The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings
Open accessAbstract
Globally, a considerable amount of energy is consumed by the building sector. The building envelope can highly influence the energy consumption in buildings. In this regard, innovative technologies such as thermal energy storage (TES) can help to boost the energy efficiency and to reduce the CO2 emissions in this sector. The use of phase change materials (PCM), due to its high heat capacity, has been the centre of attention of many researchers. A considerable number of papers have been published on the application of PCM as passive system in building envelopes. Researches have shown that choosing the PCM melting temperature in different climate conditions is a key factor to improve the energy performance in buildings. In the present paper, a simulation-based optimization methodology will be presented by coupling EnergyPlus and GenOpt with an innovative enthalpy-temperature (h-T) function to define the optimum PCM peak melting temperature to enhance the cooling, heating, and the annual total heating and cooling energy performance of a residential building in various climate conditions based on Koppen-Geiger classification. Results show that in a cooling dominant climate the best PCM melting temperature to reduce the annual energy consumption is close to the maximum of 26°C (melting range of 24–28°C), whereas in heating dominant climates PCM with lower melting temperature of 20°C (melting range of 18–22°C) yields higher annual energy benefits. Moreover, it was found that the proper selection of PCM melting temperature in each climate zone can lead to notable energy savings for cooling energy consumption, heating energy consumption, and total annual energy consumption.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Updated world map of the Köppen-Geiger climate classification
Peel, M. C., Finlayson, B. L., & McMahon, T. A. (2007) · doi:10.5194/hessd-4-439-2007 · Cited by 13,640
Updated world map of the Köppen-Geiger climate classification
(2007) · doi:10.5194/hess-11-1633-2007 · Cited by 13,640
World map of the Köppen-Geiger climate classification updated
Kottek, M., Grieser, J., Beck, C., Rudolf, B., & Rubel, F. (2006) · Meteorologische Zeitschrift · doi:10.1127/0941-2948/2006/0130 · Cited by 11,456
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
Self-citation`` Direct Search'' Solution of Numerical and Statistical Problems
Hooke, R., & Jeeves, T. A. (1961) · Journal of the ACM · doi:10.1145/321062.321069 · Cited by 4,254
EnergyPlus: creating a new-generation building energy simulation program
Crawley, D. B., Lawrie, L. K., Winkelmann, F. C., Buhl, W. F., Huang, Y. J., Pedersen, C. O., Strand, R. K., Liesen, R. J., Fisher, D. E., Witte, M. J., et al. (2001) · Energy and Buildings · doi:10.1016/s0378-7788(00)00114-6 · Cited by 2,822
Materials used as PCM in thermal energy storage in buildings: A review
Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, A., & Fernández, A. I. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.018 · Cited by 1,889
Self-citationContrasting the capabilities of building energy performance simulation programs
Crawley, D. B., Hand, J. W., Kummert, M., & Griffith, B. T. (2008) · Building and Environment · doi:10.1016/j.buildenv.2006.10.027 · Cited by 1,858
Passive building energy savings: A review of building envelope components
Sadineni, S. B., Madala, S., & Boehm, R. F. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.014 · Cited by 1,427
Khudhair, A. M., & Farid, M. M. (2004) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00131-6 · Cited by 1,394
Cited by
Review on building energy performance improvement using phase change materials
Song, M., Niu, F., Mao, N., Hu, Y., & Deng, S. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.066 · Cited by 418
Arıcı, M., Bilgin, F., Nižetić, S., & Karabay, H. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114560 · Cited by 324
Mahdi, J. M., Mohammed, H. I., Hashim, E. T., Talebizadehsardari, P., & Nsofor, E. C. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.113993 · Cited by 323
Phase change materials integrated into building walls: An updated review
Lamrani, B., Johannes, K., & Kuznik, F. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110751 · Cited by 274
Potential of microencapsulated PCM for energy savings in buildings: A critical review
Singh Rathore, P. K., Shukla, S. K., & Gupta, N. K. (2020) · Sustainable Cities and Society · doi:10.1016/j.scs.2019.101884 · Cited by 216
Metadata
- Authors
- Saffari, M., de Gracia, A., Fernández, C., & Cabeza, L. F.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2017-09
- Volume
- 202
- Pages
- 420-434
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2621283876
- Cited by
- 343
- References
- 61
- FWCI
- 23.84
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings. https://app.cochat.ai/papers/10.1016/j.apenergy.2017.05.107
- The paper
- Saffari, M., de Gracia, A., Fernández, C., & Cabeza, L. F. (2017). Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings. Applied Energy. https://doi.org/10.1016/j.apenergy.2017.05.107
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.