Pyrolysis of Biomass Wastes into Carbon Materials
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
This study presents the results of the biomass pyrolysis process focusing on biochar production and its potential energetic (as solid fuel) and material (as adsorbent) applications. Three kinds of biomass waste were investigated: wheat straw, spent coffee grounds, and brewery grains. The pyrolysis process was carried out under nitrogen atmosphere at 400 and 500 °C (residence time of 20 min). A significant increase in the carbon content was observed in the biochars, e.g., from 45% to 73% (at 400 °C) and 77% (at 500 °C) for spent coffee grounds. In addition, the structure and morphology were investigated using scanning electron microscopy. Thermal properties were studied using a simultaneous thermal analysis under an oxidising atmosphere. The chemical activation was completed using KOH. The sorption properties of the obtained biochars were tested using chromium ion (Cr3+) adsorption from liquid solution. The specific surface area and average pore diameter of each sample were determined using the BET method. Finally, it was found that selected biochars can be applied as adsorbent or a fuel. In detail, brewery grains-activated carbon had the highest surface area, wheat straw-activated carbon adsorbed the highest amount of Cr3+, and wheat straw chars presented the best combustion properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of CO2 from flue gas by novel seaweed-based KOH-activated porous biochars
Ding, S., & Liu, Y. (2020) · Fuel · doi:10.1016/j.fuel.2019.116382 · Cited by 311
Cuong, D. V., Matsagar, B. M., Lee, M., Hossain, M. S. A., Yamauchi, Y., Vithanage, M., Sarkar, B., Ok, Y. S., Wu, K. C.-W., & Hou, C.-H. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111029 · Cited by 205
Cited by
Renewable Energy and Energy Storage Systems
Sayed, E., Olabi, A., Alami, A., Radwan, A., Mdallal, A., Rezk, A., & Abdelkareem, M. (2023) · Energies · doi:10.3390/en16031415 · Cited by 596
Rizwan, M., Murtaza, G., Zulfiqar, F., Moosa, A., Iqbal, R., Ahmed, Z., Irshad, S., Khan, I., Li, T., Chen, J., et al. (2023) · Frontiers in Environmental Science · doi:10.3389/fenvs.2023.1277240 · Cited by 60
Pyrolysis Valorization of Vegetable Wastes: Thermal, Kinetic, Thermodynamics, and Pyrogas Analyses
Elkhalifa, S., Mariyam, S., Mackey, H. R., Al-Ansari, T., McKay, G., & Parthasarathy, P. (2022) · Energies · doi:10.3390/en15176277 · Cited by 30
García-Rocha, R., Durón-Torres, S. M., Palomares-Sánchez, S. A., Del Rio-De Santiago, A., Rojas-de Soto, I., & Escalante-García, I. L. (2023) · Materials · doi:10.3390/ma16165571 · Cited by 10
Metadata
- Authors
- Sieradzka, M., Kirczuk, C., Kalemba-Rec, I., Mlonka-Mędrala, A., & Magdziarz, A.
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2022-03-07
- Volume
- 15
- Issue
- 5
- Pages
- 1941
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W4220958668
- Cited by
- 80
- References
- 2
- FWCI
- 4.45
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.