A Survey on Active Fault-Tolerant Control Systems
Open accessThe DOI matches its Crossref record; 117 of the 117 references it cites were found in a registry or an index.
Abstract
Faults and failures in the system components are two main reasons for the instability and the degradation in control performance. In recent decades, fault-tolerant control (FTC) approaches have been introduced to improve the resiliency of control systems against faults and failures. In general, FTC techniques are classified into active and passive approaches. This paper reviews fault and failure causes in control systems and discusses the latest solutions that are introduced to make the control system resilient.The recent achievements in fault detection and isolation (FDI) approaches and active FTC designs are investigated. Furthermore, a thorough comparison of several different aspects is conducted to understand the advantage and disadvantages of various FTC techniques to motivate researchers to further developing FTC and FDI approaches.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135 · cited 5×
“The concept of hardware redundancy in passive FTC systems can be defined as the application of identical components with the same input signal so that the duplicated output signal can be compared with the main component to switch between redundant actuators in case of performance degradation to mitigate the fault effe…”
BackgroundInfluentialBibliographical review on reconfigurable fault-tolerant control systems
Zhang, Y., & Jiang, J. (2008) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2008.03.008 · Cited by 2,652 · cited 1×
“FTC techniques can be divided into two main categories: active and passive [5,42].”
BackgroundA review of process fault detection and diagnosis
Venkatasubramanian, V., Rengaswamy, R., Kavuri, S. N., & Yin, K. (2003) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(02)00162-x · Cited by 1,859
Support vector machine in machine condition monitoring and fault diagnosis
Widodo, A., & Yang, B.-S. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.12.007 · Cited by 1,650
Model-based fault-detection and diagnosis – status and applications
Isermann, R. (2005) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2004.12.002 · Cited by 1,579
Sliding mode observers for fault detection and isolation
Edwards, C., Spurgeon, S. K., & Patton, R. J. (2000) · Automatica · doi:10.1016/s0005-1098(99)00177-6 · Cited by 1,343
Model-Based Fault Detection and Diagnosis - Status and Applications
Isermann, R. (2004) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)32149-3 · Cited by 1,262
Johansen, T. A., & Fossen, T. I. (2013) · Automatica · doi:10.1016/j.automatica.2013.01.035 · Cited by 1,133
A generalized likelihood ratio approach to the detection and estimation of jumps in linear systems
Willsky, A., & Jones, H. (1976) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1976.1101146 · Cited by 875 · cited 3×
“This well-known framework is the generalized likelihood ratio approach that was introduced by Willsky and Jones [80] and have been used with different observer approaches for estimation of the system states and then fault detection.”
BackgroundMethodSurvey on Reliability of Power Electronic Systems
Song, Y., & Wang, B. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2192503 · Cited by 861 · cited 1×
“, helicopters) [11], electric speed drive systems [12,13], photovoltaic (PV) systems [14], and power electronics systems [15,16].”
BackgroundManandhar, K., Cao, X., Hu, F., & Liu, Y. (2014) · IEEE Transactions on Control of Network Systems · doi:10.1109/tcns.2014.2357531 · Cited by 786 · cited 1×
“used a Kalman filter to estimate the system states and then a χ2 detector was used for fault alarm in the presence of a fault and false data injection attack in the system [88].”
MethodGao, Z., Cecati, C., & Ding, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2419013 · Cited by 776 · cited 2×
“PCA is one of the most popular monitoring technique, which is used to find factors with a much lower dimension than the original data set, hence the main variations in the original data set can be correctly noticed [18].”
BackgroundFault-Tolerant Control: The 1997 Situation
Patton, R. J. (1997) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)42536-5 · Cited by 722 · cited 1×
“In 1997, Patton presented a comprehensive review of FTC techniques and analyzed the key issues of FTC design [2].”
MethodFault-tolerant control systems: A comparative study between active and passive approaches
Jiang, J., & Yu, X. (2012) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2012.03.005 · Cited by 658 · cited 1×
“A control system that can automatically compensate for a fault (and sometimes failures) effect in the system components while maintaining the system stability along with the desired level of overall performance is called an FTC system [4,6,7,11].”
