., Russo, P. S., & Langley, K. H. (1985) · Macromolecules · doi:10.1021/ma00143a014 · Cited by 309 · see citing works

Selective Laser Sintering of PEEK

Schmidt, M., Pohle, D., & Rechtenwald, T. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.05.097 · Cited by 306 · see citing works

Review on powder-based electron beam additive manufacturing technology

Gong, X., Anderson, T., & Chou, K. (2014) · Manufacturing Review · doi:10.1051/mfreview/2014001 · Cited by 291 · see citing works

Potential of polyetheretherketone (PEEK) and carbon-fibre-reinforced PEEK in medical applications

Williams, D. F., McNamara, A., & Turner, R. M. (1987) · Journal of Materials Science Letters · doi:10.1007/bf01728981 · Cited by 279 · see citing works

In vitro biocompatibility testing of polymers for orthopaedic implants using cultured fibroblasts and osteoblasts

Morrison, C., Macnair, R., MacDonald, C., Wykman, A., Goldie, I. F., & Grant, M. H. (1995) · Biomaterials · doi:10.1016/0142-9612(95)94906-2 · Cited by 251 · see citing works

Selective laser sintering of biocompatible polymers for applications in tissue engineering

Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Gui, W., Tan, W. S., & Wiria, F. E. (2005) · Bio-Medical Materials and Engineering · doi:10.1177/0959298920050151-2012 · Cited by 207 · see citing works

Potential of polyetheretherketone (PEEK) and carbon fibre reinforced peek in medical applications

(1987) · Composites · doi:10.1016/0010-4361(87)90474-5 · Cited by 201 · see citing works

Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing

McIlroy, C., & Olmsted, P. D. (2017) · Journal of Rheology · doi:10.1122/1.4976839 · Cited by 189 · see citing works

PEEK Biomaterials Handbook

(2012) · Elsevier eBooks · doi:10.1016/c2010-0-66334-6 · Cited by 189 · see citing works

In vivo biocompatibility testing of peek polymer for a spinal implant system: A study in rabbits

Rivard, C., Rhalmi, S., & Coillard, C. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10159 · Cited by 182 · see citing works

On the reinforcement of cement mortars through 3D printed polymeric and metallic fibers

Farina, I., Fabbrocino, F., Carpentieri, G., Modano, M., Amendola, A., Goodall, R., Feo, L., & Fraternali, F. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.12.006 · Cited by 164 · see citing works

Additive Manufacturing

Srivatsan, T. S., & Sudarshan, T. S. (2015) · CRC Press eBooks · doi:10.1201/b19360 · Cited by 151 · see citing works

Poly(aryl‐ether‐ether‐ketone) and its advanced composites: A review

Nguyen, H. X., & Ishida, H. (1987) · Polymer Composites · doi:10.1002/pc.750080202 · Cited by 150 · see citing works

The Effect of Layer Orientation on the Mechanical Properties and Microstructure of a Polymer

Vega, V., Clements, J., Lam, T., Abad, A., Fritz, B., Ula, N. M., & Es-Said, O. S. (2010) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-010-9740-z · Cited by 138 · see citing works

Processability of PEEK, a new polymer for High Temperature Laser Sintering (HT-LS)

Berretta, S., Evans, K., & Ghita, O. R. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.04.003 · Cited by 136 · see citing works

Review on Powder-Based Electron Beam Additive Manufacturing Technology

Gong, X., Anderson, T., & Chou, K. (2012) · doi:10.1115/isfa2012-7256 · Cited by 116 · see citing works

Thermal characterization of recycled polymer for additive manufacturing applications

Boparai, K. S., Singh, R., Fabbrocino, F., & Fraternali, F. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.09.009 · Cited by 107 · see citing works

Improved Mechanical Properties of Fused Deposition Modeling-Manufactured Parts Through Build Parameter Modifications

Hossain, M. S., Espalin, D., Ramos-Grez, J. A., Perez, M. A., & Wicker, R. B. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028538 · Cited by 100 · see citing works

Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing

McIlroy, C., & Olmsted, P. D. (2024) · Figshare · Cited by 95 · see citing works

Study of compression properties of topologically optimized FDM made structured parts

Galantucci, L. M., Lavecchia, F., & Percoco, G. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.03.009 · Cited by 93 · see citing works

Polymorphism in poly(aryl ether ketone)s

Gardner, K. H., Hsiao, B. S., & Faron, K. L. (1994) · Polymer · doi:10.1016/0032-3861(94)90763-3 · Cited by 89 · see citing works

