Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.

Spray Analysis and Combustion Assessment of Diesel-LPG Fuel Blends in Compression Ignition Engine

Open access

Abstract

A major challenge for internal combustion engines (ICEs), and diesel engines, in particular, is the reduction of exhaust emissions, essentially nitrogen oxides (NOx) and particulate matter (PM). In this regard, the potential of LPG-diesel blends was evaluated in this work. The LPG and diesel blends were externally prepared by exploiting their perfect miscibility at high pressures. Two diesel-LPG mixtures with 20% and 35% by mass LPG concentrations were tested. In terms of spatial and temporal evolution, the spray characterization was performed for the two blends and pure diesel fuel through high-speed imaging technique. The combustion behavior, engine performance and exhaust emissions of LPG-diesel blends were evaluated through a test campaign carried out on a single-cylinder diesel engine. Diesel/LPG sprays penetrate less than pure diesel. This behavior results from a lower momentum, surface tension and viscosity, of the blend jets in comparison to diesel which guarantee greater atomization. The addition of LPG to diesel tends to proportionally increase the spray cone angle, due to the stronger turbulent flow interaction caused by, the lower density and low flash-boiling point. Because of improved atomization and mixing during the injection phase, the blends have shown great potential in reducing PM emissions, without affecting engine performance (CO2 emissions). The addition of LPG resulted in a significant smoke reduction (about 95%) with similar NOx emissions and acceptable THC and CO emissions. Furthermore, the low cetane number (CN) and high low-heating value (LHV) ensuring leaner air-fuel mixture, and improvements in terms of efficiency, particularly for a blend with a higher concentration of LPG.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/fuels2010001

Cites

34 of 34 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 34 references

Research works printed but not linked: 1

  1. Heywood, J.B. (1988). Internal Combustion Engine Fundamentals, McGraw-Hill.

Cited by

See all 16

Metadata

Authors
Cardone, M., Marialto, R., Ianniello, R., Lazzaro, M., & Di Blasio, G.
Affiliations
  • University of Naples Federico II (IT)
  • National Research Council (IT)
  • CNR–STEMS, Viale Marconi, 4, 80125 Naples, Italy
Corresponding author
Marialto, Renato
Venue
Fuels
Publisher
MDPI AG
Published
2020-12-31
Volume
2
Issue
1
Pages
1-15
ISSN
2673-3994 (ISSN-L)
OpenAlex
W3118173698
Cited by
15
References
34
Citations by year
2026: 2 · 2025: 3 · 2023: 4 · 2022: 4 · 2021: 2
FWCI
1.19
Type
journal article
Language
en
Open access
Locations
Fuels (publishedVersion, cc-by)
Topics
  • Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Advanced Combustion Engine Technologies
  • Physical Sciences › Engineering › Automotive Engineering › Engine and Fuel Emissions
  • Physical Sciences › Energy › Fuel Technology › Biodiesel Production and Applications
Keywords
spray characterization, atomization, spray angle, combustion characteristics, vehicle emissions, particulate matter reduction, NOx emissions, high-speed imaging, compression ignition engine, cetane number, lower heating value, engine efficiency

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Spray Analysis and Combustion Assessment of Diesel-LPG Fuel Blends in Compression Ignition Engine. https://app.cochat.ai/papers/10.3390/fuels2010001
The paper
Cardone, M., Marialto, R., Ianniello, R., Lazzaro, M., & Di Blasio, G. (2020). Spray Analysis and Combustion Assessment of Diesel-LPG Fuel Blends in Compression Ignition Engine. Fuels. https://doi.org/10.3390/fuels2010001

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.