BackgroundImproved PLS Focused on Key-Performance-Indicator-Related Fault Diagnosis
Yin, S., Zhu, X., & Kaynak, O. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345331 · Cited by 537
Adaptive Fault-Tolerant Tracking Control Against Actuator Faults With Application to Flight Control
Ye, D., & Yang, G.-H. (2006) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2006.883191 · Cited by 506
Failure accomodation in linear systems through self-reorganization.
Beard, R. V. (1971) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 498
State observation of nonlinear uncertain dynamical systems
Walcott, B. L., & Żak, S. H. (1987) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1987.1104530 · Cited by 494
A unified approach to the optimization of fault detection systems
Ding, S. X., Jeinsch, T., Frank, P. M., & Ding, E. L. (2000) · International Journal of Adaptive Control and Signal Processing · doi:10.1002/1099-1115(200011)14:7<725::aid-acs618>3.0.co;2-q · Cited by 455
Intelligent Fault Detection Scheme for Microgrids With Wavelet-Based Deep Neural Networks
Yu, J. J. Q., Hou, Y., Lam, A. Y. S., & Li, V. O. K. (2019) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2017.2776310 · Cited by 451
A comprehensive review on protection challenges and fault diagnosis in PV systems
Pillai, D. S., & Rajasekar, N. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.082 · Cited by 450 · cited 1×
“, helicopters) [11], electric speed drive systems [12,13], photovoltaic (PV) systems [14], and power electronics systems [15,16].”
BackgroundFault Detection and Fault-Tolerant Control Using Sliding Modes
Alwi, H., Edwards, C., & Tan, C. P. (2011) · Advances in industrial control · doi:10.1007/978-0-85729-650-4 · Cited by 449 · cited 5×
“reviewed different kinds of possible faults and failures in the control system and briefly overviewed fault detection and isolation (FDI) and FTC approaches [4].”
BackgroundInfluentialSurvey of fault-tolerance techniques for three-phase voltage source inverters
Mirafzal, B. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301712 · Cited by 440 · cited 1×
“, helicopters) [11], electric speed drive systems [12,13], photovoltaic (PV) systems [14], and power electronics systems [15,16].”
BackgroundA Review on Recent Development of Spacecraft Attitude Fault Tolerant Control System
Yin, S., Xiao, B., Ding, S. X., & Zhou, D. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2530789 · Cited by 430 · cited 1×
“Some survey papers reviewed designing of FTC for a specific application, for instance, FDI and FTC approaches for attitude control in spacecraft [10], single-rotor aircraft (e.”
BackgroundAdaptive Neural Fault-Tolerant Control of a 3-DOF Model Helicopter System
Chen, M., Shi, P., & Lim, C.-C. (2016) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2015.2426140 · Cited by 414
Defending Against False Data Injection Attacks on Power System State Estimation
Deng, R., Xiao, G., & Lu, R. (2015) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2015.2470218 · Cited by 344
Zidani, F., Diallo, D., Benbouzid, M. E. H., & Nait-Said, R. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911951 · Cited by 335
Fault Detection in Wireless Sensor Networks Through SVM Classifier
Zidi, S., Moulahi, T., & Alaya, B. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2017.2771226 · Cited by 327
Sliding mode observers. Tutorial
Drakunov, S., & Utkin, V. (2002) · Proceedings of 1995 34th IEEE Conference on Decision and Control · doi:10.1109/cdc.1995.479009 · Cited by 327
Railway Track Circuit Fault Diagnosis Using Recurrent Neural Networks
de Bruin, T., Verbert, K., & Babuska, R. (2017) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2016.2551940 · Cited by 322
Wang, T., Xu, H., Han, J., Elbouchikhi, E., & Benbouzid, M. E. H. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2393373 · Cited by 273
Liu, Z., & He, H. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.10.168 · Cited by 258 · cited 10×
“One solution to apply Kalman filter to the nonlinear system is to linearize the system around its state using the Taylor expansion series and modify the filter to use this linearized version of the system as a model which is called EKF [105].”