Nanohybrid PVA/ZrO2 and PVA/Al2O3 electrospun mats

Lamastra, F. R., Bianco, A. G., MERIGGI, A., Montesperelli, G., Nanni, F. M. C., & Gusmano, G. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.07.048 · Cited by 60 · see citing works

Systems Analysis of In-Space Manufacturing Applications for the International Space Station and the Evolvable Mars Campaign

Owens, A., & Weck, O. L. D. (2016) · AIAA SPACE 2016 · doi:10.2514/6.2016-5394 · Cited by 54 · see citing works

Crystal Morphology and Phase Identification in Poly(aryl ether ketone)s and Their Copolymers. 3. Polymorphism in a Polymer Containing Alternated Terephthalic Acid and Isophthalic Acid Isomers

Ho, R., Cheng, S. Z. D., Hsiao, B. S., & Gardner, K. H. (1995) · Macromolecules · doi:10.1021/ma00110a030 · Cited by 45 · see citing works

Novel biodegradable polyphosphazenes containing glycine ethyl ester and benzyl ester of amino acethydroxamic acid as cosubstituents

Li, Q., & Zhu, K. J. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20000923)77:13 · Cited by 44 · see citing works

Thermal properties, structure and morphology of PEEK/thermotropic liquid crystalline polymer blends

Naffakh, M., Gómez‐Fatou, M. A., Ellis, G., & Marco, C. (2003) · Polymer International · doi:10.1002/pi.1276 · Cited by 41 · see citing works

Melt processing and mechanical property characterization of high‐performance poly(ether ether ketone)–carbon nanotube composite

Rinaldi, M., Puglia, D., Dominici, F., Cherubini, V., Torre, L., & Nanni, F. M. C. (2017) · Polymer International · doi:10.1002/pi.5451 · Cited by 36 · see citing works

Crystallinity of isothermally and nonisothermally crystallized poly(ether ether ketone) composites

Chen, M., & Chung, C.-T. (1998) · Polymer Composites · doi:10.1002/pc.10141 · Cited by 34 · see citing works

3D printing technology for a moon outpost exploiting lunar soil

Ceccanti, F., Dini, E., Kestelier, X. D., Priami, L., & COLLA, V. (2010) · CINECA IRIS Institutional Research Information System (Sant'Anna School of Advanced Studies) · Cited by 29 · see citing works

OPTIMAL DESIGN AND ADDITIVE MANUFACTURING OF NOVEL REINFORCING ELEMENTS FOR COMPOSITE MATERIALS

Fabbrocino, F., Farina, I., Amendola, A., Feo, L., & Fraternali, F. (2016) · VII European Congress on Computational Methods in Applied Sciences and Engineering · doi:10.7712/100016.1928.4544 · Cited by 28 · see citing works

A comment on crystallization in PEKK and PEEK resins

Avakian, P., Gardner, K. H., & Matheson, R. R. (1990) · Journal of Polymer Science Polymer Letters Edition · doi:10.1002/pol.1990.140280801 · Cited by 25 · see citing works

High Performance Polymers

(2014) · Elsevier eBooks · doi:10.1016/c2013-0-18803-4 · Cited by 19 · see citing works

Crystal structure and drawing-induced polymorphism in poly(aryl ether ether ketone). IV

Liu, T. X., Wang, S., Mo, Z., & Zhang, H. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990711)73:2 · Cited by 18 · see citing works

Aramids

Fink, J. K. (2014) · High Performance Polymers · doi:10.1016/b978-0-323-31222-6.00013-3 · Cited by 14 · see citing works

FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments

Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,095 · see citing works

Recent Progress on Polymer Materials for Additive Manufacturing

Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 745 · see citing works

A critical review on the fused deposition modeling of thermoplastic polymer composites

Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 719 · see citing works

Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges

Chen, L., Liang, S., Liu, Y., & Zhang, L. (2021) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2021.100648 · Cited by 611 · see citing works

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

Wang, P., Zou, B., Ding, S., Li, L., & Huang, C. (2020) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.05.040 · Cited by 376 · see citing works

Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications

Han, X., Yang, D., Yang, C., Spintzyk, S., Scheideler, L., Li, P., Li, D., Geis‐Gerstorfer, J., & Rupp, F. (2019) · Journal of Clinical Medicine · doi:10.3390/jcm8020240 · Cited by 365 · see citing works

Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing

Arif, M. F., Alhashmi, H., Varadarajan, K. M., Koo, J. H., Hart, A. J., & Kumar, S. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107625 · Cited by 245 · see citing works

