CoChat

Historical Asbestos Measurements in Denmark—A National Database

Open access

The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.

Abstract

Objectives: Due to the long lag-time for health outcomes, historical asbestos exposure measurements are valuable to support assessments of associated occupational health effects, and also to assess time trends and effects of preventive measures. Methods: Different sources of stored data were collated, assessed and refined to create a harmonized database on historical asbestos fibre concentrations measured in specific work tasks and different industries. The final database contains 9236 asbestos measurements from Danish workplaces collected from 1971 to 1997. Results: The geometric mean of asbestos concentrations in different occupations and tasks ranged from 0.003 to 35 fibres cm−3. Highest concentrations were registered during handling of asbestos products in the construction services during the period 1981–1997. Although all the measured asbestos exposures without the use of respiratory equipment by the worker in the period of 1971–1997 exceeded the current 8-h time-weighted average exposure limit of 0.1 fibres cm−3, the majority of samples collected in the earlier period of 1971 to 1980 did not exceed the exposure limit of 2 fibres cm−3, which was in place at the time. All exposure data obtained from 1980 and onwards were found to be one seventh of the mean fibre concentrations in the previous measurement period. The impact of time shows a clear exponentially decreasing trend-line. Conclusions: Despite limitations in coverage of different occupations and tasks associated with the inventoried historical asbestos measurements, the data are helpful to identify specific work scenarios within an industry, where relatively high asbestos exposure levels may still occur or have occurred from 1971 to 1997.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/ijerph19020643

Cites

31 of 31 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Vertical box plots for the measured personal exposure asbestos concentrations (with N ≥ 4) without respiratory protective equipment being used by the worker (unless specified) for each industry code for the period 1971–1980 and 1981–1997: (a) Manufacturing of asbestos products; (b) Transport, storage and package; (c) Maintenance jobs; (d) General supervision and inspection tasks; and (e) Cleaning activities. The lower and upper limits of the box plots represent the 25th and 75th percentiles, and the line within the box marks the median. Whiskers (error bars) above and below the box indicate the maximum and the minimum fibre concentration excluding high values (marked as *), respectively. N: total number of measurements available; Manuf: manufacturing; Auto: Automotive.
Figure 1 Vertical box plots for the measured personal exposure asbestos concentrations (with N ≥ 4) without respiratory protective equipment being used by the worker (unless specified) for each industry code for the period 1971–1980 and 1981–1997: (a) Manufacturing of asbestos products; (b) Transport, storage and package; (c) Maintenance jobs; (d) General supervision and inspection tasks; and (e) Cleaning activities. The lower and upper limits of the box plots represent the 25th and 75th percentiles, and the line within the box marks the median. Whiskers (error bars) above and below the box indicate the maximum and the minimum fibre concentration excluding high values (marked as *), respectively. N: total number of measurements available; Manuf: manufacturing; Auto: Automotive.CC BY · PubMed Central
Figure 2 Vertical box plots for the measured personal exposure asbestos concentrations (with N ≥ 4) without respiratory protective equipment being used by the worker (unless specified) during active handling of asbestos products in each industry code for the period 1981–1997. The lower and upper limits of the box plots represent the 25th and 75th percentiles, and the line within the box marks the median. Whiskers (error bars) above and below the box indicate the maximum and the minimum fibre concentration, respectively. N: total number of measurements available.
Figure 2 Vertical box plots for the measured personal exposure asbestos concentrations (with N ≥ 4) without respiratory protective equipment being used by the worker (unless specified) during active handling of asbestos products in each industry code for the period 1981–1997. The lower and upper limits of the box plots represent the 25th and 75th percentiles, and the line within the box marks the median. Whiskers (error bars) above and below the box indicate the maximum and the minimum fibre concentration, respectively. N: total number of measurements available.CC BY · PubMed Central
Figure 3 Personal exposure asbestos exposure concentrations against sampled year. The grey and blue lines stand for the log-linear gamma model fit applied for industry sector 36993 and 38439, respectively. All the personal measurements at the asbestos cement plant correspond to exposures without use of RPE, while at the automotive industry it is unknown if RPE was used. Horizontal red lines show the different health guideline values over time. (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article).
Figure 3 Personal exposure asbestos exposure concentrations against sampled year. The grey and blue lines stand for the log-linear gamma model fit applied for industry sector 36993 and 38439, respectively. All the personal measurements at the asbestos cement plant correspond to exposures without use of RPE, while at the automotive industry it is unknown if RPE was used. Horizontal red lines show the different health guideline values over time. (For interpretation of the references to colour in this figure legend, the reader is referred to the web version of this article).CC BY · PubMed Central
Figure 4 Personal exposure asbestos concentrations in each occupational category for the period 1971–1980 or 1981–1997 compared to the current 8-h TWA health guideline value (horizontal dashed line). The white, grey and black dots correspond to minimum, geometric mean (GM) and maximum asbestos concentration, respectively. Concentrations = 0 fibres cm−3 are represented in y = 0.01 with an arrow towards down. All the personal measurements which workers used respiratory protective equipment were taken outside the mask unless specified; *: Mechanical ventilation used from 1977 onwards; a Measurements taken inside the respiratory protective equipment; Manuf.: manufacturer; Const.: construction.
Figure 4 Personal exposure asbestos concentrations in each occupational category for the period 1971–1980 or 1981–1997 compared to the current 8-h TWA health guideline value (horizontal dashed line). The white, grey and black dots correspond to minimum, geometric mean (GM) and maximum asbestos concentration, respectively. Concentrations = 0 fibres cm−3 are represented in y = 0.01 with an arrow towards down. All the personal measurements which workers used respiratory protective equipment were taken outside the mask unless specified; *: Mechanical ventilation used from 1977 onwards; a Measurements taken inside the respiratory protective equipment; Manuf.: manufacturer; Const.: construction.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 5