MethodInfluentialAbbaspour, A., Aboutalebi, P., Yen, K. K., & Sargolzaei, A. (2017) · ISA Transactions · doi:10.1016/j.isatra.2016.11.005 · Cited by 239
Self-citationTalebi, H. A., Khorasani, K., & Tafazoli, S. (2009) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2008.2004373 · Cited by 237
Passive Actuators' Fault-Tolerant Control for Affine Nonlinear Systems
Benosman, M., & Lum, K.-Y. (2010) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2008.2009641 · Cited by 235 · cited 1×
“Several approaches have been used in designing passive FTC varies from sliding mode control (SMC) approach [43–45] to H∞ [46–48], Linear Quadratic control [49], fuzzy logic control [50,51], Lyapunov-based control [52], and control allocation [53–55].”
MethodPourbabaee, B., Meskin, N., & Khorasani, K. (2016) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2015.2480003 · Cited by 233 · cited 4×
“, EKF [91,92], unscented Kalman filter (UKF) [93], and Hybrid Kalman filter (HKF) [89].”
MethodInfluentialFault-tolerant control in variable speed drives: a survey
Campos-Delgado, D. U., Espinoza-Trejo, D. R., & Palacios, E. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070203 · Cited by 228 · cited 1×
“, helicopters) [11], electric speed drive systems [12,13], photovoltaic (PV) systems [14], and power electronics systems [15,16].”
BackgroundA PLS-Based Statistical Approach for Fault Detection and Isolation of Robotic Manipulators
Muradore, R., & Fiorini, P. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2167110 · Cited by 221
Resilient Control Design for Load Frequency Control System Under False Data Injection Attacks
Abbaspour, A., Sargolzaei, A., Forouzannezhad, P., Yen, K. K., & Sarwat, A. I. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2944091 · Cited by 219
Self-citationA survey of fault-tolerant controllers based on safety-related issues
Yu, X., & Jiang, J. (2015) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2015.03.004 · Cited by 210 · cited 3×
“In general, redundancy is integrated into the passive fault-tolerant control design to make them resilient against faults [7].”
BackgroundHabibi, H., Howard, I., & Simani, S. (2019) · Renewable Energy · doi:10.1016/j.renene.2018.12.066 · Cited by 208
Detection and Mitigation of False Data Injection Attacks in Networked Control Systems
Sargolzaei, A., Yazdani, K., Abbaspour, A., Crane, C. D., & Dixon, W. E. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2952067 · Cited by 206 · cited 1×
“introduced an EKF approach to improve the accuracy and speed response of the ANN observer, then by the integration of ANN observer with the nonlinear observer, an FDI system for detection of a fault in sensors and actuators in nonlinear systems were developed [27,167].”
MethodSelf-citationChen, H., Jiang, B., Lu, N., & Mao, Z. (2018) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2818538 · Cited by 190
Yang, T., Pen, H., Wang, Z., & Chang, C. S. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2498978 · Cited by 185
Preventing Time-Delay Switch Attack on Load Frequency Control in Distributed Power Systems
Sargolzaei, A., Yen, K. K., & Abdelghani, M. N. (2015) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2015.2503429 · Cited by 183 · cited 1×
“• Denial of service for a period of time due to processor speed and network bandwidth [19,20].”
BackgroundSelf-citationLaghrouche, S., Liu, J., Ahmed, F. S., Harmouche, M., & Wack, M. (2015) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2014.2361869 · Cited by 182
Adaptive cyber‐physical system attack detection and reconstruction with application to power systems
Ao, W., Song, Y., & Wen, C. (2016) · IET Control Theory & Applications · doi:10.1049/iet-cta.2015.1147 · Cited by 172
Passive actuators’ fault tolerant control for affine nonlinear systems
Benosman, M., & Lum, K.-Y. (2008) · IFAC Proceedings Volumes · doi:10.3182/20080706-5-kr-1001.02412 · Cited by 167
Fault tolerant control allocation using unknown input observers
Cristofaro, A., & Johansen, T. A. (2014) · Automatica · doi:10.1016/j.automatica.2014.05.007 · Cited by 167 · cited 1×
“Such modification can be varied from control reconfiguration [32,33] to managing redundancies [34], and analytical redundancy [35–41].”
BackgroundIntelligent failure-tolerant control
Stengel, R. F. (1991) · IEEE Control Systems · doi:10.1109/37.88586 · Cited by 166
Reconfigurable Fault-tolerant Control: A Tutorial Introduction
Lunze, J., & Richter, J. H. (2008) · European Journal of Control · doi:10.3166/ejc.14.359-386 · Cited by 160 · cited 1×
“Luze and Richter presented an introductory tutorial for FTC design based on reconfiguration and reviewed the state-of-the-art achievement in the field [3].”