Fused filament fabrication of peek: A review of process-structure-property relationships

Zanjanijam, A. R., Major, I., Lyons, J. G., Lafont, U., & Devine, D. M. (2020) · Polymers · doi:10.3390/polym12081665 · Cited by 240 · see citing works

Comparative Study of the Sensitivity of PLA, ABS, PEEK, and PETG’s Mechanical Properties to FDM Printing Process Parameters

Algarni, M., & Ghazali, S. M. (2021) · Crystals · doi:10.3390/cryst11080995 · Cited by 237 · see citing works

Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers

Das, A., Chatham, C. A., Fallon, J. J., Zawaski, C. E., Gilmer, E. L., Williams, C. B., & Bortner, M. J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101218 · Cited by 242 · see citing works

3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective

Tian, X., TODOROKI, A., Liu, T., Wu, L., Hou, Z., Ueda, M., Hirano, Y., Matsuzaki, R., Mizukami, K., Iizuka, K., et al. (2022) · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · doi:10.1016/j.cjmeam.2022.100016 · Cited by 235 · see citing works

Semi-crystalline feedstock for filament-based 3D printing of polymers

Vaes, D., & Puyvelde, P. V. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101411 · Cited by 235 · see citing works

3D printing of polyether-ether-ketone for biomedical applications

Singh, S., Prakash, C., & Ramakrishna, S. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.02.035 · Cited by 222 · see citing works

Polymer Recycling in Additive Manufacturing: an Opportunity for the Circular Economy

Shanmugam, V., Das, O., Neisiany, R. E., Babu, K., Singh, S., Hedenqvist, M. S., Berto, F., & Ramakrishna, S. (2020) · Materials Circular Economy · doi:10.1007/s42824-020-00012-0 · Cited by 227 · see citing works

Additive manufacturing of bone scaffolds

Yang, Y., Wang, G., Liang, H., Gao, C., Peng, S., Shen, L., & Shuai, C. (2018) · International Journal of Bioprinting · doi:10.18063/ijb.v5i1.148 · Cited by 217 · see citing works

Developments of PEEK (Polyetheretherketone) as a biomedical material: A focused review

Verma, S., Sharma, N., Kango, S., & Sharma, S. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110295 · Cited by 211 · see citing works

Development of short basalt fiber reinforced polylactide composites and their feasible evaluation for 3D printing applications

Sang, L., Han, S., Li, Z., Yang, X., & Hou, W. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.01.085 · Cited by 188 · see citing works

Effect of 3D printing process parameters on surface and mechanical properties of FFF-printed PEEK

Pulipaka, A., Gide, K. M., Beheshti, A., & Bagheri, Z. S. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.11.057 · Cited by 184 · see citing works

Materials for space exploration and settlement

Ghidini, T. (2018) · Nature Materials · doi:10.1038/s41563-018-0184-4 · Cited by 179 · see citing works

Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments

Harris, M., Potgieter, J., Archer, R. H., & Arif, K. M. (2019) · Materials · doi:10.3390/ma12101664 · Cited by 178 · see citing works

The thermal properties of FDM printed polymeric materials: A review

Shanmugam, V., Babu, K., Kannan, G., Mensah, R. A., Samantaray, S. K., & Das, O. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.110902 · Cited by 180 · see citing works

Molecular Pathways for Polymer Degradation during Conventional Processing, Additive Manufacturing, and Mechanical Recycling

Ceretti, D. V. A., Edeleva, M., Cardon, L., & D’hooge, D. (2023) · Molecules · doi:10.3390/molecules28052344 · Cited by 169 · see citing works

An Experimental Study of Nozzle Temperature and Heat Treatment (Annealing) Effects on Mechanical Properties of High‐Temperature Polylactic Acid in Fused Deposition Modeling

Akhoundi, B., Nabipour, M., Hajami, F., & Shakoori, D. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25353 · Cited by 156 · see citing works

Additive Manufacturing of Polyether Ether Ketone (PEEK) for Space Applications: A Nanosat Polymeric Structure

Rinaldi, M., Cecchini, F., Pigliaru, L., Ghidini, T., Lumaca, F., & Nanni, F. M. C. (2020) · Polymers · doi:10.3390/polym13010011 · Cited by 155 · see citing works

Flexural Properties and Fracture Behavior of CF/PEEK in Orthogonal Building Orientation by FDM: Microstructure and Mechanism

Li, Q., Zhao, W. G., Li, Y., Yang, W., & Wang, G. (2019) · Polymers · doi:10.3390/polym11040656 · Cited by 156 · see citing works