  1. IARC Asbestos (Chrysotile, Amosite, Crocidolite, Tremolite, Actinolite, and Anthophyllite) (2020, November 26). IARC Work. Gr. Eval. Carcinog. Risks to Humans. Arsenic, Met. Fibres Dusts. Lyon Int. Agency Res. Cancer; 2012. (IARC Monogr. Eval. Carcinog. Risks to Humans, No. 100C.), Available online: https://www.ncbi.nlm.nih.gov/books/NBK304374/.
  2. 2018, Asbest, malignt mesoteliom og lungekræft, Ugeskr. Laeger, 180, 2
  3. Raffn, E. (1990). Kræft og dødsfald i asbestcementindustrien. En kohorteundersøgelse af cancerincidensen og mortaliteten blandt ansatte på Dansk Eternit Fabrik A/S 1928-1984. [Ph.D. Thesis, Copenhagen University].
  4. ECHA (2016). Guidance on Information Requirements and Chemical Safety Assessment Chapter R. 14: Occupational Exposure Assessment, European Chemicals Agency.
  5. Health Effects Institute (1991). Asbestos Research (HEI-AR) Asbestos in Public and Commercial Buildings: A Literature Review and Synthesis of Current Knowledge, Health Effects Institute-Asbestos Research. Report Number 1991-01-01.

Cited by

See all 16

Metadata

Authors
Fonseca, A. S., Jørgensen, A. K., Larsen, B. X., Moser-Johansen, M., Flachs, E. M., Ebbehøj, N. E., Bønløkke, J. H., Østergaard, T. O., Bælum, J., Sherson, D. L., Schlünssen, V., Meyer, H. W., & Jensen, K. A.
Affiliations
  • National Research Centre for the Working Environment (DK)
  • University of Copenhagen (DK)
  • Aalborg University Hospital (DK)
  • Odense University Hospital (DK)
  • Danish Ramazzini Center (DK)
Corresponding author
Fonseca, Ana Sofia
Venue
International Journal of Environmental Research and Public Health
Publisher
MDPI AG
Published
2022-01-06
Volume
19
Issue
2
Pages
643
ISSN
1660-4601 (ISSN-L)
OpenAlex
W4205489331
Cited by
16
References
30
Citations by year
2026: 1 · 2025: 4 · 2024: 4 · 2023: 6 · 2022: 1
FWCI
2.42
Type
journal article
Language
en
Open access
Locations
  • International Journal of Environmental Research and Public Health (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • VBN Forskningsportal (Aalborg Universitet) (submittedVersion, cc-by)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • University of Southern Denmark Research Portal (University of Southern Denmark) (submittedVersion, cc-by)
Funders
Bjørst Memorial Foundation (Not available)
Topics
  • Health Sciences › Medicine › Pulmonary and Respiratory Medicine › Occupational and environmental lung diseases
  • Health Sciences › Medicine › Public Health, Environmental and Occupational Health › Occupational Health and Safety in Workplaces
  • Social Sciences › Health › Occupational Health and Global Justice
Keywords
asbestos exposure, occupational exposure, construction industry, exposure trends, exposure limits, Denmark
MeSH terms
Air Pollutants, Occupational, Asbestos, Denmark, Occupations, Occupational Health, Occupational Exposure

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.