BackgroundHybrid Fault-Tolerant Flight Control System Design Against Partial Actuator Failures
Yu, X., & Jiang, J. (2012) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2011.2159606 · Cited by 159 · cited 1×
“Hybrid FTC systems are introduced to leverage the advantages of passive and active FTC at the same time [59].”
BackgroundShen, H., Su, L., & Park, J. H. (2016) · Fuzzy Sets and Systems · doi:10.1016/j.fss.2016.09.007 · Cited by 157
Yin, S., Yang, H., Gao, H., Qiu, J., & Kaynak, O. (2016) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2016.2558195 · Cited by 153
Wang, R., & Wang, J. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2232687 · Cited by 147
Implementation of a Nonlinear Attitude Estimator for Aerial Robotic Vehicles
Hua, M., Ducard, G., Hamel, T., Mahony, R. E., & Rudin, K. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2013.2251635 · Cited by 142
A Neural Adaptive Approach for Active Fault-Tolerant Control Design in UAV
Abbaspour, A., Yen, K. K., Forouzannezhad, P., & Sargolzaei, A. (2018) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2018.2850701 · Cited by 138
Self-citationZhang, G., Zhang, H., Huang, X., Wang, J., Yu, H., & Graaf, R. (2015) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2015.2501354 · Cited by 138 · cited 1×
“Such modification can be varied from control reconfiguration [32,33] to managing redundancies [34], and analytical redundancy [35–41].”
BackgroundFault Diagnosis in Internal Combustion Engines Using Extension Neural Network
Shatnawi, Y., & Al-khassaweneh, M. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2261033 · Cited by 135
Detection of Fault Data Injection Attack on UAV Using Adaptive Neural Network
Abbaspour, A., Yen, K. K., Noei, S., & Sargolzaei, A. (2016) · Procedia Computer Science · doi:10.1016/j.procs.2016.09.312 · Cited by 134
Self-citationKarimi, H. R., Zapateiro, M., & Luo, N. (2010) · Journal of the Franklin Institute · doi:10.1016/j.jfranklin.2010.03.004 · Cited by 131
Li, L., Ding, S. X., Qiu, J., & Yang, Y. Z. (2016) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2015.2513438 · Cited by 121
Fault Diagnosis and Fault-Tolerant Control Strategy for the Aerosonde UAV
Bateman, F., Noura, H. N., & Ouladsine, M. (2011) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2011.5937287 · Cited by 118
Efficient Nonlinear Actuator Fault Detection and Isolation System for Unmanned Aerial Vehicles
Ducard, G., & Geering, H. P. (2008) · Journal of Guidance Control and Dynamics · doi:10.2514/1.31693 · Cited by 111 · cited 1×
“• Denial of service for a period of time due to processor speed and network bandwidth [19,20].”
BackgroundA survey on model-based fault diagnosis for linear discrete time-varying systems
Zhong, M., Xue, T., & Ding, S. X. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.04.037 · Cited by 110
Hu, Q., Niu, G., & Wang, C. (2018) · Aerospace Science and Technology · doi:10.1016/j.ast.2017.12.031 · Cited by 109 · cited 1×
“In [78], an integral-type robust sliding mode controller was designed based on the feedback data from the iterative learning FDI unit which could map analytical redundancy in an optimal manner.”
MethodModel-Predictive Dynamic Control Allocation Scheme for Reentry Vehicles
Luo, Y., Serrani, A., Yurkovich, S., Oppenheimer, M. W., & Doman, D. (2006) · Journal of Guidance Control and Dynamics · doi:10.2514/1.25473 · Cited by 108
High-Gain Observers With Sliding Mode for State and Unknown Input Estimations
Veluvolu, K. C., & Soh, Y. C. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2023636 · Cited by 108
Gao, Z., Jiang, B., Shi, P. J., Qian, M., & Lin, J. (2011) · Journal of the Franklin Institute · doi:10.1016/j.jfranklin.2011.11.003 · Cited by 106
Resilient Frequency Control Design for Microgrids Under False Data Injection
Khalghani, M. R., Solanki, J. M., Solanki, S. K., Khooban, M. H., & Sargolzaei, A. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2975494 · Cited by 105 · cited 1×
“Luenberger observer is one of the main UIO observers used for FDI [108].”