Novel 3D porous biocomposite scaffolds fabricated by fused deposition modeling and gas foaming combined technology

Song, P., Zhou, C., Fan, H., Zhang, B., Pei, X., Fan, Y., Jiang, Q. Y., Bao, R., Yang, Q., Dong, Z., et al. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.06.029 · Cited by 147 · see citing works

Mechanical characterization of biocompatible PEEK by FDM

Zhao, Y., Zhao, K., Li, Y., & Chen, F. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.063 · Cited by 146 · see citing works

3D printed conductive thermoplastic polyurethane/carbon nanotube composites for capacitive and piezoresistive sensing in soft pneumatic actuators

Hohimer, C. J., Petrossian, G., Ameli, A., Mo, C., & Pötschke, P. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101281 · Cited by 147 · see citing works

The Effects of Combined Infill Patterns on Mechanical Properties in FDM Process

Dezaki, M. L., & Ariffin, M. K. A. M. (2020) · Polymers · doi:10.3390/polym12122792 · Cited by 143 · see citing works

3D printed PEEK/HA composites for bone tissue engineering applications: Effect of material formulation on mechanical performance and bioactive potential

Manzoor, F., Golbang, A., Jindal, S. K., Dixon, D., McIlhagger, A., Harkin‐Jones, E., Crawford, D., & Mancuso, E. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104601 · Cited by 142 · see citing works

Interlayer bonding strength of 3D printed PEEK specimens

Liaw, C., Tolbert, J. W., Chow, L. W., & Güvendiren, M. (2021) · Soft Matter · doi:10.1039/d1sm00417d · Cited by 128 · see citing works

Recent advances in additive manufacturing of engineering thermoplastics: challenges and opportunities

Picard, M. C., Mohanty, A. K., & Misra, M. (2020) · RSC Advances · doi:10.1039/d0ra04857g · Cited by 127 · see citing works

Does annealing improve the interlayer adhesion and structural integrity of FFF 3D printed PEEK lumbar spinal cages?

Başgül, C., Yu, T., MacDonald, D. W., Siskey, R. L., Marcolongo, M. S., & Kurtz, S. M. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103455 · Cited by 123 · see citing works

Improvement of the layer-layer adhesion in FFF 3D printed PEEK/carbon fibre composites

Rodzeń, K., Harkin‐Jones, E., Wegrzyn, M., Sharma, P. K., & Zhigunov, A. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106532 · Cited by 122 · see citing works

Advances in hybrid fibers reinforced polymer-based composites prepared by FDM: A review on mechanical properties and prospects

Li, S., Cheng, P., Ahzi, S., Peng, Y. L., Wang, K., Francisco Chinesta, C., & Correia, J. P. M. (2023) · Composites Communications · doi:10.1016/j.coco.2023.101592 · Cited by 119 · see citing works

An overview on the influence of process parameters through the characteristic of 3D-printed PEEK and PEI parts

Magri, A. E., Vanaei, S., & Vaudreuil, S. (2021) · High Performance Polymers · doi:10.1177/09540083211009961 · Cited by 106 · see citing works

An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants

Han, X., Sharma, N., Xu, Z., Scheideler, L., Geis‐Gerstorfer, J., Rupp, F., Thieringer, F. M., & Spintzyk, S. (2019) · Journal of Clinical Medicine · doi:10.3390/jcm8060771 · Cited by 105 · see citing works

Impact of nanosilica on the friction and wear of a PEEK/CF composite coating manufactured by fused deposition modeling (FDM)

Lin, L., Ecke, N., Huang, M., Pei, X., & Schlarb, A. K. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107428 · Cited by 103 · see citing works

Comparative evaluation of supervised machine learning algorithms in the prediction of the relative density of 316L stainless steel fabricated by selective laser melting

Barrionuevo, G., Ramos-Grez, J. A., Walczak, M., & Betancourt, C. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06596-4 · Cited by 97 · see citing works

Recent Advances on High‐Performance Polyaryletherketone Materials for Additive Manufacturing

Chen, P., Wang, H., Su, J. D., Tian, Y., Wen, S., Su, B., Cao, Y., Chen, B., Zhou, K., Yan, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202200750 · Cited by 98 · see citing works

Additive manufacturing of polyetheretherketone and its composites: A review

Francis, J. N., Banerjee, I., Chugh, A., & Singh, J. (2022) · Polymer Composites · doi:10.1002/pc.26961 · Cited by 99 · see citing works

