Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 33

The DOI matches its Crossref record.

Hybrid AI–Taguchi–ANOVA Approach for Thermographic Monitoring of Electronic Devices

Laganà, Filippo, Pratticò, Danilo, Quattrone, Marco F., Pullano, Salvatore A., Calcagno, Salvatore · 2026 · Eng

Abstract

Defects in printed circuit boards (PCBs), if not detected promptly, may persist over time until they cause the failure of critical components. Traditional monitoring methods, which are limited to simulations or superficial measurements, obstruct predictive maintenance and real-time fault detection. To address these issues and enhance real-time diagnostics of thermal anomalies in PCBs, this work proposes an integrated system that combines infrared thermography (IRT), artificial intelligence (AI) algorithms, and Taguchi–ANOVA statistical techniques. IR thermography was employed to identify thermal stresses in the devices during normal operation. The IR acquisitions were used to build a dataset for specialized AI model’s training, which combines thermal anomalies segmentation using U-Net with a Multilayer Perceptron (MLP) classifier for heat distribution patterns. The Taguchi method determines the optimal configuration of the selected parameters, while Analysis of Variance (ANOVA) evaluates the effect of each factor on the F1-score response. These techniques statistically validated the AI performance, confirming the optimal set of selected hyperparameters and quantifying their contribution to F1-score. The novelty of the study lies in the integration of real-time infrared thermography with an interpretable AI pipeline and a Taguchi–ANOVA statistical framework, which enables both optimisation and rigorous validation of AI performance under real-time operating conditions.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/eng7010028

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

No references could be resolved yet.

