Determining the Heat of Fusion and Specific Heat of Microencapsulated Phase Change Material Slurry by Thermal Delay Method
Open accessThe DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Abstract
This paper details an experimental study that was performed to investigate the specific heat of microencapsulated phase change material (mPCM) slurry and its heat of fusion at the PCM phase change transition temperature. Six samples (mPCM slurry concentrate with the water solution of propylene glycol used as a main base liquid) were prepared. As the concentrate contains 43.0% mPCM, the actual mass fraction amounts to 8.6, 12.9, 17.2, 21.5, 25.8, and 30.1 wt%, respectively. The thermal delay method was used. Samples were cooled from 50 °C to 10 °C. A higher concentration of microcapsules caused a proportional increase in the specific heat of slurry at the main peak melting temperature. The maximum value of the specific heat changed from 9.2 to 33.7 kJ/kg for 8.6 wt%, and 30.1 wt%, respectively. The specific heat of the mPCM slurry is a constant quantity and depends on the concentration of the microcapsules. The specific heat of the slurry (PCM inside microcapsules in a liquid form) decreased from 4.0 to 3.8 kJ/(kgK) for 8.6 wt%, and 30.1 wt% of mPCM, respectively. The specific heat of the slurry (PCM inside microcapsules in a liquid form) was higher than when the PCM in the microcapsules is in the form of a solid and increased from 4.5 to 5.2 kJ/(kgK) for 8.6 wt% and 30.1 wt% of mPCM, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The maximum specific heat varied from 9.2 at the lowest particle concentration to 33.7 kJ/kgat the highest tested concentration.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [26]
The cited source says what the claim attributes to it.
In the citing paper
“It was shown that a higher concentration of particles increased the specific heat at the melting point.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [26]
The cited source says what the claim attributes to it.
In the citing paper
“The specific heat was lower at higher wt % when in liquid form but increased in solid form [26].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [26]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal energy storage materials and systems for solar energy applications
Alva, G., Liu, L., Huang, X., & Fang, G. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.021 · Cited by 996
Microencapsulated PCM thermal-energy storage system
Hawlader, M. N. A., Uddin, M. S., & Khin, M. M. (2003) · Applied Energy · doi:10.1016/s0306-2619(02)00146-0 · Cited by 745
Giro-Paloma, J., Martínez, M., Cabeza, L. F., & Fernández, A. I. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.040 · Cited by 597
Yinping, Z., Yi, J., & Yi, J. (1999) · Measurement Science and Technology · doi:10.1088/0957-0233/10/3/015 · Cited by 489
Al-Waeli, A. H. A., Sopian, K., Chaichan, M. T., Kazem, H. A., Ibrahim, A., Mat, S., & Ruslan, M. H. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.09.032 · Cited by 433
Pandey, A. K., Hossain, M. S., Tyagi, V. V., Abd Rahim, N., Selvaraj, J. A. /., & Sari, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.043 · Cited by 423
An overview of phase change material slurries: MPCS and CHS
Zhang, P., Ma, Z. W., & Wang, R. Z. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.08.015 · Cited by 253
Heat retention of a photovoltaic/thermal collector with PCM
Browne, M. C., Norton, B., & McCormack, S. J. (2016) · Solar Energy · doi:10.1016/j.solener.2016.04.024 · Cited by 250
A review on thermal conductivity enhancement of paraffinwax as latent heat energy storage material
Bose, P., & Amirtham, V. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.071 · Cited by 211
Solé, A., Miró, L., Barreneche, C., Martorell, I., & Cabeza, L. F. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.05.066 · Cited by 209
Yang, R., Xu, H., & Zhang, Y. (2003) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2003.08.005 · Cited by 202
State of the art on phase change material slurries
Youssef, Z., Delahaye, A., Li, H., Trinquet, F., Fournaison, L., Pollerberg, C., & Doetsch, C. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.07.004 · Cited by 177
Chai, L., Shaukat, R., Wang, L., & Wang, H. S. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.02.068 · Cited by 174
Advancement in phase change materials for thermal energy storage applications
Kant, K., Shukla, A., & Sharma, A. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.07.023 · Cited by 141
Qiu, Z., Ma, X., Zhao, X., Li, P., & Ali, S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.053 · Cited by 133
Thermal and rheological properties of microencapsulated phase change materials