Mechanical properties of thermoplastic parts produced by fused deposition modeling:a review

Bakır, A. A., Atik, R., & Özerinç, S. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2020-0061 · Cited by 88 · see citing works

Tensile and Bending Strength Improvements in PEEK Parts Using Fused Deposition Modelling 3D Printing Considering Multi-Factor Coupling

Li, Y., & Lou, Y. (2020) · Polymers · doi:10.3390/polym12112497 · Cited by 86 · see citing works

Thin-film electronics on active substrates: review of materials, technologies and applications

Catania, F., Oliveira, H. D. S., Lugoda, P., Cantarella, G., & Munzenrieder, N. S. (2022) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ac6af4 · Cited by 85 · see citing works

A review on the potential of polylactic acid based thermoplastic elastomer as filament material for fused deposition modelling

Musa, L., Nitiyah, K. K., Rahim, S. Z. A., Rasidi, M. S. M., Rennie, A., Rahman, R., Kanani, A. Y., & Azmi, A. A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.08.057 · Cited by 84 · see citing works

Flexure Behaviors of ABS-Based Composites Containing Carbon and Kevlar Fibers by Material Extrusion 3D Printing

Wang, K., Li, S., Rao, Y., Wu, Y., Peng, Y. L., Yao, S., Zhang, H., & Ahzi, S. (2019) · Polymers · doi:10.3390/polym11111878 · Cited by 83 · see citing works

Advances in fused deposition modeling of discontinuous fiber/polymer composites

Hu, C. Q., & Qin, Q. (2020) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2020.100867 · Cited by 80 · see citing works

Improvement of Heat Treatment Process on Mechanical Properties of FDM 3D-Printed Short- and Continuous-Fiber-Reinforced PEEK Composites

Wang, P., & Zou, B. (2022) · Coatings · doi:10.3390/coatings12060827 · Cited by 82 · see citing works

From materials to devices using fused deposition modeling: A state-of-art review

Zhang, P., Wang, Z., Li, J., Li, X., & Cheng, L. (2020) · Nanotechnology Reviews · doi:10.1515/ntrev-2020-0101 · Cited by 78 · see citing works

Effects of printing parameters on the tensile behavior of 3D ‐printed acrylonitrile styrene acrylate ( ASA ) material in Z direction

Magri, A. E., Ouassil, S., & Vaudreuil, S. (2022) · Polymer Engineering and Science · doi:10.1002/pen.25891 · Cited by 77 · see citing works

Additive Manufacturing in Off-Site Construction: Review and Future Directions

Pasco, J., Lei, Z., & Aranas, C. (2022) · Buildings · doi:10.3390/buildings12010053 · Cited by 70 · see citing works

Comparison of various 3D printed and milled PAEK materials: Effect of printing direction and artificial aging on Martens parameters

Prechtel, A., Reymus, M., Edelhoff, D., Hickel, R., & Stawarczyk, B. (2019) · Dental Materials · doi:10.1016/j.dental.2019.11.017 · Cited by 71 · see citing works

Simultaneous reinforcement of both rigidity and energy absorption of polyamide-based composites with hybrid continuous fibers by 3D printing

Wang, K., Li, S., Wu, Y., Rao, Y., & Peng, Y. L. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.113854 · Cited by 67 · see citing works

3D printing of high performance polymer-bonded PEEK-NdFeB magnetic composite materials

Pigliaru, L., Rinaldi, M., Ciccacci, L., Norman, A. F., Rohr, T., Ghidini, T., & Nanni, F. M. C. (2020) · Functional Composite Materials · doi:10.1186/s42252-020-00006-w · Cited by 65 · see citing works

Effect of temperature history during additive manufacturing on crystalline morphology of PEEK

Lee, A., Wynn, M., Quigley, L., Salviato, M., & Zobeiry, N. (2022) · Advances in Industrial and Manufacturing Engineering · doi:10.1016/j.aime.2022.100085 · Cited by 67 · see citing works

Neutron Shielding Performance of 3D-Printed Boron Carbide PEEK Composites

Wu, Y., Cao, Y., Wu, Y., & Li, D. (2020) · Materials · doi:10.3390/ma13102314 · Cited by 63 · see citing works

Slow and fast crystallising poly aryl ether ketones (PAEKs) in 3D printing: Crystallisation kinetics, morphology, and mechanical properties

Yi, N., Davies, R., Chaplin, A., McCutchion, P., & Ghita, O. R. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101843 · Cited by 62 · see citing works

The technology of continuous fibre-reinforced polymers: a review on extrusion additive manufacturing methods

