Thermal Conductivity Enhancement of Phase Change Materials for Low-Temperature Thermal Energy Storage Applications
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Low thermal conductivity is the main drawback of phase change materials (PCMs) that is yet to be fully addressed. This paper studies several efficient, cost-effective, and easy-to-use experimental techniques to enhance thermal conductivity of an organic phase change material used for low-temperature thermal energy storage applications. In such applications, the challenges associated with low thermal conductivity of such organic PCMs are even more pronounced. In this investigation, polyethylene glycol (PEG-1000) is used as PCM. To improve the thermal conductivity of the selected PCM, three techniques including addition of carbon powder, and application of aluminum and graphite fins, are utilized. For measurement of thermal conductivity, two experimental methods—including flat and cylindrical configurations—are devised and increments in thermal conductivity are calculated. Melting and solidification processes are analyzed to evaluate melting and solidification zones, and temperature ranges for melting and solidification processes respectively. Furthermore, latent heat of melting is computed under constant values of heat load. Ultimately, specific heat of the PCM in solid state is measured by calorimetry method considering water and methanol as calorimeter fluids. Based on the results, the fin stack can enhance the effective thermal conductivity by more than 40 times with aluminum fins and 33 times with carbon fins. For pure PCM sample, Initiation of melting takes place around 37 °C and continues to above 40 °C depending on input heat load; and solidification temperature range was found to be 33.6–34.9 °C. The investigation will provide a twofold pathway, one to enhance thermal conductivity of PCMs, and secondly ‘relatively easy to set-up’ methods to measure properties of pure and enhanced PCMs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Lin, Y., Jia, Y., Alva, G., & Fang, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.002 · Cited by 910
Sharma, R. K., Ganesan, P., Tyagi, V. V., Metselaar, H. S. C., & Sandaran, S. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.01.084 · Cited by 809 · cited 1×
“Generally, thermal energy storage technologies can be categorized as latent heat with phase change materials (PCMs), sensible heat and those working based on reversible thermochemical reactions [1,2].”
BackgroundA nano-graphite/paraffin phase change material with high thermal conductivity
Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.031 · Cited by 421
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
Liu, L., Su, D., Tang, Y., & Fang, G. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.057 · Cited by 410
Huang, Z., Xie, N., Luo, Z., Gao, X., Fang, X., Fang, Y., & Zhang, Z. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.11.006 · Cited by 66
Research works printed but not linked: 51
- Yan, 2015, A review of promising candidate reactions for chemical heat storage, Renew. Sustain. Energy Rev., 43, 13, 10.1016/j.rser.2014.11.015 · DOI · Paper page
- Ye, 2014, The performance evaluation of shape-stabilized phase change materials in building applications using energy saving index, Appl. Energy, 113, 1118, 10.1016/j.apenergy.2013.08.067 · DOI
- Xu, 2015, Application of phase change materials for thermal energy storage in concentrated solar thermal power plants: A review to recent developments, Appl. Energy, 160, 286, 10.1016/j.apenergy.2015.09.016 · DOI · Paper page
- Ling, 2015, Thermal conductivity of an organic phase change material/expanded graphite composite across the phase change temperature range and a novel thermal conductivity model, Energy Convers. Manag., 102, 202, 10.1016/j.enconman.2014.11.040 · DOI · Paper page
- 2013, High temperature latent heat thermal energy storage: Phase change materials, design considerations and performance enhancement techniques, Renew. Sustain. Energy Rev., 27, 724, 10.1016/j.rser.2013.07.028 · DOI · Paper page
- Fan, 2011, Thermal conductivity enhancement of phase change materials for thermal energy storage: A review, Renew. Sustain. Energy Rev., 15, 24, 10.1016/j.rser.2010.08.007 · DOI · Paper page
- Ibrahim, 2017, Heat transfer enhancement of phase change materials for thermal energy storage applications: A critical review, Renew. Sustain. Energy Rev., 74, 26, 10.1016/j.rser.2017.01.169 · DOI · Paper page
- Liu, 2012, Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems, Renew. Sustain. Energy Rev., 16, 2118, 10.1016/j.rser.2012.01.020 · DOI · Paper page
- Li, 2017, Experimental investigation and theoretical analysis on a mid-temperature solar collector/storage system with composite PCM, Appl. Therm. Eng., 124, 34, 10.1016/j.applthermaleng.2017.06.002 · doi:10.1016/j.applthermaleng.2017.06.002