Zhang, G., & Zhao, C. (2011) · Renewable Energy · doi:10.1016/j.renene.2011.04.002 · Cited by 129
Micro-encapsulated phase change material (MPCM) slurries: Characterization and building applications
Qiu, Z., Ma, X., Li, P., Zhao, X., & Wright, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.001 · Cited by 121
Saeed, R. M., Schlegel, J. P., Castano, C. H., & Sawafta, R. (2017) · Journal of Energy Storage · doi:10.1016/j.est.2017.11.003 · Cited by 119
Chen, L., Wang, T., Zhao, Y. J., & Zhang, X. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.12.026 · Cited by 110
Jet impingement and spray cooling using slurry of nanoencapsulated phase change materials
Wu, W., Bostanci, H., Chow, L. C., Ding, S., Hong, Y., Su, M., Kizito, J. P., Gschwender, L. J., & Snyder, C. E. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.03.022 · Cited by 101
Huang, M. J., Eames, P., McCormack, S. J., Griffiths, P. W., & Hewitt, N. (2011) · Renewable Energy · doi:10.1016/j.renene.2011.04.004 · Cited by 89
Fu, W., Liang, X., Hongzhou, X., Wang, S., Gao, X., Zhang, Z., & Fang, Y. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.12.001 · Cited by 89
Wang, F., Fang, X., & Zhang, Z. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.10.025 · Cited by 84
Wang, F., Liu, J., Fang, X., & Zhang, Z. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.013 · Cited by 82
Allouche, Y., Varga, S., Bouden, C., & Oliveira, A. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.01.064 · Cited by 79
Multi-layer PCM solidification in a finned triplex tube considering natural convection
Sefidan, A. M., Sojoudi, A., Saha, S. C., & Cholette, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.156 · Cited by 77
Glass encapsulated phase change materials for high temperature thermal energy storage
Giménez-Gavarrell, P., & Fereres, S. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.02.005 · Cited by 72
Liu, L., Jia, Y., Lin, Y., Alva, G., & Fang, G. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.04.089 · Cited by 69
Huang, Z., Xie, N., Luo, Z., Gao, X., Fang, X., Fang, Y., & Zhang, Z. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.11.006 · Cited by 66
Liu, C., Ma, Z., Wang, J., Li, Y., & Rao, Z. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.07.107 · Cited by 64
Thermophysical properties of phase change emulsions prepared by D-phase emulsification
Morimoto, T., Togashi, K., Kumano, H., & Hong, H. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.05.065 · Cited by 62
Microencapsulated n-eicosane PCM suspensions: Thermophysical properties measurement and modeling
Ho, C. J., Chang, P.-C., Yan, W.-M., & Amani, M. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.147 · Cited by 60
Kravvaritis, E. D., Antonopoulos, K. A., & Tzivanidis, C. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.05.032 · Cited by 57
Development of a novel phase change material emulsion for cooling systems
Shao, J., Darkwa, J., & Kokogiannakis, G. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.10.050 · Cited by 57
Rheological and energy transport characteristics of a phase change material slurry
Zhang, P., Ma, Z., Bai, Z., & Ye, J. (2016) · Energy · doi:10.1016/j.energy.2016.03.025 · Cited by 56
Manikandan, S., & Rajan, K. S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.033 · Cited by 54
Sivapalan, B., Chandran, M. N., Manikandan, S., Saranprabhu, M. K., Pavithra, S., & Rajan, K. S. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.01.073 · Cited by 53
The role of vegetable oil in water based phase change materials for medium temperature refrigeration
Rasta, I. M., & Suamir, I. N. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2017.12.014 · Cited by 51
Experimental research of viscosity of microencapsulated PCM slurry at the phase change temperature
Dutkowski, K., & Fiuk, J. J. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.036 · Cited by 49
Self-citationDesign of a low-temperature solar heating system based on a slurry Phase Change Material (PCS)
Serale, G., Fabrizio, E., & Perino, M. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.06.063 · Cited by 47
Wang, L., Zhang, J., Wang, Y., Lin, X., Xie, N., & Chen, H. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.102 · Cited by 42
Rathgeber, C., Schmit, H., Miró, L., Cabeza, L. F., Gutiérrez, A., Ushak, S., & Hiebler, S. (2017) · Journal of Energy Storage · doi:10.1016/j.est.2017.11.002 · Cited by 40
Dutkowski, K., & Fiuk, J. J. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.05.158 · Cited by 40
Self-citationHeat transfer and pressure drop during refrigerants condensation in compact heat exchangers
Kruzel, M., Bohdal, T., & Sikora, M. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120283 · Cited by 37
Self-citationCrystallization of supercooled PCMs inside emulsions: DSC applications