Pandelidi, C., Bateman, S. A., Piegert, S., Hoehner, R., Kelbassa, I., & Brandt, M. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06837-6 · Cited by 61 · see citing works

Poly (Ether-Ether-Ketone) for Biomedical Applications: From Enhancing Bioactivity to Reinforced-Bioactive Composites—An Overview

Senra, M. R., Marques, M. D. F. V., & Monteiro, S. N. (2023) · Polymers · doi:10.3390/polym15020373 · Cited by 61 · see citing works

The effect of in-plane layer orientation on mixed-mode I-II fracture behavior of 3D-printed poly-carbonate specimens

Bahrami, B., Ayatollahi, M. R., Sedighi, I., Pérez, M. A., & García‐Granada, A. (2020) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2020.107018 · Cited by 61 · see citing works

Box-Behnken modeling to quantify the impact of control parameters on the energy and tensile efficiency of PEEK in MEX 3D-printing

Vidakis, N., Petousis, M., Mountakis, N., & Karapidakis, E. S. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e18363 · Cited by 60 · see citing works

Modeling the fracture behavior of 3D-printed PLA as a laminate composite: Influence of printing parameters on failure and mechanical properties

Bragaglia, M., Cecchini, F., Paleari, L., Ferrara, M., Rinaldi, M., & Nanni, F. M. C. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.117379 · Cited by 59 · see citing works

Controlling Crystallization: A Key Factor During 3d Printing with the Advanced Semi-Crystalline Polymeric Materials Peek, Pekk 6002 and Pekk 7002

Rodzeń, K., McIlhagger, A., Strachota, B., Strachota, A., Meenan, B. J., & Boyd, A. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200668 · Cited by 58 · see citing works

A comprehensive review of lunar-based manufacturing and construction

Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57 · see citing works

3D and 4D printing: A review of virgin polymers used in fused deposition modeling

Makki, T., Vattathurvalappil, S. H., Theravalappil, R., Nazir, A., Alhajeri, A., Azeem, M. A., Mahdi, E., Ummer, A. C., & Ali, U. (2024) · Composites Part C Open Access · doi:10.1016/j.jcomc.2024.100472 · Cited by 57 · see citing works

Preparation and characterization of poly (ether ether ketone)/poly (ether imide)[PEEK/PEI] blends for fused filament fabrication

El Magri, A., El Mabrouk, K., & Vaudreuil, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-06172-x · Cited by 55 · see citing works

Mechanical performance and bioactivation of 3D-printed PEEK for high-performance implant manufacture: a review

Rendas, P., Figueiredo, L., Machado, C. M., Mourão, A., Vidal, C., & Soares, B. A. R. (2022) · Progress in Biomaterials · doi:10.1007/s40204-022-00214-6 · Cited by 56 · see citing works

Additive Manufacturing of Polyaryletherketone (PAEK) polymers and their composites

Yap, T., Heathman, N., Phillips, T. B., Beaman, J. J., & Tehrani, M. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.111019 · Cited by 58 · see citing works

3D printing high interfacial bonding polyether ether ketone components via pyrolysis reactions

Li, Q., Zhao, W. G., Niu, B., Wang, Y., Wu, X., Ji, J., Li, Y., Zhao, T., Li, H., & Wang, G. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109333 · Cited by 54 · see citing works

Additive manufacturing: a review on mechanical properties of polyjet and FDM printed parts

Chandramohan, P., Raghu, R., & Dhanraj, P. K. (2021) · Polymer Bulletin · doi:10.1007/s00289-021-03899-0 · Cited by 57 · see citing works

Improvement of tensile and flexural properties of 3D printed PEEK through the increase of interfacial adhesion

Rendas, P., Figueiredo, L., Geraldo, M., Vidal, C., & Soares, B. A. R. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.03.024 · Cited by 55 · see citing works

Production and characterization of PEEK/IF-WS2 nanocomposites for additive manufacturing: Simultaneous improvement in processing characteristics and material properties

Golbang, A., Harkin‐Jones, E., Wegrzyn, M., Campbell, G., Archer, E., & McIlhagger, A. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100920 · Cited by 54 · see citing works

Fracture load of 3D printed PEEK inlays compared with milled ones, direct resin composite fillings, and sound teeth

Prechtel, A., Stawarczyk, B., Hickel, R., Edelhoff, D., & Reymus, M. (2020) · Clinical Oral Investigations · doi:10.1007/s00784-020-03216-5 · Cited by 52 · see citing works

