Metal Content in Textile and (Nano)Textile Products
Open accessThe DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Abstract
Metals, metallic compounds, and, recently, metallic nanoparticles appear in textiles due to impurities from raw materials, contamination during the manufacturing process, and/or their deliberate addition. However, the presence of lead, cadmium, chromium (VI), arsenic, mercury, and dioctyltin in textile products is regulated in Europe (Regulation 1907/2006). Metal determination in fabrics was performed by inductively coupled plasma-mass spectrometry (ICP-MS) after microwave-assisted acid digestion. The ICP-MS procedure has been successfully validated; relative standard deviations were up to 3% and analytical recoveries were within the 90–107% range. The developed method was applied to several commercial textiles, and special attention has been focused on textiles with nanofinishing (fabrics prepared with metallic nanoparticles for providing certain functionalities). Arsenic content (in textile T4) and lead content (in subsamples T1-1, T1-2, and T3-3) were found to exceed the maximum limits established by the European Regulation 1907/2006. Although impregnation of yarns with mercury compounds is not allowed, mercury was quantified in fabrics T1-2, T5, and T6. Further speciation studies for determining hexavalent chromium species in sample T9 are necessary (hexavalent chromium is the only species of chromium regulated). Some textile products commercialised in Europe included in this study do not comply with European regulation 1907/2006.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“The mulberry plant accumulated high levels of Cd, and the Cd was transferred into silkworm.”
From Sustainable management of post-phytoremediation biomass (2025) · cites this paper as Rujido-Santos et al. 2022
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Silver nanoparticles as a new generation of antimicrobials
Rai, M., Yadav, A., & Gade, A. (2009) · Biotechnology Advances · doi:10.1016/j.biotechadv.2008.09.002 · Cited by 6,173 · cited 1×
“Finally, several manufacturers of the studied textiles have specified the presence of silver ions or AgNPs in the garments since silver compounds offer biocide properties to the textiles [60].”
BackgroundNanoparticle Silver Released into Water from Commercially Available Sock Fabrics
Benn, T. M., & Westerhoff, P. (2008) · Environmental Science & Technology · doi:10.1021/es7032718 · Cited by 1,710
Dastjerdi, R., & Montazer, M. (2010) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2010.03.029 · Cited by 1,355 · cited 8×
“Moreover, titanium could be present in these samples since they contain totally or partially white fibres (bulk titanium dioxide and TiO2NPs provide brightness and opacifying characteristics).”
BackgroundInfluentialRecent advancements in natural dye applications: a review
Shahid, M., Shahid-ul-Islam, & Mohammad, F. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.03.031 · Cited by 991 · cited 1×
“As example, approximately 80% of leathers are chrome-tanned [1,2], while vanadium, chromium, barium, lead, copper, cobalt, and nickel are used in textile dyeing [3,4], and iron and manganese are used in bleaching processes [5,6].”
BackgroundSynthesis and characterization of zinc oxide nanoparticles: application to textiles as UV-absorbers
Becheri, A., Dürr, M., Lo Nostro, P., & Baglioni, P. (2008) · Journal of Nanoparticle Research · doi:10.1007/s11051-007-9318-3 · Cited by 975 · cited 1×
“Regarding zinc, textiles coded as T1, T2, and T3 were purchased from the same manufacturer who specified that these garments contained ZnONPs (Table 1) to provide UV protection [59].”
BackgroundYetisen, A. K., Qu, H., Manbachi, A., Butt, H., Dokmeci, M. R., Hinestroza, J. P., Skorobogatiy, M., Khademhosseini, A., & Yun, S. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b08176 · Cited by 752 · cited 10×
“Moreover, titanium could be present in these samples since they contain totally or partially white fibres (bulk titanium dioxide and TiO2NPs provide brightness and opacifying characteristics).”
BackgroundInfluentialThe Behavior of Silver Nanotextiles during Washing
Geranio, L., Heuberger, M., & Nowack, B. (2009) · Environmental Science & Technology · doi:10.1021/es9018332 · Cited by 631
Chemical Finishing of Textiles
Schindler, W., Hauser, P., & Hauser, P. (2004) · CRC Press eBooks · doi:10.1201/9781439823477 · Cited by 591
Human skin penetration of silver nanoparticles through intact and damaged skin
Larese, F. F., D’Agostin, F., Crosera, M., Adami, G., Renzi, N., Bovenzi, M., & Maina, G. (2009) · Toxicology · doi:10.1016/j.tox.2008.09.025 · Cited by 439 · cited 1×
“Moreover, recent studies reported possible penetration of metallic NPs through skin, which may pose a risk to human health [27,28].”