Research works printed but not linked: 89

  1. Zhao, 2024, Skin-inspired soft bioelectronic materials, devices and systems, Nat. Rev. Bioeng., 2, 671, 10.1038/s44222-024-00194-1 · DOI · Paper page
  2. Folgado, F.J., Calderón, D., González, I., and Calderón, A.J. (2024). Review of Industry 4.0 from the Perspective of Automation and Supervision Systems: Definitions, Architectures and Recent Trends. Electronics, 13. · DOI · Paper page
  3. Bandara, R.M.P.N.S., Jayasignhe, A.B., and Retscher, G. (2025). The Integration of IoT (Internet of Things) Sensors and Location-Based Services for Water Quality Monitoring: A Systematic Literature Review. Sensors, 25. · DOI
  4. Laganà, F., Pellicanò, D., Arruzzo, M., Pratticò, D., Pullano, S.A., and Fiorillo, A.S. (2025). FEM-Based Modelling and AI-Enhanced Monitoring System for Upper Limb Rehabilitation. Electronics, 14. · DOI
  5. Rind, Y.M., Raza, M.H., Zubair, M., Mehmood, M.Q., and Massoud, Y. (2023). Smart Energy Meters for Smart Grids, an Internet of Things Perspective. Energies, 16. · DOI
  6. Witczak, D., and Szymoniak, S. (2024). Review of Monitoring and Control Systems Based on Internet of Things. Appl. Sci., 14. · DOI
  7. Bibbò, L., Laganà, F., Bilotta, G., Meduri, G.M., Angiulli, G., and Cotroneo, F. (2025). AI-Enhanced Eco-Efficient UAV Design for Sustainable Urban Logistics: Integration of Embedded Intelligence and Renewable Energy Systems. Energies, 18. · doi:10.3390/en18195242
  8. Menniti, M., Oliva, G., Laganà, F., Bianco, M.G., Fiorillo, A.S., and Pullano, S.A. (2023, January 14–16). Portable Non-Invasive Ventilator for Homecare and Patients Monitoring System. Proceedings of the 2023 IEEE International Symposium on Medical Measurements and Applications (MeMeA), Jeju, Korea. · doi:10.1109/memea57477.2023.10171872
  9. Jagatheesaperumal, 2024, Deep learning for personalized health monitoring and prediction: A review, Comput. Intell., 40, e12682, 10.1111/coin.12682 · DOI
  10. Mila, 2025, IoT for Continuous Physiological Parameters Monitoring in Healthcare: A Review, IEEE Sens. J., 25, 34311, 10.1109/JSEN.2025.3597861 · DOI
  11. Zhang, 2024, Field effect transistor biosensors for healthcare monitoring, Interdiscip. Med., 2, e20240032, 10.1002/INMD.20240032 · DOI
  12. Almusaed, A., Yitmen, I., and Almssad, A. (2023). Reviewing and Integrating AEC Practices into Industry 6.0: Strategies for Smart and Sustainable Future-Built Environments. Sustainability, 15. · doi:10.20944/preprints202308.0860.v1
  13. Wang, 2024, From BIM to digital twin in BIPV: A review of current knowledge, Sustain. Energy Technol. Assess., 67, 103855
  14. 2023, Analysis of emotions in the use of augmented reality technologies in education: A systematic review, Comput. Appl. Eng. Educ., 31, 216, 10.1002/cae.22593 · DOI
  15. Dai, S., Shen, P., Deng, W., and Yu, Q. (2024). Hydrogen Energy in Electrical Power Systems: A Review and Future Outlook. Electronics, 13. · DOI
  16. Pratticò, D., Carlo, D.D., Silipo, G., and Laganà, F. (2025). Hybrid FEM-AI Approach for Thermographic Monitoring of Biomedical Electronic Devices. Computers, 14. · DOI
  17. Sankar, 2022, A review of various defects in PCB, J. Electron. Test., 38, 481, 10.1007/s10836-022-06026-7 · doi:10.1007/s10836-022-06026-7
  18. Abdollahi-Mamoudan, F., Ibarra-Castanedo, C., and Maldague, X.P.V. (2025). Non-Destructive Testing and Evaluation of Hybrid and Advanced Structures: A Comprehensive Review of Methods, Applications, and Emerging Trends. Sensors, 25. · doi:10.20944/preprints202505.0910.v1
  19. Molęda, M., Małysiak-Mrozek, B., Ding, W., Sunderam, V., and Mrozek, D. (2023). From Corrective to Predictive Maintenance—A Review of Maintenance Approaches for the Power Industry. Sensors, 23. · DOI · Paper page
  20. Laganà, F., Bibbò, L., Calcagno, S., De Carlo, D., Pullano, S.A., Pratticò, D., and Angiulli, G. (2025). Smart Electronic Device-Based Monitoring of SAR and Temperature Variations in Indoor Human Tissue Interaction. Appl. Sci., 15. · DOI
  21. Kumar, 2023, Machine learning techniques in additive manufacturing: A state of the art review on design, processes and production control, J. Intell. Manuf., 34, 21, 10.1007/s10845-022-02029-5 · DOI · Paper page
  22. Xie, 2024, Designing semiconductor materials and devices in the post-Moore era by tackling computational challenges with data-driven strategies, Nat. Comput. Sci., 4, 322, 10.1038/s43588-024-00632-5 · DOI