BackgroundSelf-citationWang, Z., Liu, L., Zhang, H., & Xiao, G. (2015) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2015.2478885 · Cited by 102
Zhang, K., Jiang, B., Yan, X., & Mao, Z. (2016) · ISA Transactions · doi:10.1016/j.isatra.2016.04.004 · Cited by 99 · cited 13×
“Incorporating adaptive thresholds in the residual analysis is another way to improve the performance of SMO [99].”
InfluentialRashid, M. M., & Yu, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300203u · Cited by 98
A quality-related fault detection approach based on dynamic least squares for process monitoring
Jiao, J., Yu, H., & Wang, G. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2497204 · Cited by 91
Fault diagnosis and Fault Tolerant Control design for aerospace systems: A bibliographical review
Fekih, A. (2014) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2014.6859271 · Cited by 90 · cited 1×
“In [9], FDI and FTC approaches in the aerospace system have been briefly reviewed, and the combination of active and passive FTC was investigated.”
BackgroundBackstepping Design of Adaptive Neural Fault-Tolerant Control for MIMO Nonlinear Systems
Gao, H., Song, Y., & Wen, C. (2016) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2016.2599009 · Cited by 89
Study on Support Vector Machine-Based Fault Detection in Tennessee Eastman Process
Yin, S., Gao, X., Karimi, H. R., & Zhu, X. (2014) · Abstract and Applied Analysis · doi:10.1155/2014/836895 · Cited by 88
Fuzzy Observer-Based Fault Detection Design Approach for Nonlinear Processes
Li, L., Ding, S. X., Qiu, J., Yang, Y. Z., & Xu, D. (2016) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2016.2576453 · Cited by 84
A Review on Fault Diagnosis and Fault Tolerant Control Methods for Single-rotor Aerial Vehicles
Qi, X., Qi, J., Theilliol, D., Zhang, Y. M., Han, J., Song, D., & Hua, C. (2013) · Journal of Intelligent & Robotic Systems · doi:10.1007/s10846-013-9954-z · Cited by 83 · cited 2×
“A control system that can automatically compensate for a fault (and sometimes failures) effect in the system components while maintaining the system stability along with the desired level of overall performance is called an FTC system [4,6,7,11].”
BackgroundObservation and sliding mode observer for nonlinear fractional-order system with unknown input
Djeghali, N., Djennoune, S., Bettayeb, M., et al. (2016) · ISA Transactions · doi:10.1016/j.isatra.2016.02.015 · Cited by 81
Guo, Y., Na, J., Li, B., & Fung, R. (2014) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2014.02.038 · Cited by 80
A Control Reconfiguration Strategy for Post-Sensor FTC in Induction Motor-Based EVs
Tabbache, B., Rizoug, N., Benbouzid, M., & Kheloui, A. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2232325 · Cited by 79 · cited 1×
“Such modification can be varied from control reconfiguration [32,33] to managing redundancies [34], and analytical redundancy [35–41].”
Background$H_{\infty }$ Fuzzy Fault Detection for Uncertain 2-D Systems Under Round-Robin Scheduling Protocol
Luo, Y., Wang, Z., Wei, G., & Alsaadi, F. E. (2016) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2016.2632043 · Cited by 78
Hu, Q., Zhang, Y. M., Huo, X., & Xiao, B. (2011) · Chinese Journal of Aeronautics · doi:10.1016/s1000-9361(11)60005-8 · Cited by 75
Speed/position sensor fault tolerant control in adjustable speed drives – A review
Bourogaoui, M., Sethom, H. B. A., & Belkhodja, I. S. (2016) · ISA Transactions · doi:10.1016/j.isatra.2016.05.003 · Cited by 67
Detection and isolation of incipient sensor faults for a class of uncertain non-linear systems
Zhang, J., Swain, A. K., & Nguang, S. K. (2012) · IET Control Theory and Applications · doi:10.1049/iet-cta.2011.0440 · Cited by 62
de Loza, A. F., Cieslak, J., Henry, D., Davila, J. A., & Zolghadri, A. (2015) · IET Control Theory and Applications · doi:10.1049/iet-cta.2014.0226 · Cited by 61
Wang, J., & Yang, G. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2585559 · Cited by 61 · cited 1×
“In [76], an online recursive identification method was used for FDI and was integrated into a proportional–integral–derivative controller (PID) through a feedback signal to compensate for the fault in the system analytically.”
