The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Efficient Solar-to-Thermal Energy Conversion and Storage with High-Thermal-Conductivity and Form-Stabilized Phase Change Composite Based on Wood-Derived Scaffolds
Open accessAbstract
Solar-to-thermal energy conversion is one of the most efficient ways to harvest solar energy. In this study, a novel phase change composite with porous carbon monolith derived from natural wood is fabricated to harvest solar irradiation and store it as thermal energy. Organic phase change material n-octadecane is physically adsorbed inside the porous structure of the carbonized wood, and a thin graphite coating encapsulates the exterior of the wood structure to further prevent n-octadecane leakage. The carbonized wood scaffold and the graphite coating not only stabilize the form of the n-octadecane during phase change, but also enhance its thermal conductivity by 143% while retaining 87% of its latent heat. Under 1-sun irradiation, the composite achieves an apparent 97% solar-to-thermal conversion efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Nevertheless, its inferior thermal conductivity is the dominant concern, which slows down their heat transfer rate while integrating them with solar thermal systems [10,11].”
From Characterization of Hybrid-nano/Paraffin Organic Phase Change Material for Thermal Energy Storage Applications in Solar Thermal Systems (2020) · cites this paper as [10]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090 · cited 1×
“To utilize solar energy, a range of energy conversion techniques have been proposed, such as the conversion of solar light and heat to electricity by photovoltaic [2,3] and thermoelectric [4] devices, respectively.”
MethodPlasmonics for improved photovoltaic devices
Atwater, H. A., & Polman, A. (2010) · Nature Materials · doi:10.1038/nmat2629 · Cited by 8,337 · cited 1×
“To utilize solar energy, a range of energy conversion techniques have been proposed, such as the conversion of solar light and heat to electricity by photovoltaic [2,3] and thermoelectric [4] devices, respectively.”
MethodReview on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Khudhair, A. M., & Farid, M. M. (2004) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00131-6 · Cited by 1,394
Solar energy storage using phase change materials☆
KENISARIN, M., & MAHKAMOV, K. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.05.005 · Cited by 1,376 · cited 1×
“Organic phase change materials (PCMs), which store and release thermal energy in the form of latent heat during the solid/liquid phase change, are often used as TES materials in solar thermal systems [5] due to their low cost, good thermal and chemical stability, relatively high storage density, and small temperature…”
BackgroundYang, J., Zhang, E., Li, X., Zhang, Y., Qu, J., & Yu, Z.-Z. (2016) · Carbon · doi:10.1016/j.carbon.2015.10.082 · Cited by 458
Electro- and Photodriven Phase Change Composites Based on Wax-Infiltrated Carbon Nanotube Sponges
Chen, L., Zou, R., Xia, W., Liu, Z., Shang, Y., Zhu, J., Wang, Y., Lin, J., Xia, D., & Cao, A. (2012) · ACS Nano · doi:10.1021/nn304310n · Cited by 445 · cited 4×
“This could be attributed to the influence of the CW framework on the phase change of the embedded PCMs by interfering with their structural change and therefore increasing and decreasing their melting and freezing peak temperatures, respectively [10,20].”
BackgroundInfluentialCui, Y., Liu, C., Hu, S., & Yu, X. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.021 · Cited by 423
Self-citationYang, J., Qi, G.-Q., Liu, Y., Bao, R.-Y., Liu, Z.-Y., Yang, W., Xie, B.-H., & Yang, M.-B. (2016) · Carbon · doi:10.1016/j.carbon.2016.01.063 · Cited by 415 · cited 2×
“Recently, researchers have discovered that physical absorption of PCMs in porous carbonaceous matrices, such as graphene foam [6], graphene aerogel [9], carbon nanotube sponges [20], etc.”
BackgroundWang, Y., Tang, B., & Zhang, S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203728 · Cited by 405
Research works printed but not linked: 1
- Harold, H.S. (2014). Energy and Society: An Introduction, CRC Press.
Cited by
In Situ Lignin Modification toward Photonic Wood
Xia, Q., Chen, C., Yao, Y., He, S., Wang, X., Li, J., Gao, J., Gan, W., Jiang, B., Cui, M., et al. (2021) · Advanced Materials · doi:10.1002/adma.202001588 · Cited by 174
Self-citationPasupathi, M. K., Alagar, K., P, M. J. S., M.M, M., & Aritra, G. (2020) · Energies · doi:10.3390/en13195079 · Cited by 171
“Nevertheless, its inferior thermal conductivity is the dominant concern, which slows down their heat transfer rate while integrating them with solar thermal systems [10,11].”
BackgroundTian, Y., Yang, R., Pan, H., Zheng, N., & Huang, X. (2024) · Nano Energy · doi:10.1016/j.nanoen.2024.110440 · Cited by 97
Pan, X., Zhang, N., Yuan, Y., Shao, X., Zhong, W., & Li, Y. (2021) · Solar Energy · doi:10.1016/j.solener.2021.10.046 · Cited by 84
A Review of Composite Phase Change Materials Based on Biomass Materials
Zhang, Q., Liu, J., Zhang, J., Lin, L., & Shi, J. (2022) · Polymers · doi:10.3390/polym14194089 · Cited by 78
“[85] carbonized natural wood at a high temperature to produce biomass porous carbon.”
Background
Metadata
- Authors
- Chen, B., Han, M., Zhang, B., Ouyang, G., Shafei, B., Wang, X., & Hu, S.
- Affiliations
- Iowa State University (US)
- Corresponding author
- Hu, Shan
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2019-04-03
- Volume
- 12
- Issue
- 7
- Pages
- 1283
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W2934919276
- Cited by
- 27
- References
- 24
- Citations by year
- 2026: 2 · 2025: 2 · 2024: 6 · 2023: 3 · 2022: 5 · 2021: 4 · 2020: 4 · 2019: 1
- FWCI
- 1.97
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- Iowa State University Digital Repository (Iowa State University) (submittedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Iowa Energy Center (OG-16-005)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Solar Thermal and Photovoltaic Systems
- Keywords
- thermal energy storage, phase change materials, n-octadecane, graphite coating, thermal conductivity enhancement, latent heat, porous carbon composite, solar irradiation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Efficient Solar-to-Thermal Energy Conversion and Storage with High-Thermal-Conductivity and Form-Stabilized Phase Change Composite Based on Wood-Derived Scaffolds. https://app.cochat.ai/papers/10.3390/en12071283
- The paper
- Chen, B., Han, M., Zhang, B., Ouyang, G., Shafei, B., Wang, X., & Hu, S. (2019). Efficient Solar-to-Thermal Energy Conversion and Storage with High-Thermal-Conductivity and Form-Stabilized Phase Change Composite Based on Wood-Derived Scaffolds. Energies. https://doi.org/10.3390/en12071283
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.