CoChat

The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.

Effect of a Simulated Heat Wave on Physiological Strain and Labour Productivity

Open access
Ioannou, Leonidas G., Mantzios, Konstantinos, Tsoutsoubi, Lydia, Panagiotaki, Zoe, Kapnia, Areti K., Ciuha, Ursa, Nybo, Lars, Flouris, Andreas D., Mekjavic, Igor B. · 2021 · International Journal of Environmental Research and Public Health

Abstract

Background: The aim of the study was to investigate the effect of a simulated heat-wave on the labour productivity and physiological strain experienced by workers. Methods: Seven males were confined for ten days in controlled ambient conditions. A familiarisation day was followed by three (pre, during, and post-heat-wave) 3-day periods. During each day volunteers participated in a simulated work-shift incorporating two physical activity sessions each followed by a session of assembly line task. Conditions were hot (work: 35.4 °C; rest: 26.3 °C) during, and temperate (work: 25.4 °C; rest: 22.3 °C) pre and post the simulated heat-wave. Physiological, biological, behavioural, and subjective data were collected throughout the study. Results: The simulated heat-wave undermined human capacity for work by increasing the number of mistakes committed, time spent on unplanned breaks, and the physiological strain experienced by the participants. Early adaptations were able to mitigate the observed implications on the second and third days of the heat-wave, as well as impacting positively on the post-heat-wave period. Conclusions: Here, we show for first time that a controlled simulated heat-wave increases workers’ physiological strain and reduces labour productivity on the first day, but it promotes adaptations mitigating the observed implications during the subsequent days.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ijerph18063011