MethodRobust Switching-Based Fault Tolerant Control
Allerhand, L. I., & Shaked, U. (2014) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2014.2375752 · Cited by 61 · cited 1×
“Allerhand and Shaked introduced an active FTC technique considering the dwelling time among switches which guarantees the stability of the system by solving linear matrix inequalities [67].”
MethodAdaptive fault diagnosis and fault-tolerant control of MIMO nonlinear uncertain systems
Zhang, X., Polycarpou, M. M., & Parisini, T. (2010) · International Journal of Control · doi:10.1080/00207170903580340 · Cited by 59 · cited 1×
“In this strategy, after detection and isolation of the fault in the system, the controller can be reconfigured either by adaptive control strategies [69,70] or receding horizon control [71].”
MethodJiang, B., Xiang, J., & Wang, Y. (2014) · Journal of Vibration and Control · doi:10.1177/1077546314547533 · Cited by 57
Deep learning for automated drivetrain fault detection
Bach‐Andersen, M., Rømer‐Odgaard, B., & Winther, O. (2017) · Wind Energy · doi:10.1002/we.2142 · Cited by 56
Hierarchical Decentralized Receding Horizon Control of Multiple Vehicles with Communication Failures
Izadi, H. A., Gordon, B. W., & Zhang, Y. M. (2013) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2013.6494378 · Cited by 52 · cited 1×
“In this strategy, after detection and isolation of the fault in the system, the controller can be reconfigured either by adaptive control strategies [69,70] or receding horizon control [71].”
MethodApplication of statistical fault detection algorithms to navigation systems monitoring
Nikiforov, I. V., Varavva, V., & Kireichikov, V. (1993) · Automatica · doi:10.1016/0005-1098(93)90050-4 · Cited by 47 · cited 1×
“, generalized likelihood [80], multiple hypothesis test [102], and cumulative sum algorithms [103].”
BackgroundZeghlache, S., Kara, K., & Saigaa, D. (2015) · ISA Transactions · doi:10.1016/j.isatra.2015.09.006 · Cited by 46 · cited 1×
“Several approaches have been used in designing passive FTC varies from sliding mode control (SMC) approach [43–45] to H∞ [46–48], Linear Quadratic control [49], fuzzy logic control [50,51], Lyapunov-based control [52], and control allocation [53–55].”
MethodAnalysis of Automotive Cyber-Attacks on Highways Using Partial Differential Equation Models
Ghanavati, M., Chakravarthy, A., & Menon, P. P. (2017) · IEEE Transactions on Control of Network Systems · doi:10.1109/tcns.2017.2760865 · Cited by 45
Fault tolerant longitudinal aircraft control using non‐linear integral sliding mode
Alwi, H., & Edwards, C. (2014) · IET Control Theory and Applications · doi:10.1049/iet-cta.2013.1029 · Cited by 41
High Confidence Networked Control for Next Generation Air Transportation Systems
Park, P., Khadilkar, H., Balakrishnan, H., & Tomlin, C. J. (2014) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2014.2352011 · Cited by 40
A Fault Detection and Health Monitoring Scheme for Ship Propulsion Systems Using SVM Technique
Zhou, J., Yang, Y. Z., Ding, S. X., Zi, Y., & Wei, M. (2018) · IEEE Access · doi:10.1109/access.2018.2812207 · Cited by 39
High‐gain observer with higher order sliding mode for state and unknown disturbance estimations
Zhou, Y. H., Soh, Y. C., & Shen, J. X. (2013) · International Journal of Robust and Nonlinear Control · doi:10.1002/rnc.2982 · Cited by 37
Support vector machines combined to observers for fault diagnosis in chemical reactors
Sheibat‐Othman, N., Laouti, N., Valour, J. P., & Othman, S. (2013) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.21881 · Cited by 35
Detection of false data injection attack on load frequency control in distributed power systems
Abbaspour, A., Sargolzaei, A., & Yen, K. K. (2017) · North American Power Symposium (NAPS) · doi:10.1109/naps.2017.8107333 · Cited by 32
Self-citationFault Tolerant Control and Fault Detection and Isolation
Alwi, H., Edwards, C., & Tan, C. P. (2011) · Advances in industrial control · doi:10.1007/978-0-85729-650-4_2 · Cited by 32
An Adaptive Resilient Control Approach for Pressure Control in Proton Exchange Membrane Fuel Cells
Abbaspour, A., Yen, K. K., Forouzannezhad, P., & Sargolzaei, A. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2929256 · Cited by 31 · cited 1×
“In [75], an adaptive neural network (NN) approach was used to detect faults in pressure valves of a proton exchange membrane (PEM) fuel cell.”
