The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Corn and Rice Starch-Based Bio-Plastics as Alternative Packaging Materials
Open accessAbstract
Due to the negative environmental impacts of synthetic plastics, the development of biodegradable plastics for both industrial and commercial applications is essential today. Researchers have developed various starch-based composites for different applications. The present work investigates the corn and rice starch-based bioplastics for packaging applications. Various samples of bioplastics are produced, with different compositions of corn and rice starch, glycerol, citric acid, and gelatin. The tensile properties were improved after adding rice starch. However, water absorption and water solubility were reduced. On the basis of these results, the best sample was analyzed for thickness testing, biodegradability properties, SEM, hydrophilicity, thermogravimetric analysis, and sealing properties of bioplastic. The results show the suitability of rice and corn-based thermoplastic starch for packaging applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biodegradable polymers for food packaging: a review
Siracusa, V., Rocculi, P., Romani, S., & Rosa, M. D. (2008) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2008.07.003 · Cited by 2,126
Biodegradation of bioplastics in natural environments
Emadian, S. M., Onay, T. T., & Demirel, B. (2017) · Waste Management · doi:10.1016/j.wasman.2016.10.006 · Cited by 1,168
Edible films and coatings: Structures, active functions and trends in their use
Falguera, V., Quintero, J. P., Jiménez, A., Muñoz, J. A., & Ibarz, A. (2011) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2011.02.004 · Cited by 939
Natural fiber reinforced polylactic acid composites: A review
Siakeng, R., Jawaid, M., Ariffin, H., Sapuan, S. M., Asim, M., & Saba, N. (2019) · Polymer Composites · doi:10.1002/pc.24747 · Cited by 524
Self-citationFunctional properties of chitosan-based films
Leceta, I., Guerrero, P., & de la Caba, K. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.04.031 · Cited by 494
Ghanbarzadeh, B., Almasi, H., & Entezami, A. A. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.10.016 · Cited by 483
Ghasemlou, M., Aliheidari, N., Fahmi, R., Shojaee-Aliabadi, S., Keshavarz, B., Cran, M. J., & Khaksar, R. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.07.026 · Cited by 404
Fakhouri, F. M., Martelli, S. M., Caon, T., Velasco, J. I., & Mei, L. H. I. (2015) · Postharvest Biology and Technology · doi:10.1016/j.postharvbio.2015.05.015 · Cited by 358
Johansson, C., Bras, J., Mondragon, I., Nechita, P., Plackett, D., Šimon, P., Gregor Svetec, D., Virtanen, S., Giacinti Baschetti, M., Breen, C., et al. (2012) · BioResources · doi:10.15376/biores.7.2.2506-2552 · Cited by 327
Schirmer, M., Höchstötter, A., Jekle, M., Arendt, E., & Becker, T. (2013) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2012.11.032 · Cited by 302
Bioplastics and food packaging: A review
Jabeen, N., Majid, I., & Nayik, G. A. (2015) · Cogent Food & Agriculture · doi:10.1080/23311932.2015.1117749 · Cited by 288
Song, X., Zuo, G., & Chen, F. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.09.114 · Cited by 283
Kavoosi, G., Dadfar, S. M. M., & Purfard, A. M. (2013) · Journal of Food Science · doi:10.1111/1750-3841.12015 · Cited by 240
Gelatinization and Solubility of Corn Starch during Heating in Excess Water: New Insights
Ratnayake, W. S., & Jackson, D. S. (2006) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf0529114 · Cited by 234
Reducing water absorption in compostable starch-based plastics
Gáspár, M., Benkő, Z., Dogossy, G., Réczey, K., & Czigány, T. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.03.012 · Cited by 228
Development and characterization of sugar palm starch and poly(lactic acid) bilayer films
Sanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.03.051 · Cited by 197
Self-citationStarch Based Bio-Plastics: The Future of Sustainable Packaging
Gadhave, R. V., Das, A., Mahanwar, P. A., & Gadekar, P. T. (2018) · Open Journal of Polymer Chemistry · doi:10.4236/ojpchem.2018.82003 · Cited by 196
Comparative study of processing methods for starch/gelatin films
Fakhouri, F. M., da Costa, D. L. M. G., Yamashita, F., Martelli, S. M., de Jesus, R. C., Allganer, K., Collares‐Queiroz, F. P., & Mei, L. H. I. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.03.027 · Cited by 194
Edhirej, A., Sapuan, S. M., Jawaid, M., & Zahari, N. I. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.03.045 · Cited by 193
Self-citationDirect Transformation of Edible Vegetable Waste into Bioplastics
Bayer, I. S., Guzman-Puyol, S., Heredia-Guerrero, J. A., Ceseracciu, L., Pignatelli, F., Ruffilli, R., Cingolani, R., & Athanassiou, A. (2014) · Macromolecules · doi:10.1021/ma5008557 · Cited by 179
Wang, H., Sun, X., & Seib, P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10457 · Cited by 170
Sugar Palm Starch-Based Composites for Packaging Applications
Sanyang, M. L., Ilyas, R. A., Sapuan, S. M., & Jumaidin, R. (2017) · Springer eBooks · doi:10.1007/978-3-319-67319-6_7 · Cited by 167
Gelation mechanism and rheological properties of rice starch.