  23. Dalloo, 2024, Approximate computing: Concepts, architectures, challenges, applications, and future directions, IEEE Access, 12, 146022, 10.1109/ACCESS.2024.3467375 · DOI
  24. Liu, 2023, Materials and biomedical applications of implantable electronic devices, Adv. Mater. Technol., 8, 2200853, 10.1002/admt.202200853 · DOI
  25. Pullano, S.A., Oliva, G., Titirsha, T., Shuvo, M.M.H., Islam, S.K., Laganà, F., La Gatta, A., and Fiorillo, A.S. (2024). Design of an Electronic Interface for Single-Photon Avalanche Diodes. Sensors, 24. · doi:10.3390/s24175568
  26. Roy, 2022, Powering solutions for biomedical sensors and implants inside the human body: A comprehensive review on energy harvesting units, energy storage, and wireless power transfer techniques, IEEE Trans. Power Electron., 37, 12237, 10.1109/TPEL.2022.3164890 · DOI · Paper page
  27. Chen, 2023, A comprehensive review of deep learning-based PCB defect detection, IEEE Access, 11, 139017, 10.1109/ACCESS.2023.3339561 · DOI
  28. Khalili, 2025, A comprehensive review of failure modes in electrical submersible pumps: Diagnosis, predictive maintenance, and engineer’s guide, Arab. J. Sci. Eng., 50, 20445, 10.1007/s13369-025-10536-9 · DOI
  29. Balakrishnan, G.K., Yaw, C.T., Koh, S.P., Abedin, T., Raj, A.A., Tiong, S.K., and Chen, C.P. (2022). A Review of Infrared Thermography for Condition-Based Monitoring in Electrical Energy: Applications and Recommendations. Energies, 15. · DOI
  30. Kim, R.G., Abisado, M., Villaverde, J., and Sampedro, G.A. (2023). A Survey of Image-Based Fault Monitoring in Additive Manufacturing: Recent Developments and Future Directions. Sensors, 23. · DOI
  31. Zhang, 2024, YOLO-RRL: A Lightweight Algorithm for PCB Surface Defect Detection, Appl. Sci., 14, 7460, 10.3390/app14177460 · DOI
  32. Ural, 2024, Research on PCB defect detection using artificial intelligence: A systematic mapping study, Evol. Intell., 17, 3101, 10.1007/s12065-024-00930-x · DOI
  33. Eisentraut, 2025, Defect Detection in Industrial Soldering Processes Using Machine Learning: A Critical Literature Review, IEEE Access, 13, 41533, 10.1109/ACCESS.2025.3547847 · DOI
  34. Kalita, 2023, Finite element modelling, predictive modelling and optimization of metal inert gas, tungsten inert gas and friction stir welding processes: A comprehensive review, Arch. Comput. Methods Eng., 30, 271, 10.1007/s11831-022-09797-6 · doi:10.1007/s11831-022-09797-6
  35. Hassani, S., and Dackermann, U. (2023). A Systematic Review of Optimization Algorithms for Structural Health Monitoring and Optimal Sensor Placement. Sensors, 23. · DOI · Paper page
  36. Bibbò, L., Angiulli, G., Laganà, F., Pratticò, D., Cotroneo, F., La Foresta, F., and Versaci, M. (2025). MEMS and IoT in HAR: Effective Monitoring for the Health of Older People. Appl. Sci., 15. · DOI
  37. Alemaryeen, A., and Noghanian, S. (2023). A Survey of the Thermal Analysis of Implanted Antennas for Wireless Biomedical Devices. Micromachines, 14. · doi:10.3390/mi14101894
  38. Benelhaouare, A.Z., Mellal, I., Saydé, M., Nicolescu, G., and Lakhssassi, A. (2025). Thermal Side-Channel Threats in Densely Integrated Microarchitectures: A Comprehensive Review for Cyber–Physical System Security. Micromachines, 16. · doi:10.3390/mi16101152
  39. Seckin, M., Demircioglu, P., Seckin, A.C., Bogrekci, I., and Aksoy, S. (2025). Artificial Intelligence for Non-Destructive Imaging in Composite Materials. Eng, 6. · doi:10.3390/eng6030046
  40. De Carlo, D., Laganà, F., Pratticò, D., and Pullano, S.A. (2024, January 14–15). Development of an integrated system for remote monitoring of circuit integrity in biomedical devices. Proceedings of the 2024 E-Health and Bioengineering Conference (EHB), Iasi, Romania. · DOI
  41. Laganà, F., Pullano, S.A., Angiulli, G., and Versaci, M. (2024). Optimized Analytical–Numerical Procedure for Ultrasonic Sludge Treatment for Agricultural Use. Algorithms, 17. · DOI
  42. Ukiwe, 2023, Techniques of infrared thermography for condition monitoring of electrical power equipment, J. Electr. Syst. Inf. Technol., 10, 49, 10.1186/s43067-023-00115-z · DOI
  43. Wahlquist, S., and Ali, A. (2024). Roles of Modeling and Artificial Intelligence in LPBF Metal Print Defect Detection: Critical Review. Appl. Sci., 14. · doi:10.3390/app14188534