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure A1 Determining the clothing insulation of the work coveralls used in our study using a thermal manikin.
Figure A1 Determining the clothing insulation of the work coveralls used in our study using a thermal manikin.CC BY · PubMed Central
Figure A2 This figure depicts the software-generated printed circuit board (left panel) and multimeter (right panel) used in our simulated assembly line task. Using the movable red probe (shown on the circuit board), participants were required to test the values of resistances, by placing the tool on the orange circles. The values of the resistance were displayed on the multimeter. Based on the values of the resistances, participants have several options, as described in the text. The software is freely available after contacting the corresponding author.
Figure A2 This figure depicts the software-generated printed circuit board (left panel) and multimeter (right panel) used in our simulated assembly line task. Using the movable red probe (shown on the circuit board), participants were required to test the values of resistances, by placing the tool on the orange circles. The values of the resistance were displayed on the multimeter. Based on the values of the resistances, participants have several options, as described in the text. The software is freely available after contacting the corresponding author.CC BY · PubMed Central
Figure A3 Simulated assembly line task being conducted during the heat-wave.
Figure A3 Simulated assembly line task being conducted during the heat-wave.CC BY · PubMed Central
Figure 1 Fluctuation of simulated ambient temperatures throughout the experiment (A) and throughout the day (B). Turquoise, yellow, and red bars represent familiarisation day, pre/post, and during heat-wave periods, respectively. Dark and light colours correspond to the simulated ambient temperatures during work and rest, respectively. Lines represent the two levels (work and rest) of heat stress during (red) and pre/post (yellow) the simulated heat-wave. Work-shifts were scheduled between 08:40 and 18:00. A strict time-framed (wake up: 07:00, breakfast: 08:00, work: 08:40–12:00, lunch: 12:00, work: 12:40–18:00, dinner: 18:20, free time: 19:00–23:00, and sleep: 23:00) protocol was followed. The time periods spent on passive heat exposure (i.e., sitting in the workplace without having work to perform; duration, 5:20), simulated assembly line tasks (SALT; 2 × 60 min), and stepping sessions (2 × 40 min) are distinguished by different shades of grey. The remaining time was dedicated for meals, free time, and sleep in controlled environmental conditions.
Figure 1 Fluctuation of simulated ambient temperatures throughout the experiment (A) and throughout the day (B). Turquoise, yellow, and red bars represent familiarisation day, pre/post, and during heat-wave periods, respectively. Dark and light colours correspond to the simulated ambient temperatures during work and rest, respectively. Lines represent the two levels (work and rest) of heat stress during (red) and pre/post (yellow) the simulated heat-wave. Work-shifts were scheduled between 08:40 and 18:00. A strict time-framed (wake up: 07:00, breakfast: 08:00, work: 08:40–12:00, lunch: 12:00, work: 12:40–18:00, dinner: 18:20, free time: 19:00–23:00, and sleep: 23:00) protocol was followed. The time periods spent on passive heat exposure (i.e., sitting in the workplace without having work to perform; duration, 5:20), simulated assembly line tasks (SALT; 2 × 60 min), and stepping sessions (2 × 40 min) are distinguished by different shades of grey. The remaining time was dedicated for meals, free time, and sleep in controlled environmental conditions.CC BY · PubMed Central
Figure 2 Ambient conditions during the day prior to the heat-wave (left) and the first day of the heat-wave (right). All pictures were taken using the same thermal camera set to be sensitive within a range of 19.9 and 40.0 °C.
Figure 2 Ambient conditions during the day prior to the heat-wave (left) and the first day of the heat-wave (right). All pictures were taken using the same thermal camera set to be sensitive within a range of 19.9 and 40.0 °C.CC BY · PubMed Central
Figure 3 Differences (means ± sd) in thermal strain and labour efficiency during stepping (top graph) and simulated assembly line task (bottom graph) between neutral and hot days. Data are presented as delta (Δ) differences from the pre-heat-wave sleep (sleep time of days 0–2), depicting the increase/decrease in the physiological strain experienced by our participants. Yellow and red bars correspond to the days pre-/post and during the heat-wave, respectively. The first yellow bar (day: 3) represents the average of each variable across the pre-heat-wave period (days 1–3). Grey areas in the background represent the magnitude (%) of difference compared to the pre-heat-wave variables. AU indicates arbitrary units. Cross signs indicate statistically significant differences compared to the pre-heat-wave period, at p < 0.05.
Figure 3 Differences (means ± sd) in thermal strain and labour efficiency during stepping (top graph) and simulated assembly line task (bottom graph) between neutral and hot days. Data are presented as delta (Δ) differences from the pre-heat-wave sleep (sleep time of days 0–2), depicting the increase/decrease in the physiological strain experienced by our participants. Yellow and red bars correspond to the days pre-/post and during the heat-wave, respectively. The first yellow bar (day: 3) represents the average of each variable across the pre-heat-wave period (days 1–3). Grey areas in the background represent the magnitude (%) of difference compared to the pre-heat-wave variables. AU indicates arbitrary units. Cross signs indicate statistically significant differences compared to the pre-heat-wave period, at p < 0.05.CC BY · PubMed Central
Figure 4 Impacts of physiological strain (A), hydration status (B), thermal comfort (C), and thermal sensation (D) on labour productivity, as expressed by physiological strain index, urine specific gravity, and the subjective scales of thermal comfort and thermal sensation, respectively. AU indicates arbitrary units. Red and blue dots represent work during hot (35.4 °C) and neutral (25.4 °C) conditions, respectively. Black dots with their accompanied trendline and 95% CI (shaded area) depict the increase in the number of mistakes committed in electronic circuit boards for every 0.5 points in physiological strain index, 0.004 points in the urine specific gravity scale, and 1 point in the subjective scales of thermal comfort and thermal sensation.
Figure 4 Impacts of physiological strain (A), hydration status (B), thermal comfort (C), and thermal sensation (D) on labour productivity, as expressed by physiological strain index, urine specific gravity, and the subjective scales of thermal comfort and thermal sensation, respectively. AU indicates arbitrary units. Red and blue dots represent work during hot (35.4 °C) and neutral (25.4 °C) conditions, respectively. Black dots with their accompanied trendline and 95% CI (shaded area) depict the increase in the number of mistakes committed in electronic circuit boards for every 0.5 points in physiological strain index, 0.004 points in the urine specific gravity scale, and 1 point in the subjective scales of thermal comfort and thermal sensation.CC BY · PubMed Central
Figure 5 Impacts of core temperature on heart rate (A), mean skin temperature (B), thermal comfort (C), and thermal sensation (D). AU indicates arbitrary units. Red and blue dots represent work during hot (35.4 °C) and neutral (25.4 °C) conditions, respectively. Black dots with their accompanied trendline and 95% CI (shaded area) depict the increase in core temperature for every 20-bpm heart rate, 1 °C mean skin temperature, and 1 point in the subjective scales of thermal comfort and thermal sensation.
Figure 5 Impacts of core temperature on heart rate (A), mean skin temperature (B), thermal comfort (C), and thermal sensation (D). AU indicates arbitrary units. Red and blue dots represent work during hot (35.4 °C) and neutral (25.4 °C) conditions, respectively. Black dots with their accompanied trendline and 95% CI (shaded area) depict the increase in core temperature for every 20-bpm heart rate, 1 °C mean skin temperature, and 1 point in the subjective scales of thermal comfort and thermal sensation.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 36 references