Lii, C., Shao, Y., & Tseng, K.-H. (1995) · Cereal Chemistry · Cited by 163
Biosynthesis of planet friendly bioplastics using renewable carbon source
Jain, R., & Tiwari, A. (2015) · Journal of Environmental Health Science and Engineering · doi:10.1186/s40201-015-0165-3 · Cited by 137
Robust and Biodegradable Elastomers Based on Corn Starch and Polydimethylsiloxane (PDMS)
Ceseracciu, L., Heredia‐Guerrero, J. A., Dante, S., Athanassiou, A., & Bayer, I. S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am508515z · Cited by 128
Salarbashi, D., Tajik, S., Ghasemlou, M., Shojaee‐Aliabadi, S., Noghabi, M. S., & Khaksar, R. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.07.031 · Cited by 106
Biodegradation Studies of Polyvinyl Alcohol/Corn Starch Blend Films in Solid and Solution Media
Azahari, N. A., Othman, N. A., & Ismail, H. (2011) · Cited by 104
Cassava: Its polymer, fiber, composite, and application
Edhirej, A., Sapuan, S. M., Jawaid, M., & Zahari, N. I. (2015) · Polymer Composites · doi:10.1002/pc.23614 · Cited by 67
Self-citationHydroxypropylation improves film properties of high amylose corn starch
Kim, H. Y., Jane, J., & Lamsal, B. P. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.10.025 · Cited by 67
Improvement of mechanical and water absorption properties of plant protein based bioplastics
Gómez‐Heincke, D., Martínez, I., Stading, M., Gallegos, C., & Partal, P. (2017) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2017.06.022 · Cited by 64
Li, Y., Ceylan, M., Shrestha, B., Wang, H., Lu, Q. R., Asmatulu, R., & Yao, L. (2013) · Biomacromolecules · doi:10.1021/bm401558c · Cited by 63
Thermal properties of coir and pineapple leaf fibre reinforced polylactic acid hybrid composites
Siakeng, R., Jawaid, M., Ariffin, H., & Sapuan, S. M. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/368/1/012019 · Cited by 55
Self-citationEffect of Mixing Temperature on Characteristics of Thermoplastic Potato Starch Film
Zakaria, N. H., Muhammad, N. B., Sandu, A. V., & Abdullah, M. M. A. B. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/374/1/012083 · Cited by 15
Research works printed but not linked: 18
- Muscat, 2012, Comparative study of film forming behaviour of low and high amylose starches using glycerol and xylitol as plasticizers, J. Food Eng., 109, 189, 10.1016/j.jfoodeng.2011.10.019 · doi:10.1016/j.jfoodeng.2011.10.019
- Abidin, 2015, Fabrication and properties of chitosan with starch for packaging application, Malays. J. Anal. Sci., 19, 1032
- Edhirej, 2017, Effect of various plasticizers and concentration on the physical, thermal, mechanical, and structural properties of cassava-starch-based films, Starch-Stärke, 69, 1500366, 10.1002/star.201500366 · doi:10.1002/star.201500366
- Edhirej, 2017, Preparation and characterization of cassava bagasse reinforced thermoplastic cassava starch, Fibers Polym., 18, 162, 10.1007/s12221-017-6251-7 · doi:10.1007/s12221-017-6251-7
- Edhirej, 2017, Tensile, Barrier, Dynamic Mechanical, and Biodegradation Properties of Cassava/Sugar Palm Fiber Reinforced Cassava Starch Hybrid Composites, BioResources, 12, 7145, 10.15376/biores.12.4.7145-7160 · doi:10.15376/biores.12.4.7145-7160
- Edhirej, 2018, Preparation and Characterization of Cassava Starch/Peel Composite Film, Polym. Compos., 39, 1704, 10.1002/pc.24121 · doi:10.1002/pc.24121
- Sanyang, 2016, Effect of sugar palm-derived cellulose reinforcement on the mechanical and water barrier properties of sugar palm starch biocomposite films, BioResources, 11, 4134, 10.15376/biores.11.2.4134-4145 · doi:10.15376/biores.11.2.4134-4145