  44. Varvari, A.A., Pitilakis, A., Karatzidis, D.I., and Kantartzis, N.V. (2024). Thyroid Screening Techniques via Bioelectromagnetic Sensing: Imaging Models and Analytical and Computational Methods. Sensors, 24. · doi:10.3390/s24186104
  45. Dritsa, V., Orazi, N., Yao, Y., Paoloni, S., Koui, M., and Sfarra, S. (2022). Thermographic Imaging in Cultural Heritage: A Short Review. Sensors, 22. · doi:10.3390/s22239076
  46. Yang, 2024, Recent advances in fault diagnosis techniques for photovoltaic systems: A critical review, Prot. Control Mod. Power Syst., 9, 36, 10.23919/PCMP.2023.000583 · DOI
  47. Zhang, 2025, Biomimetic Intelligent Thermal Management Materials: From Nature-Inspired Design to Machine-Learning-Driven Discovery, Adv. Mater., 37, 2503140, 10.1002/adma.202503140 · DOI
  48. Zhao, X., Zhao, Y., Hu, S., Wang, H., Zhang, Y., and Ming, W. (2023). Progress in Active Infrared Imaging for Defect Detection in the Renewable and Electronic Industries. Sensors, 23. · DOI
  49. Barraz, Z., Sebari, I., Ait El Kadi, K., and Ait Abdelmoula, I. (2025). Towards a Holistic Approach for UAV-Based Large-Scale Photovoltaic Inspection: A Review on Deep Learning and Image Processing Techniques. Technologies, 13. · DOI
  50. Wilson, 2023, Recent advances in thermal imaging and its applications using machine learning: A review, IEEE Sens. J., 23, 3395, 10.1109/JSEN.2023.3234335 · DOI · Paper page
  51. Hu, S., Li, F., and Zuo, P. (2023). Numerical Simulation of Laser Transmission Welding—A Review on Temperature Field, Stress Field, Melt Flow Field, and Thermal Degradation. Polymers, 15. · doi:10.3390/polym15092125
  52. Raza, 2025, Integration of response surface methodology (RSM), machine learning (ML), and artificial intelligence (AI) for enhancing properties of polymeric nanocomposites-A review, Polym. Compos., 46, 13591, 10.1002/pc.30011 · DOI
  53. Panico, M., and Boccarusso, L. (2025). Smart Drilling: Integrating AI for Process Optimisation and Quality Enhancement in Manufacturing. J. Manuf. Mater. Process., 9. · DOI
  54. Morales Matamoros, O., Takeo Nava, J.G., Moreno Escobar, J.J., and Ceballos Chávez, B.A. (2025). Artificial Intelligence for Quality Defects in the Automotive Industry: A Systemic Review. Sensors, 25. · DOI
  55. Sasithradevi, 2025, Advanced thermal vision techniques for enhanced fault diagnosis in electrical equipment: A review, Int. J. Syst. Assur. Eng. Manag., 16, 1914, 10.1007/s13198-025-02782-9 · DOI
  56. Zhu, 2024, Enabling intelligent connectivity: A survey of secure ISAC in 6g networks, IEEE Commun. Surv. Tutor., 27, 748, 10.1109/COMST.2024.3432871 · DOI · Paper page
  57. Ruffolo, S.A., La Russa, M.F., Rovella, N., and Ricca, M. (2023). The Impact of Air Pollution on Stone Materials. Environments, 10. · DOI
  58. Tai, J.L., Sultan, M.T.H., Łukaszewicz, A., Józwik, J., Oksiuta, Z., and Shahar, F.S. (2025). Recent Trends in Non-Destructive Testing Approaches for Composite Materials: A Review of Successful Implementations. Materials, 18. · DOI
  59. Poncetti, B.L., Ruiz, D.V., Assis, L.S.d., Machado, L.B., Silva, T.B.d., Akinlalu, A.A., and Futai, M.M. (2025). Tunnel Inspection Review: Normative Practices and Non-Destructive Method Advancements for Tunnels with Concrete Cover. Appl. Mech., 6. · DOI
  60. Boldrin, 2024, Review of Ground Penetrating Radar Applications for Bridge Infrastructures, NDT, 2, 53, 10.3390/ndt2010004 · doi:10.3390/ndt2010004
  61. Shen, X., Lu, X., Guo, J., Liu, Y., Qi, J., and Lv, Z. (2024). Nondestructive Testing of Metal Cracks: Contemporary Methods and Emerging Challenges. Crystals, 14. · DOI
  62. Abhisheka, 2024, Recent trend in medical imaging modalities and their applications in disease diagnosis: A review, Multimed. Tools Appl., 83, 43035, 10.1007/s11042-023-17326-1 · DOI · Paper page
  63. Potentas-Policewicz, M., and Fijolek, J. (2024). Granulomatosis with polyangiitis: Clinical characteristics and updates in diagnosis. Front. Med., 11. · DOI
  64. Li, 2023, 3D LiDAR and multi-technology collaboration for preservation of built heritage in China: A review, Int. J. Appl. Earth Obs. Geoinf., 116, 103156
  65. Galantucci, 2023, Condition Assessment of Heritage Buildings via Photogrammetry: A Scoping Review from the Perspective of Decision Makers, Heritage, 6, 7031, 10.3390/heritage6110367 · DOI
  66. Ye, 2025, Application of spectroscopy technique in cultural heritage: Systematic review and bibliometric analysis, npj Herit. Sci., 13, 169, 10.1038/s40494-025-01622-0 · DOI
