Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.

Thermal Analysis of Pure and Nanoparticle-Enhanced PCM—Application in Concentric Tube Heat Exchanger

Open access
T. Nitsas, M., P. Koronaki, I. · 2020 · Energies

Abstract

In this paper, organic phase change materials are modeled and studied both numerically and computationally. The results are compared with those of other research available in the international literature. Regardless of their heat storing capacity, the low heat conductivity of PCMs constitutes a significant obstacle to the further advancement of technologies pertaining to latent heat energy storage, as it hampers the immediate response of systems both at heat storage and at heat recovery. In this work, two types of nanoparticles are used as enhancing media, and the calculations are repeated in terms of melting front and stored energy enhancement. The results show that a 6.5% value for the melt percentage enhancement and a 5.5% value for the heat stored enhancement are exhibited when copper nanoparticles are utilized.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/en13153841

Cites

27 of 27 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 . Figure 1. The analysis domain: (a) Rectangular domain of L = 5 cm with three adiabatic walls; (b) Concentric tube heat exchanger with inner tube diameter d = 22 mm and outer tube diameter D = 125 mm.
Figure 1 . Figure 1. The analysis domain: (a) Rectangular domain of L = 5 cm with three adiabatic walls; (b) Concentric tube heat exchanger with inner tube diameter d = 22 mm and outer tube diameter D = 125 mm.CC-BY · From the PDF
Figure 2 . Figure 2. Flow diagram of the numerical scheme.
Figure 2 . Figure 2. Flow diagram of the numerical scheme.CC-BY · From the PDF
Figure 6 . Figure 6. COMSOL results (a) and comparison with available data from literature (b)[29].
Figure 6 . Figure 6. COMSOL results (a) and comparison with available data from literature (b)[29].CC-BY · From the PDF
Figure 7 . Figure 7. Melting front of RT50, (a) for the first 250 s and (b) at t = 7200 s.
Figure 7 . Figure 7. Melting front of RT50, (a) for the first 250 s and (b) at t = 7200 s.CC-BY · From the PDF
Figure 6 . Figure 6. COMSOL results (a) and comparison with available data from literature (b)[29].
Figure 6 . Figure 6. COMSOL results (a) and comparison with available data from literature (b)[29].CC-BY · From the PDF
.Figure 6 . Figure 6. COMSOL results (a) and comparison with available data from literature (b)[29].
.Figure 6 . Figure 6. COMSOL results (a) and comparison with available data from literature (b)[29].CC-BY · From the PDF
Figure 7 . Figure 7. Melting front of RT50, (a) for the first 250 s and (b) at t = 7200 s.
Figure 7 . Figure 7. Melting front of RT50, (a) for the first 250 s and (b) at t = 7200 s.CC-BY · From the PDF
Figure 10 . Figure 10. Variation of temperature field for 100 s (a), 300 s (b), 500 s (c) and 800 s (d).Figure 10. Variation of temperature field for 100 s (a), 300 s (b), 500 s (c) and 800 s (d).
Figure 10 . Figure 10. Variation of temperature field for 100 s (a), 300 s (b), 500 s (c) and 800 s (d).Figure 10. Variation of temperature field for 100 s (a), 300 s (b), 500 s (c) and 800 s (d).CC-BY · From the PDF
Figure 10 . 21 Figure 11 . Figure 10. Variation of temperature field for 100 s (a), 300 s (b), 500 s (c) and 800 s (d).Figure 10. Variation of temperature field for 100 s (a), 300 s (b), 500 s (c) and 800 s (d).Energies 2020, 13, x FOR PEER REVIEW 14 of 21
Figure 10 . 21 Figure 11 . Figure 10. Variation of temperature field for 100 s (a), 300 s (b), 500 s (c) and 800 s (d).Figure 10. Variation of temperature field for 100 s (a), 300 s (b), 500 s (c) and 800 s (d).Energies 2020, 13, x FOR PEER REVIEW 14 of 21CC-BY · From the PDF
Figure 11 . Figure 11. Temperature field at 900 s.
Figure 11 . Figure 11. Temperature field at 900 s.CC-BY · From the PDF
Figure 12 . Figure 12. Velocity field at 100 s (a), 300 s (b), 500 s (c) and 700 s (d).
Figure 12 . Figure 12. Velocity field at 100 s (a), 300 s (b), 500 s (c) and 700 s (d).CC-BY · From the PDF
Figure 12 . Figure 12. Velocity field at 100 s (a), 300 s (b), 500 s (c) and 700 s (d).
Figure 12 . Figure 12. Velocity field at 100 s (a), 300 s (b), 500 s (c) and 700 s (d).CC-BY · From the PDF
Figure 13 . Figure 13. Velocity field at t = 900 s.
Figure 13 . Figure 13. Velocity field at t = 900 s.CC-BY · From the PDF
Figure 14 . Figure 14. Magnification of Figure 16-formation of molten material vortices.Figure 14. Magnification of Figure 16-formation of molten material vortices.
Figure 14 . Figure 14. Magnification of Figure 16-formation of molten material vortices.Figure 14. Magnification of Figure 16-formation of molten material vortices.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 27 references

Research works printed but not linked: 2

  1. Murray, R., and Groulx, D. (2011, January 13–15). Modeling Convection during Melting of a Phase Change Material. Proceedings of the COMSOL Conference, Boston, MA, USA.
  2. Samara, F., Groulx, D., and Biwole, P. (2012, January 3–5). Natural Convection Driven Melting of Phase Change Material: Comparison of Two Methods. Proceedings of the COMSOL Conference, Boston, MA, USA.

Cited by

See all 13

Metadata

Authors
T. Nitsas, M., & P. Koronaki, I.
Affiliations
School of Mechanical Engineering, National Technical University of Athens, Zografou Campus, 15780 Athens, Greece
Venue
Energies
Publisher
MDPI AG
Published
2020-07-27
Volume
13
Issue
15
Pages
3841
ISSN
1996-1073 (ISSN-L)
OpenAlex
W3044963739
Cited by
13
References
27
Citations by year
2026: 2 · 2025: 1 · 2024: 1 · 2023: 3 · 2022: 1 · 2021: 4 · 2020: 1
FWCI
1.11
Type
journal article
Language
en
Open access
Locations
  • Energies (publishedVersion, cc-by)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • European Commission (MIS- 5033021)
  • State Scholarships Foundation (MIS‐5033021, 5033021)
  • National and Kapodistrian University of Athens
  • National Technical University of Athens
  • European Social Fund (MIS - 5033021, 5033021)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
  • Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Solar Thermal and Photovoltaic Systems
Keywords
phase change materials, organic PCM, nanoparticle-enhanced PCM, copper nanoparticles, latent heat storage, double pipe heat exchanger, melting front, thermal conductivity enhancement, thermal modeling

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Thermal Analysis of Pure and Nanoparticle-Enhanced PCM—Application in Concentric Tube Heat Exchanger. https://app.cochat.ai/papers/10.3390/en13153841
The paper
T. Nitsas, M., & P. Koronaki, I. (2020). Thermal Analysis of Pure and Nanoparticle-Enhanced PCM—Application in Concentric Tube Heat Exchanger. Energies. https://doi.org/10.3390/en13153841

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.