Research works printed but not linked: 2

  1. Masters, G.M. (2013). Renewable and Efficient Electric Power Systems, John Wiley & Sons.
  2. American Conference of Governmental Industrial Hygienists (2012). TLVs and BEIs—Based on the Documentation of the Threshold Limit Values for Chemical Substances and Physical Agents & Biological Exposure Indices, ACGIH.

Cited by

See all 52

Metadata

Authors
Ioannou, L. G., Mantzios, K., Tsoutsoubi, L., Panagiotaki, Z., Kapnia, A. K., Ciuha, U., Nybo, L., Flouris, A. D., & Mekjavic, I. B.
Affiliations
  • University of Thessaly (GR)
  • FAME Laboratory, Department of Physical Education and Sport Science, University of Thessaly, 42131 Trikala, Greece
  • Department of Automation, Biocybernetics and Robotics, Jozef Stefan Institute, 1000 Ljubljana, Slovenia
  • University of Copenhagen (DK)
Corresponding author
Ioannou, Leonidas G.
Venue
International Journal of Environmental Research and Public Health
Publisher
MDPI AG
Published
2021-03-15
Volume
18
Issue
6
Pages
3011
ISSN
1660-4601 (ISSN-L)
OpenAlex
W3136027651
Cited by
51
References
36
Citations by year
2026: 6 · 2025: 7 · 2024: 7 · 2023: 10 · 2022: 10 · 2021: 11
FWCI
6.13
Type
journal article
Language
en
Open access
Locations
  • International Journal of Environmental Research and Public Health (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Research at the University of Copenhagen (University of Copenhagen) (publishedVersion, cc-by)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • University of Thessaly Institutional Repository (University of Thessaly) (submittedVersion)
Funders
Horizon 2020 (Grant agreement no. 668786 (HEAT-SHIELD project))
Topics
  • Health Sciences › Medicine › Physiology (medical) › Thermoregulation and physiological responses
  • Life Sciences › Agricultural and Biological Sciences › Animal Science and Zoology › Effects of Environmental Stressors on Livestock
  • Physical Sciences › Environmental Science › Health, Toxicology and Mutagenesis › Climate Change and Health Impacts
Keywords
heat waves, labor productivity, physiological strain, occupational heat stress, assembly line work, physical activity, work errors, heat acclimation, thermal adaptation
MeSH terms
Body Temperature, Efficiency, Heart Rate, Hot Temperature, Humans, Male, Heat Stress Disorders

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Effect of a Simulated Heat Wave on Physiological Strain and Labour Productivity. https://app.cochat.ai/papers/10.3390/ijerph18063011
The paper
Ioannou, L. G., Mantzios, K., Tsoutsoubi, L., Panagiotaki, Z., Kapnia, A. K., Ciuha, U., Nybo, L., Flouris, A. D., & Mekjavic, I. B. (2021). Effect of a Simulated Heat Wave on Physiological Strain and Labour Productivity. International Journal of Environmental Research and Public Health. https://doi.org/10.3390/ijerph18063011

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.