  67. Sutherland, N., Marsh, S., Priestnall, G., Bryan, P., and Mills, J. (2023). InfraRed Thermography and 3D-Data Fusion for Architectural Heritage: A Scoping Review. Remote Sens., 15. · DOI
  68. Rossi, M., and Bournas, D. (2023). Structural Health Monitoring and Management of Cultural Heritage Structures: A State-of-the-Art Review. Appl. Sci., 13. · DOI
  69. Yogurtcu, B., Cebi, N., Koçer, A.T., and Erarslan, A. (2024). A Review of Non-Destructive Raman Spectroscopy and Chemometric Techniques in the Analysis of Cultural Heritage. Molecules, 29. · DOI
  70. Sadaf, M., Bragaglia, M., Slemenik Perše, L., and Nanni, F. (2024). Advancements in Metal Additive Manufacturing: A Comprehensive Review of Material Extrusion with Highly Filled Polymers. J. Manuf. Mater. Process., 8. · DOI
  71. Wang, W., Chen, J., Han, G., Shi, X., and Qian, G. (2024). Application of Object Detection Algorithms in Non-Destructive Testing of Pressure Equipment: A Review. Sensors, 24. · DOI
  72. Grujić, K. (2023). A Review of Thermal Spectral Imaging Methods for Monitoring High-Temperature Molten Material Streams. Sensors, 23. · DOI
  73. Wang, 2023, Recent research progress on the passivation and selective oxidation for the 3d-transition-metal and refractory multi-principal element alloys, npj Mater. Degrad., 7, 86, 10.1038/s41529-023-00410-0 · DOI
  74. Mohsin, M., Rovetta, S., Masulli, F., and Cabri, A. (2025). Artificial Intelligence Approach for Waste-Printed Circuit Board Recycling: A Systematic Review. Computers, 14. · DOI
  75. Khonina, S.N., Kazanskiy, N.L., Oseledets, I.V., Khabibullin, R.M., and Nikonorov, A.V. (2025). Eyes of the Future: Decoding the World Through Machine Vision. Technologies, 13. · DOI
  76. Kim, H., Lamichhane, N., Kim, C., and Shrestha, R. (2023). Innovations in Building Diagnostics and Condition Monitoring: A Comprehensive Review of Infrared Thermography Applications. Buildings, 13. · DOI
  77. Pratticò, D., and Laganà, F. (2025). Infrared Thermographic Signal Analysis of Bioactive Edible Oils Using CNNs for Quality Assessment. Signals, 6. · DOI
  78. Liu, 2024, Topological thermal transport, Nat. Rev. Phys., 6, 554, 10.1038/s42254-024-00745-w · DOI
  79. Harrison, 2023, Physics of gases, Anaesth. Intensive Care Med., 24, 772, 10.1016/j.mpaic.2023.09.005 · doi:10.1016/j.mpaic.2023.09.005
  80. Verzicco, 2023, Immersed boundary methods: Historical perspective and future outlook, Annu. Rev. Fluid Mech., 55, 129, 10.1146/annurev-fluid-120720-022129 · DOI · Paper page
  81. Lei, 2023, Recent advances in thermoregulatory clothing: Materials, mechanisms, and perspectives, ACS Nano, 17, 1803, 10.1021/acsnano.2c10279 · DOI · Paper page
  82. Hisam, 2024, The versatility of the Taguchi method: Optimizing experiments across diverse disciplines, J. Stat. Theory Appl., 23, 365, 10.1007/s44199-024-00093-9 · doi:10.1007/s44199-024-00093-9
  83. 2025, Parametric optimisation of a pulmonary ventilator using the Taguchi method, J. Electr. Eng., 76, 265, 10.2478/jee-2025-0027 · DOI
  84. Vrbin, 2022, Parametric or nonparametric statistical tests: Considerations when choosing the most appropriate option for your data, Cytopathology, 33, 663, 10.1111/cyt.13174 · DOI
  85. Oviedo, 2024, ISO/IEC quality standards for AI engineering, Comput. Sci. Rev., 54, 100681, 10.1016/j.cosrev.2024.100681 · DOI
  86. Jahanbani, 2024, Data-driven artificial intelligence-based streamflow forecasting, a review of methods, applications, and tools, JAWRA J. Am. Water Resour. Assoc., 60, 1095, 10.1111/1752-1688.13229 · DOI
  87. Khuat, T.T., Bassett, R., Otte, E., Grevis-James, A., and Gabrys, B. (2023). Applications of machine learning in biopharmaceutical process development and manufacturing: Current trends, challenges, and opportunities. arXiv. · DOI
  88. Ulusoy, U. (2023). A Review of Particle Shape Effects on Material Properties for Various Engineering Applications: From Macro to Nanoscale. Minerals, 13. · DOI · Paper page
  89. Maltoni, D., Maio, D., Jain, A.K., and Feng, J. (2022). Fingerprint sensing. Handbook of Fingerprint Recognition, Springer. · doi:10.1007/978-3-030-83624-5

Cited by

Metadata

Authors
Laganà, F., Pratticò, D., Quattrone, M. F., Pullano, S. A., & Calcagno, S.
Venue
Eng
Publisher
MDPI AG
Published
2026-01-06
Volume
7
Issue
1
Pages
28
ISSN
2673-4117
Cited by
33
References
0
Language
en

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.