- Sanyang, 2017, Tea Tree (Melaleuca alternifolia) Fiber as Novel Reinforcement Material for Sugar Palm Biopolymer Based Composite Films, BioResources, 12, 3751, 10.15376/biores.12.2.3751-3765 · doi:10.15376/biores.12.2.3751-3765
- Young, A.H. (1984). Fractionation of starch. Starch: Chemistry and Technology (Second Edition), Elsevier. · doi:10.1016/b978-0-12-746270-7.50014-8
- Borges, 2015, Influence of different starch sources and plasticizers on properties of biodegradable films, Int. Food Res. J., 22, 2346
- Podshivalov, 2017, Gelatin/potato starch edible biocomposite films: Correlation between morphology and physical properties, Carbohydr. Polym., 157, 1162, 10.1016/j.carbpol.2016.10.079 · doi:10.1016/j.carbpol.2016.10.079
- Kulshreshtha, 2017, Corncrete: A corn starch based building material, Constr. Build. Mater., 154, 411, 10.1016/j.conbuildmat.2017.07.184 · doi:10.1016/j.conbuildmat.2017.07.184
- Luchese, 2018, Development and characterization of cassava starch films incorporated with blueberry pomace, Int. J. Biol. Macromol., 106, 834, 10.1016/j.ijbiomac.2017.08.083 · doi:10.1016/j.ijbiomac.2017.08.083
- Zhang, R., Wang, X., and Cheng, M. (2018). Preparation and Characterization of Potato Starch Film with Various Size of Nano-SiO2. Polymers, 10. · doi:10.3390/polym10101172
- Larotonda, 2004, Biodegradable films made from raw and acetylated cassava starch, Braz. Arch. Biol. Technol., 47, 477, 10.1590/S1516-89132004000300019 · doi:10.1590/s1516-89132004000300019
- Woggum, 2014, Properties and characteristics of dual-modified rice starch based biodegradable films, Int. J. Biol. Macromol., 67, 490, 10.1016/j.ijbiomac.2014.03.029 · doi:10.1016/j.ijbiomac.2014.03.029
- Fakhouri, 2007, Films and edible coatings based on native starches and gelatin in the conservation and sensory acceptance of Crimson gra, Food Sci. Technol., 27, 369, 10.1590/S0101-20612007000200027 · doi:10.1590/s0101-20612007000200027
- Martelli, 2012, Chicken feather keratin films plasticized with polyethylene glycol, Int. J. Polym. Mater., 61, 17, 10.1080/00914037.2011.557809 · doi:10.1080/00914037.2011.557809
Cited by
Recent advances in the sustainable design and applications of biodegradable polymers
Rai, P., Mehrotra, S., Priya, S., Gnansounou, E., & Sharma, S. K. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.124739 · Cited by 452
Bio-sourced polymers as alternatives to conventional food packaging materials: A review
Sid, S., Mor, R. S., Kishore, A., & Sharanagat, V. S. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.06.026 · Cited by 387
Plastics degradation by microbes: A sustainable approach
Zeenat, Elahi, A., Bukhari, D. A., Shamim, S., & Rehman, A. (2021) · Journal of King Saud University - Science · doi:10.1016/j.jksus.2021.101538 · Cited by 347
Thermal stability of natural fibers and their polymer composites
Asim, M., Paridah, M. T., Chandrasekar, M., Shahroze, R. M., Jawaid, M., Nasir, M., & Siakeng, R. (2020) · Iranian Polymer Journal · doi:10.1007/s13726-020-00824-6 · Cited by 345
Self-citationMori, R. (2023) · RSC Sustainability · doi:10.1039/d2su00014h · Cited by 335
Metadata
- Authors
- Marichelvam, M. K., Jawaid, M., & Asim, M.
- Venue
- Fibers
- Publisher
- MDPI AG
- Published
- 2019-04-09
- Volume
- 7
- Issue
- 4
- Pages
- 32
- ISSN
- 2079-6439 (ISSN-L)
- OpenAlex
- W2938364377
- Cited by
- 423
- References
- 33
- FWCI
- 10.11
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.