A Survey on Active Fault-Tolerant Control Systems
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Faults and failures in the system components are two main reasons for the instability and the degradation in control performance. In recent decades, fault-tolerant control (FTC) approaches have been introduced to improve the resiliency of control systems against faults and failures. In general, FTC techniques are classified into active and passive approaches. This paper reviews fault and failure causes in control systems and discusses the latest solutions that are introduced to make the control system resilient.The recent achievements in fault detection and isolation (FDI) approaches and active FTC designs are investigated. Furthermore, a thorough comparison of several different aspects is conducted to understand the advantage and disadvantages of various FTC techniques to motivate researchers to further developing FTC and FDI approaches.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135 · cited 5×
“The concept of hardware redundancy in passive FTC systems can be defined as the application of identical components with the same input signal so that the duplicated output signal can be compared with the main component to switch between redundant actuators in case of performance degradation to mitigate the fault effe…”
BackgroundInfluentialBibliographical review on reconfigurable fault-tolerant control systems
Zhang, Y., & Jiang, J. (2008) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2008.03.008 · Cited by 2,652 · cited 1×
“FTC techniques can be divided into two main categories: active and passive [5,42].”
BackgroundSupport vector machine in machine condition monitoring and fault diagnosis
Widodo, A., & Yang, B.-S. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.12.007 · Cited by 1,650
Survey of fault-tolerance techniques for three-phase voltage source inverters
Mirafzal, B. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301712 · Cited by 440
Fault-tolerant control in variable speed drives: a survey
Campos-Delgado, D. U., Espinoza-Trejo, D. R., & Palacios, E. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070203 · Cited by 228 · cited 1×
“, helicopters) [11], electric speed drive systems [12,13], photovoltaic (PV) systems [14], and power electronics systems [15,16].”
BackgroundSpeed/position sensor fault tolerant control in adjustable speed drives – A review
Bourogaoui, M., Sethom, H. B. A., & Belkhodja, I. S. (2016) · ISA Transactions · doi:10.1016/j.isatra.2016.05.003 · Cited by 67
Metadata
- Authors
- Abbaspour, A., Mokhtari, S., Sargolzaei, A., & Yen, K. K.
- Venue
- Electronics
- Publisher
- MDPI AG
- Published
- 2020-09-15
- Volume
- 9
- Issue
- 9
- Pages
- 1513
- ISSN
- 2079-9292 (ISSN-L)
- OpenAlex
- W3085519890
- Cited by
- 218
- References
- 6
- FWCI
- 10.31
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Survey on Active Fault-Tolerant Control Systems. https://app.cochat.ai/papers/10.3390/electronics9091513
- The paper
- Abbaspour, A., Mokhtari, S., Sargolzaei, A., & Yen, K. K. (2020). A Survey on Active Fault-Tolerant Control Systems. Electronics. https://doi.org/10.3390/electronics9091513
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.