- Choi, 2014, Thermal conductivity and heat transfer performance enhancement of phase change materials (PCM) containing carbon additives for heat storage application, Int. J. Refrig., 42, 112, 10.1016/j.ijrefrig.2014.02.004 · DOI · Paper page
- Wang, 2010, Enhancing thermal conductivity of palmitic acid based phase change materials with carbon nanotubes as fillers, Sol. Energy, 84, 339, 10.1016/j.solener.2009.12.004 · DOI · Paper page
- Marcos, M.A., Cabaleiro, D., Guimarey, M.J., Comuñas, M.J., Fedele, L., Fernández, J., and Lugo, L. (2018). PEG 400-Based Phase Change Materials Nano-Enhanced with Functionalized Graphene Nanoplatelets. Nanomaterials, 8. · DOI · Paper page
- Khyad, 2016, Energy storage with PCMs: Experimental analysis of paraffin’s phase change phenomenon & improvement of its properties, J. Mater. Environ. Sci., 7, 2551
- Li, 2015, Experimental study on melting/solidification and thermal conductivity enhancement of phase change material inside a sphere, Int. Commun. Heat Mass Transf., 68, 276, 10.1016/j.icheatmasstransfer.2015.09.004 · DOI
- Fois, 2015, Improving thermal conductivity phase change materials—a study of paraffin nanomagnetite composites, Sol. Energy Mater. Sol. Cells, 137, 61, 10.1016/j.solmat.2015.01.027 · DOI · Paper page
- Vallejo, 2018, Potential heat transfer enhancement of functionalized graphene nanoplatelet dispersions in a propylene glycol-water mixture. Thermophysical profile, J. Chem. Thermodyn., 123, 174, 10.1016/j.jct.2018.04.007 · DOI
- Youssef, 2018, CFD modelling development and experimental validation of a phase change material (PCM) heat exchanger with spiral-wired tubes, Energy Convers. Manag., 157, 498, 10.1016/j.enconman.2017.12.036 · DOI
- Abujas, 2016, Performance comparison of a group of thermal conductivity enhancement methodology in phase change material for thermal storage application, Renew. Energy, 97, 434, 10.1016/j.renene.2016.06.003 · DOI
- Mills, 2006, Thermal conductivity enhancement of phase change materials using a graphite matrix, Appl. Therm. Eng., 26, 1652, 10.1016/j.applthermaleng.2005.11.022 · DOI · Paper page
- Pasupathy, 2008, Effect of double layer phase change material in building roof for year round thermal management, Energy Build., 40, 193, 10.1016/j.enbuild.2007.02.016 · DOI
- Arnault, 2010, Internal surfaces including phase change materials for passive optimal shift of solar heat gain, Int. J. Therm. Sci., 49, 2148, 10.1016/j.ijthermalsci.2010.06.021 · DOI
- Li, 2016, Thermal analysis of melting and freezing processes of phase change materials (PCMs) based on dynamic DSC test, Energy Build., 130, 388, 10.1016/j.enbuild.2016.08.058 · DOI
- Ferrer, 2017, New proposed methodology for specific heat capacity determination of materials for thermal energy storage (TES) by DSC, J. Energy Storage, 11, 1, 10.1016/j.est.2017.02.002 · DOI
- Lachheb, 2017, Thermal behavior of a hybrid PCM/plaster: A numerical and experimental investigation, Appl. Therm. Eng., 111, 49, 10.1016/j.applthermaleng.2016.09.083 · DOI
- Mazzeo, 2017, Definition of a new set of parameters for the dynamic thermal characterization of PCM layers in the presence of one or more liquid-solid interfaces, Energy Build., 141, 379, 10.1016/j.enbuild.2017.02.027 · DOI
- Sharifi, 2017, Application of phase change materials in gypsum boards to meet building energy conservation goals, Energy Build., 138, 455, 10.1016/j.enbuild.2016.12.046 · DOI
- Guarino, 2017, PCM thermal storage design in buildings: Experimental studies and applications to solaria in cold climates, Appl. Energy, 185, 95, 10.1016/j.apenergy.2016.10.046 · DOI
- Navarro, 2019, Benchmarking of useful phase change materials for a building application, Energy Build., 182, 45, 10.1016/j.enbuild.2018.10.005 · doi:10.1016/j.enbuild.2018.10.005
- Bouhal, 2018, Parametric CFD analysis and impact of PCM intrinsic parameters on melting process inside enclosure integrating fins: Solar building applications, J. Build. Eng., 20, 634, 10.1016/j.jobe.2018.09.016 · DOI
- Ahangari, 2019, An innovative PCM system for thermal comfort improvement and energy demand reduction in building under different climate conditions, Sustain. Cities Soc., 44, 120, 10.1016/j.scs.2018.09.008 · DOI
- Xie, 2018, Thermal performance analysis of PCM wallboards for building application based on numerical simulation, Sol. Energy, 162, 533, 10.1016/j.solener.2018.01.069 · DOI
- Nada, 2018, Possibility of using PCMs in temperature control and performance enhancements of free stand and building integrated PV modules, Renew. Energy, 127, 630, 10.1016/j.renene.2018.05.010 · doi:10.1016/j.renene.2018.05.010
- Saffari, 2017, Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings, Appl. Energy, 202, 420, 10.1016/j.apenergy.2017.05.107 · DOI · Paper page
