Function of Nanomaterials in Removing Heavy Metals for Water and Wastewater Remediation: A Review
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Although heavy metals are typically found in trace levels in natural waterways, most of them are hazardous to human health and the environment, even at extremely low concentrations. Nanotechnology and nanomaterials have gained great attention among researchers as a sustainable route to addressing water pollution. Researchers focus on developing novel nanomaterials that are cost-effective for use in water/wastewater remediation. A wide range of adsorbed nanomaterials have been fabricated based on different forms of natural materials, such as carbonaceous nanomaterials, zeolite, natural polymers, magnetic materials, metal oxides, metallic materials, and silica. Hence, this review set out to address the ability of various synthesized nanoadsorbent materials to remove different heavy metal ions from water and wastewater and to investigate the influence of the functionalization of nanomaterials on their adsorption capacity and separation process. Additionally, the effect of experimental variables, such as pH, initial ion concentration, adsorbent dose, contact time, temperature, and ionic strength, on the removal of metal ions has been discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of heavy metal ions from wastewater: a comprehensive and critical review
Qasem, N. A. A., Mohammed, R. H., & Lawal, D. U. (2021) · npj Clean Water · doi:10.1038/s41545-021-00127-0 · Cited by 2,225 · cited 1×
“Activated carbon, metal oxides, and others are often employed as adsorbents for heavy metal ion removal [15].”
BackgroundYang, X., Wan, Y., Zheng, Y., He, F., Yu, Z., Huang, J., Wang, H., Ok, Y. S., Jiang, Y., & Gao, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.119 · Cited by 1,527 · cited 2×
“The surface functional groups of the CNTs (e.g., carboxyl, hydroxyl, and phenol) adsorb the metal ions and, consequently, release the H + from the surface, which causes a decrease in the pH value of water [28,47,50].”
BackgroundNovel biofiltration methods for the treatment of heavy metals from industrial wastewater
Srivastava, N. K., & Majumder, C. B. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.09.101 · Cited by 795
Sprynskyy, M., Buszewski, B., Terzyk, A. P., & Namieśnik, J. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.07.068 · Cited by 660 · cited 1×
“Sprynskyy et al. carried out the sorption using the natural zeolites (clinoptilolite) to remove the heavy metals (Ni 2+ , Cu 2+ , Pb 2+ , and Cd 2+ ) [71].”
MethodHayati, B., Maleki, A., Najafi, F., Gharibi, F., McKay, G., Gupta, V. K., Harikaranahalli Puttaiah, S., & Marzban, N. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.03.172 · Cited by 268
Dayana Priyadharshini, S., Suresh Babu, P., Manikandan, S., Subbaiya, R., Govarthanan, M., & Karmegam, N. (2021) · Environmental Pollution · doi:10.1016/j.envpol.2021.117989 · Cited by 232 · cited 1×
“Even though they can remove various pollutants from wastewater, these technologies have some drawbacks (high cost, process complexity, low efficiency, and so on) [10].”
BackgroundAlharbi, N. S., Hu, B., Hayat, T., Rabah, S. O., Alsaedi, A., Zhuang, L., & Wang, X. (2020) · Frontiers of Chemical Science and Engineering · doi:10.1007/s11705-020-1923-z · Cited by 196
Rad, L. R., Momeni, A., Ghazani, B. F., Irani, M., Mahmoudi, M., & Noghreh, B. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.06.066 · Cited by 178 · cited 2×
“Moreover, oxidation causes an increase in cation exchange capacity of CNTs by inducing the negative charges on their surface [52].”
BackgroundAghel, B., Mohadesi, M., Gouran, A., & Razmegir, M. H. (2020) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-019-02466-5 · Cited by 44 · cited 1×
“The surface oxidation of CNTs enhances the metal adsorption and substantially exceeds the adsorption capacities of CNTs over activated carbons [51].”
Background
Cited by
Zhang, P., Yang, M., Lan, J., Huang, Y., Zhang, J., Huang, S., Yang, Y., & Ru, J. (2023) · Toxics · doi:10.3390/toxics11100828 · Cited by 360
Saleh, T. A. (2024) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2024.101231 · Cited by 105
A comprehensive review of nanomaterials for efficient heavy metal ions removal in water treatment
Feisal, N. A. S., Kamaludin, N. H., Ahmad, M. A., & Tengku Ibrahim, T. N. B. (2024) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2024.105566 · Cited by 68
Current Perspectives of Nanomaterials in Wastewater Treatment for Sustainable Environment
Dullah, S., Gogoi, R., Bhattacharyya, P. N., Borah, D., Kumari, R., Das, J., & Bora, S. S. (2025) · Advances in Wastewater Research · doi:10.1007/978-981-96-3908-3_17 · Cited by 3
Metadata
- Authors
- Ethaib, S., Al-Qutaifia, S., Al-Ansari, N., & Zubaidi, S. L.
- Venue
- Environments
- Publisher
- MDPI AG
- Published
- 2022-09-25
- Volume
- 9
- Issue
- 10
- Pages
- 123
- ISSN
- 2076-3298 (ISSN-L)
- OpenAlex
- W4297198334
- Cited by
- 119
- References
- 9
- FWCI
- 6.13
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.