Kousksou, T., Rhafiki, T. E., Mahdaoui, M., Bruel, P., & Zéraouli, Y. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.07.023 · Cited by 36
Li, L., Zou, D., Ma, X., Liu, X., Hu, Z., Guo, J., & Zhu, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.12.043 · Cited by 36
The experimental phase diagram study of the binary polyols system erythritol-xylitol
Gunasekara, S. N., Chiu, J. N., Martin, V., & Hedström, P. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.08.005 · Cited by 36
Li, Y., Zhang, Y., Li, M., & Zhang, D. (2012) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2012.09.010 · Cited by 35
Dutkowski, K., & Kruzel, M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118741 · Cited by 32
Self-citationXie, S., Sun, J., Wang, Z., Liu, S., Han, L., Ma, G., Jing, Y., & Jia, Y. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.04.008 · Cited by 29
Phase change dispersion properties, modeling apparent heat capacity
Fischer, L., von Arx, S., Wechsler, U., Züst, S., & Worlitschek, J. (2016) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2016.10.008 · Cited by 26
The experimental investigation of mPCM slurries density at phase change temperature
Dutkowski, K., Kruzel, M., Zajączkowski, B., & Białko, B. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120083 · Cited by 26
Self-citationRefrigerant condensation in vertical pipe minichannels under various heat flux density level
Bohdal, T., & Kruzel, M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118849 · Cited by 23
Self-citationErythritol, glycerol, their blends, and olive oil, as sustainable phase change materials
Gunasekara, S. N., Stalin, J., Marçal, M., Delubac, R., Karabanova, A., Chiu, J. N., & Martin, V. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.09.517 · Cited by 22
Comparison of Bioethanol Preparation from Triticale Straw Using the Ionic Liquid and Sulfate Methods
Smuga‐Kogut, M., Walendzik, B., Szymanowska, D., Kobus‐Cisowska, J., Wojdalski, J., Wieczorek, M., & Cielecka‐Piontek, J. (2019) · Energies · doi:10.3390/en12061155 · Cited by 20
Enthalpy-temperature Evaluation of Slurry Phase Change Materials with T-history Method
Buttitta, G., Serale, G., & Cascone, Y. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.11.352 · Cited by 18
Production of ethanol from wheat straw
Smuga‐Kogut, M., Wnuk, A. D., Zgórska, K., Kubiak, M. S., Wojdalski, J., Kupczyk, A., Szlachta, J., & Luberański, A. (2015) · Green Sciences · doi:10.1515/pjct-2015-0055 · Cited by 16
Mazo, J., Delgado, M., Peñalosa, C., Dolado, P., Miranda, I., Lázaro, A., Marín, J. M., & Zalba, B. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.035 · Cited by 16
Bohdal, T., Charun, H., Kruzel, M., & Sikora, M. (2018) · E3S Web of Conferences · doi:10.1051/e3sconf/20187002001 · Cited by 9
Self-citationVolumetric solar absorption in a channel with presence of phase change material in a carrier fluid
Siddiqui, O. K., Yilbaş, B. S., Shuja, S. Z., & Wang, E. N. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.04.042 · Cited by 7
Cited by
Encapsulation methods for phase change materials – A critical review
Huang, Y., Stonehouse, A., & Abeykoon, C. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123458 · Cited by 286
Albdour, S. A., Haddad, Z., Sharaf, O. Z., Alazzam, A., & Abu‐Nada, E. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101037 · Cited by 164
Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review
Tofani, K., & Tiari, S. (2021) · Energies · doi:10.3390/en14133821 · Cited by 114
“The specific heat was lower at higher wt % when in liquid form but increased in solid form [26].”
BackgroundMethodKim, H., Zheng, J., Yin, Z., Babu, P., Kumar, S., Tee, J., & Linga, P. (2022) · Energy · doi:10.1016/j.energy.2022.126226 · Cited by 45
Kruzel, M., Bohdal, T., Dutkowski, K., & Radchenko, M. (2022) · Energies · doi:10.3390/en15145142 · Cited by 38
Self-citation
Metadata
- Authors
- Dutkowski, K., Kruzel, M., & Zajączkowski, B.
- Affiliations
- Koszalin University of Technology (PL)
- Wrocław University of Science and Technology (PL)
- Corresponding author
- Kruzel, Marcin
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2020-12-31
- Volume
- 14
- Issue
- 1
- Pages
- 179
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W3115308665
- Cited by
- 21
- References
- 60
- Citations by year
- 2026: 3 · 2025: 1 · 2024: 4 · 2023: 1 · 2022: 7 · 2021: 5
- FWCI
- 1.60
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Engineering › Mechanical Engineering › Refrigeration and Air Conditioning Technologies
- Keywords
- microencapsulated phase change materials, PCM slurry, heat of fusion, specific heat, latent heat storage, melting
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.