- Bal, 2011, Review of solar dryers with latent heat storage systems for agricultural products, Renew. Sustain. Energy Rev., 15, 876, 10.1016/j.rser.2010.09.006 · DOI
- Subburaj, 2015, Overview of grid connected Renew. Energy based battery projects in USA, Renew. Sustain. Energy Rev., 45, 219, 10.1016/j.rser.2015.01.052 · DOI
- Jiang, 2011, A new method to estimate optimal phase change material characteristics in a passive solar room, Energy Convers. Manag., 52, 2437, 10.1016/j.enconman.2010.12.051 · DOI
- Mazzeo, 2017, Experimental validation of the exact analytical solution to the steady periodic heat transfer problem in a PCM layer, Energy, 140, 1131, 10.1016/j.energy.2017.08.045 · DOI
- Sun, 2014, Energy and economic analysis of a building enclosure outfitted with a phase change material board (PCMB), Energy Convers. Manag., 83, 73, 10.1016/j.enconman.2014.03.035 · DOI
- Dwivedi, V.K., Tiwari, P., and Tiwari, S. (2016, January 11–12). Importance of Phase Change Material (PCM) in solar thermal applications: A review. Proceedings of the 2016 International Conference on Emerging Trends in Electrical Electronics & Sustainable Energy Systems (ICETEESES), Sultanpur, India. · doi:10.1109/iceteeses.2016.7581349
- Kenisarin, 2007, Sol. Energy storage using phase change materials, Renew. Sustain. Energy Rev., 11, 1913, 10.1016/j.rser.2006.05.005 · DOI · Paper page
- Malan, 2015, Solar thermal energy storage in power generation using phase change material with heat pipes and fins to enhance heat transfer, Energy Procedia, 69, 925, 10.1016/j.egypro.2015.03.176 · doi:10.1016/j.egypro.2015.03.176
- Wei, 2017, Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: A review, Renew. Sustain. Energy Rev., 81, 1771, 10.1016/j.rser.2017.05.271 · DOI · Paper page
- Mishra, 2015, Latent heat storage through phase change materials, Resonance, 20, 532, 10.1007/s12045-015-0212-5 · DOI
- Maxa, J., Novikov, A., and Nowottnick, M. (2018). Thermal Peak Management Using Organic Phase Change Materials for Latent Heat Storage in Electronic Applications. Materials, 11. · DOI
- Hallworth, 1987, Lava flows, Mod. Geol., 11, 93
- Sharma, 2016, Accelerated thermal cycle and chemical stability testing of polyethylene glycol (PEG) 6000 for solar thermal energy storage, Sol. Energy Mater. Sol. Cells, 147, 235, 10.1016/j.solmat.2015.12.023 · DOI
- Alkan, 2012, Complexing blends of polyacrylic acid-polyethylene glycol and poly(ethylene-co-acrylic acid)-polyethylene glycol as shape stabilized phase change materials, Energy Convers. Manag., 64, 364, 10.1016/j.enconman.2012.06.003 · DOI
- Johansen, 2015, Thermal conductivity enhancement of sodium acetate trihydrate by adding graphite powder and the effect on stability of supercooling, Energy Procedia, 70, 249, 10.1016/j.egypro.2015.02.121 · DOI
- Mao, 2018, Selecting the Best Graphite for Long-Life, High-Energy Li-Ion Batteries, J. Electrochem. Soc., 165, 1837, 10.1149/2.1111809jes · DOI
- Li, Q., Chen, L., Ma, H., and Huang, C.H. (2018). Enhanced Heat Transfer Characteristics of Graphite Concrete and Its Application in Energy Piles. Adv. Mater. Sci. Eng., 2018. · doi:10.1155/2018/8142392
- Dhaidan, 2017, Improved performance of latent heat energy storage systems utilizing high thermal conductivity fins: A review, J. Renew. Sustain. Energy, 9, 034103, 10.1063/1.4989738 · DOI
Cited by
Latent thermal energy storage technologies and applications: A review
Jouhara, H., Żabnieńska-Góra, A., Khordehgah, N., Ahmad, D., & Lipinski, T. (2020) · International Journal of Thermofluids · doi:10.1016/j.ijft.2020.100039 · Cited by 543
A review on hybrid thermal management of battery packs and it's cooling performance by enhanced PCM
Murali, G., Sravya, G. S. N., Jaya, J., & Naga Vamsi, V. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111513 · Cited by 325
Senobar, H., Aramesh, M., & Shabani, B. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101911 · Cited by 111
Self-citationNePCM Based on Silver Dispersions in Poly(Ethylene Glycol) as a Stable Solution for Thermal Storage
Marcos, M. A., Cabaleiro, D., Hamze, S., Fedele, L., Bobbo, S., Estellé, P., & Lugo, L. (2019) · Nanomaterials · doi:10.3390/nano10010019 · Cited by 45
Metadata
- Authors
- Singh, R., Sadeghi, S., & Shabani, B.
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2018-12-27
- Volume
- 12
- Issue
- 1
- Pages
- 75
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W2906738948
- Cited by
- 123
- References
- 6
- FWCI
- 7.04
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal Conductivity Enhancement of Phase Change Materials for Low-Temperature Thermal Energy Storage Applications. https://app.cochat.ai/papers/10.3390/en12010075
- The paper
- Singh, R., Sadeghi, S., & Shabani, B. (2018). Thermal Conductivity Enhancement of Phase Change Materials for Low-Temperature Thermal Energy Storage Applications. Energies. https://doi.org/10.3390/en12010075
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.