High-performance carbon fiber reinforced polyether-ether-ketone composite pellets 3D-Printed via screw-extrusion additive manufacturing

Hu, Z., He, J., Chen, W., Liu, W., Ding, J., He, C., Wang, S., Ning, F., & Li, X. (2023) · Composites Science and Technology · doi:10.1016/j.compscitech.2023.110362 · Cited by 51 · see citing works

Advancements in Metal Additive Manufacturing: A Comprehensive Review of Material Extrusion with Highly Filled Polymers

Sadaf, M., Bragaglia, M., Perše, L. S., & Nanni, F. M. C. (2024) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp8010014 · Cited by 52 · see citing works

Fused-Filament Fabrication of Short Carbon Fiber-Reinforced Polyamide: Parameter Optimization for Improved Performance under Uniaxial Tensile Loading

Belei, C. A. F., Joeressen, J., & Amancio‐Filho, S. T. (2022) · Polymers · doi:10.3390/polym14071292 · Cited by 52 · see citing works

3D Printing of ABS Barium Ferrite Composites

Hanemann, T., Syperek, D., & Nötzel, D. (2020) · Materials · doi:10.3390/ma13061481 · Cited by 50 · see citing works

Additive manufacturing of polyether ether ketone-based composites for space application: a mini-review

Rinaldi, M., Ferrara, M., Pigliaru, L., Allegranza, C., & Nanni, F. M. C. (2021) · CEAS Space Journal · doi:10.1007/s12567-021-00401-4 · Cited by 49 · see citing works

Effect of fiber content on mechanical properties of carbon fiber-reinforced polyether-ether-ketone composites prepared using screw extrusion-based online mixing 3D printing

Lu, S., Zhang, B., Niu, J., Yang, C., Sun, C., Wang, L., & Li, D. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.103976 · Cited by 50 · see citing works

Mechanical and morphological characterization of spherical cell porous structures manufactured using FDM process

Ali, N. B., Khlif, M., Hammami, D., & Bradaï, C. (2019) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2019.106527 · Cited by 48 · see citing works

Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects

Gordeev, E. G., & Ananikov, V. P. (2020) · Russian Chemical Reviews · doi:10.1070/rcr4980 · Cited by 48 · see citing works

Mechanical behavior of 3D printed syntactic foam composites

Bharath, H. S., Sawardekar, A., Waddar, S., Pitchaimani, J., & Doddamani, M. R. (2020) · Composite Structures · doi:10.1016/j.compstruct.2020.112832 · Cited by 47 · see citing works

Slowing crystallization to enhance interlayer strength of 3D printed poly (ether ether ketone) parts by molecular design

Shang, Y., Xu, Q., Jiang, B., Yang, Y., Liu, X. H., Jiang, Z., Yu, C. Y., Li, X., & Zhang, H. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103104 · Cited by 47 · see citing works

Enhanced interlayer strength in 3D printed poly (ether ether ketone) parts

Xu, Q., Xu, W., Yang, Y., Yin, X., Zhou, C., Han, J., Li, X., Shang, Y., & Zhang, H. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102852 · Cited by 44 · see citing works

The Surface Characteristics, Microstructure and Mechanical Properties of PEEK Printed by Fused Deposition Modeling with Different Raster Angles

Gao, S., Liu, R., Xin, H., Liang, H., Wang, Y., & Jia, J. (2021) · Polymers · doi:10.3390/polym14010077 · Cited by 43 · see citing works

Effect of Infill Parameters on the Compressive Strength of 3D-Printed Nylon-Based Material

Liu, J., Naeem, M. A., Kouzbary, M. A., Kouzbary, H. A., Shasmin, H. N., Arifin, N., Razak, N. A. A., & Osman, N. A. A. (2023) · Polymers · doi:10.3390/polym15020255 · Cited by 43 · see citing works

Research on the Fused Deposition Modeling of Polyether Ether Ketone

Gao, R., Xie, J., Yang, J., Zhuo, C., Fu, J., & Zhao, P. (2021) · Polymers · doi:10.3390/polym13142344 · Cited by 43 · see citing works

Label-Free Physical Techniques and Methodologies for Proteins Detection in Microfluidic Biosensor Structures

Коноплев, Г., Agafonova, D. S., Bakhchova, L., Mukhin, N. V., Kurachkina, M., Schmidt, M.-P., Верлов, Н. А., Sidorov, A. I., Oseev, A., Stepanova, O. S., et al. (2022) · Biomedicines · doi:10.3390/biomedicines10020207 · Cited by 43 · see citing works