MethodSelf-citationA safe-parking framework for plant-wide fault-tolerant control
Gandhi, R., & Mhaskar, P. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.03.039 · Cited by 31
Fault detection in non-linear systems based on GP-EKF and GP-UKF algorithms
Safarinejadian, B., & Kowsari, E. (2014) · Systems Science & Control Engineering · doi:10.1080/21642583.2014.956843 · Cited by 29 · cited 1×
“Reference [31] considered the occurrence of three types of abrupt faults, severe vibrations, metal flakes separating, and short circuit.”
BackgroundSalimifard, M., & Talebi, H. A. (2017) · IET Control Theory and Applications · doi:10.1049/iet-cta.2016.1645 · Cited by 28 · cited 1×
“An active FTC system for a multi-agent leader-following system based on wavelet neural network (WNN) was designed [77].”
MethodTang, X., Xie, X., Fan, B., et al. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2795298 · Cited by 27
Unknown Input H$_{\bm \infty}$ Observer-Based Localization of a Mobile Robot With Sensor Failure
Hur, H., & Ahn, H. (2014) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2014.2298034 · Cited by 26
A kernel‐based approach for fault diagnosis in batch processes
Vitale, R., de Noord, O. E., & Ferrer, A. (2014) · Journal of Chemometrics · doi:10.1002/cem.2629 · Cited by 24
Multiple hypothesis-testing approach to FDI for the industrial actuator benchmark
Bøgh, S. A. (1995) · Control Engineering Practice · doi:10.1016/0967-0661(95)00191-v · Cited by 20 · cited 1×
“, generalized likelihood [80], multiple hypothesis test [102], and cumulative sum algorithms [103].”
BackgroundNazarnia, H., & Sarmasti, H. (2018) · Civil Engineering Journal · doi:10.28991/cej-03091165 · Cited by 18
Robust model‐based fault detection and isolation for nonlinear processes using sliding modes
Castillo, I., Edgar, T. F., & Fernandez, B. R. (2011) · International Journal of Robust and Nonlinear Control · doi:10.1002/rnc.1807 · Cited by 18
Namdari, M., Jazayeri‐Rad, H., & Hashemi, S.-J. (2014) · Journal of automation and control · doi:10.12691/automation-2-1-1 · Cited by 18
Fault detection and isolation for nonlinear non-affine uncertain systems via sliding-mode techniques
Ríos, H., Punta, E., & Fridman, L. M. (2016) · International Journal of Control · doi:10.1080/00207179.2016.1173727 · Cited by 18
Abbaspour, A., Sanchez, M., Sargolzaei, A., Yen, K. K., & Sornkhampan, N. (2017) · International Conference on Systems Engineering · doi:10.1109/icseng.2017.12 · Cited by 16
Self-citationFault tolerant control design for complex systems: Current advances and open research problems
Fekih, A. (2015) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2015.7125229 · Cited by 12 · cited 1×
“FTC techniques can be divided into two main categories: active and passive [5,42].”
Background
Metadata
- Authors
- Abbaspour, A., Mokhtari, S., Sargolzaei, A., & Yen, K. K.
- Venue
- Electronics
- Publisher
- MDPI AG
- Published
- 2020-09-15
- Volume
- 9
- Issue
- 9
- Pages
- 1513
- ISSN
- 2079-9292 (ISSN-L)
- OpenAlex
- W3085519890
- Cited by
- 218
- References
- 117
- FWCI
- 10.31
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.