Fused filament fabrication of nylon 6/66 copolymer: parametric study comparing full factorial and Taguchi design of experiments

Rashed, K., Kafi, A. A., Simons, R., & Bateman, S. A. (2022) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2021-0139 · Cited by 42 · see citing works

Mechanical Properties of Fused Deposition Modeling of Polyetheretherketone (PEEK) and Interest for Dental Restorations: A Systematic Review

Moby, V., Dupagne, L., Fouquet, V., Attal, J., François, P., & Dursun, E. (2022) · Materials · doi:10.3390/ma15196801 · Cited by 39 · see citing works

A machine learning approach for the prediction of melting efficiency in wire arc additive manufacturing

Barrionuevo, G., Sequeira-Almeida, P. M., Ríos, S., Ramos-Grez, J. A., & Williams, S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08966-y · Cited by 41 · see citing works

Laser powder bed fusion of poly-ether-ether-ketone/bioactive glass composites: Processability, mechanical properties, and bioactivity

Wang, H., Chen, P., Shu, Z., Chen, A., Su, J. D., Wu, H., Chen, Z., Yang, L., Yan, C., & Shi, Y. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109805 · Cited by 41 · see citing works

Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks

Sadaf, M., Cano, S., González-Gutiérrez, J., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály, L., Kitzmantel, M., & Nanni, F. M. C. (2022) · Polymers · doi:10.3390/polym14224962 · Cited by 40 · see citing works

Fabricating 3D printable BIIR/PP TPV via masterbatch and interfacial compatibilization

Hou, J., Zhong, M. Q., Pan, X., Chen, L., Wu, X. W., Kong, Z., Yuan, Y., Yan, S., Zhang, J., & Duan, Y. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108220 · Cited by 40 · see citing works

Effects of fused filament fabrication process parameters on tensile properties of polyether ketone ketone (PEKK)

Rashed, K., Kafi, A., Simons, R., & Bateman, S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10134-1 · Cited by 39 · see citing works

Fused filament fabrication of polyetheretherketone/multiwalled carbon nanotube nanocomposites: the effect of thermally conductive nanometric filler on the printability and related properties

Rinaldi, M., Ghidini, T., & Nanni, F. M. C. (2021) · Polymer International · doi:10.1002/pi.6206 · Cited by 40 · see citing works

Optimization of material extrusion additive manufacturing process parameters for polyether ketone ketone (PEKK)

Rashed, K., Kafi, A., Simons, R., & Bateman, S. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11167-w · Cited by 38 · see citing works

Investigation of Dimensional Integrity and Surface Quality of Different Thin-Walled Geometric Parts Produced via Fused Deposition Modeling 3D Printing

Taşdemir, V. (2021) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-021-05809-x · Cited by 38 · see citing works

Contributions of interfaces on the mechanical behavior of 3D printed continuous fiber reinforced composites

Li, S., Wang, K., Zhu, W., Peng, Y. L., Ahzi, S., & Francisco Chinesta, C. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127842 · Cited by 38 · see citing works

Essential work of fracture studies of 3D Printed PEEK (Poly-ether-ether-ketone) polymer

Sharma, G., Vuppuluri, A., & Suresh, K. (2022) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2022.108656 · Cited by 38 · see citing works

A comprehensive analysis on the processing-structure-property relationships of FDM-based 3-D printed polyetheretherketone (PEEK) structures

Sikder, P., Challa, B. T., & Gummadi, S. K. (2022) · Materialia · doi:10.1016/j.mtla.2022.101427 · Cited by 118 · see citing works

Comprehensive Analysis of Fused Deposition Modeling Process Conditions for Enhancing Mechanical Properties and Surface Quality of 3d-Printed Poly-Ether-Ether-KetonePreprint

Zhao, K., Gao, J., Li, W., Wang, J., Wang, X., & Sha, C. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4612027 · Cited by 1 · see citing works

Influence of Process Parameters of 3D Printed PEEK on Crystallinity and Mechanical Performances

Triminì, V., Varetti, S., Percoco, G., Corvaglia, S. G., Gallo, N., & Scavo, I. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-28547-9_21

Effect of process parameters of fused deposition modeling on mechanical properties of poly-ether-ether-ketone and carbon fiber/poly-ether-ether-ketone

Wang, P., Pan, A., Xia, L., Cao, Y., Zhang, H., & Wu, W. (2022) · High Performance Polymers · doi:10.1177/09540083211067388 · Cited by 33 · see citing works

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.016 · Cited by 462 · see citing works