BackgroundBozzi, A., Yuranova, T., & Kiwi, J. (2005) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2004.11.010 · Cited by 370
Research works printed but not linked: 2
- Clark, 2011, Metal-complex dyes, Handbook of Textile and Industrial Dyeing: Principles, Processes and Types of Dyes, Volume 1, 446
- Sharma, S.K. (2021). Chapter 5—Removal of dyes and pigments from industrial effluents. Green Chemistry and Water Remediation: Research and Applications, Elsevier.
Cited by
Highly Specialized Textiles with Antimicrobial Functionality—Advances and Challenges
Tanasă, F., Teacă, C., Nechifor, M., Ignat, M.-E., Duceac, I. A., & Ignat, L. (2023) · Textiles · doi:10.3390/textiles3020015 · Cited by 66
“It must be mentioned that a high number of heavy metal species, including copper, zinc, and titanium salts and complexes, could be present in traces to sizeable amounts within the unmodified textile materials, originating from raw materials and processing, but especially from the dyeing steps, which may interfere with…”
BackgroundSustainable management of post-phytoremediation biomass
Mukherjee, S., Leri, A. C., Bandaranayaka, C., Vázquez-Núñez, E., Barros, R., Khan, A. H. A., Zhou, P., Zhang, T., Bernal, M. P., Clemente, R., et al. (2025) · Energy, Ecology and Environment · doi:10.1007/s40974-025-00364-w · Cited by 45
“It sets the permissible limit for As, Cd, Cr (VI), and Pb (and their compounds) in fabric material to not exceed 1 mg metal(loid) kg - 1 fabric (Rujido-Santos et al. 2022).”
Desai, A. S., Singh, A., Edis, Z., Bloukh, S. H., Shah, P., Pandey, B., Agrawal, N., & Bhagat, N. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13020054 · Cited by 44
Zuo, C., Li, Y., Chen, Y., Jiang, J., Qiu, W., & Chen, Q. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.132639 · Cited by 42
Tampons as a source of exposure to metal(loid)s
Shearston, J. A., Upson, K., Gordon, M., Do, V., Balac, O., Nguyen, K. N., Yan, B., Kioumourtzoglou, M., & Schilling, K. (2024) · Environment International · doi:10.1016/j.envint.2024.108849 · Cited by 38
Mast, J., Miert, E. V., Siciliani, L., Cheyns, K., Blaude, M.-N., Wouters, C., Waegeneers, N., Bernsen, R., Vleminckx, C., Loco, J. V., et al. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.161889 · Cited by 25
Clothing as a potential exposure source of trace elements during early life
Herrero, M., Rovira, J., González, N., Marquès, M., Barbosa, F., Sierra, J., Domingo, J. L., Nadal, M., & Souza, M. C. O. (2023) · Environmental Research · doi:10.1016/j.envres.2023.116479 · Cited by 20
Chen, H., Cheng, J., Li, Y., Li, Y., Wang, J., & Tang, Z. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.140165 · Cited by 13
Zhou, L., Li, J., Zhong, M., Zhang, Y., Wang, T., Liu, J., Mei, M., & Chen, S. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.111896 · Cited by 13
Antimony and arsenic detection: review on electrochemical biosensors and their applications
Nithyashree, J. K., Varghese, J., Biju, A., Italiya, G., Sivakumar, N., & Subramanian, S. (2024) · Water Practice & Technology · doi:10.2166/wpt.2024.246 · Cited by 11
Utilization of used textiles for solid recovered fuel production
Dziok, T., Bury, M., Adamczak, J., Palka, J., & Borovec, K. (2024) · Environmental Science and Pollution Research · doi:10.1007/s11356-024-33195-z · Cited by 11
Shanbehbazari, M. S. A., Alihoseini, M., Khani, M. R., Ostovarpour, F., Hosseini, S. I., Jalili, M., & Shokri, B. (2024) · Journal of Industrial Textiles · doi:10.1177/15280837241246110 · Cited by 9
“70 Due to the effect of plasma on desizing, these contaminations are removed after plasma processing or divided into smaller segments due to etching, thus leaving only a small amount of their remains.”
Hazardous chemical elements in cleaning cloths, a potential source of microfibres
Filella, M., Brazard, J., Adachi, T., & Turner, A. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.157419 · Cited by 9
“Clothing textiles tend to utilisemore naturalfibres than cleaning cloths (Rovira et al., 2015, 2017; Herrero et al., 2019) and occasionally use specific additives for functionalisation (e.g., appearance and UV protection; von Goetz et al., 2013; Rujido-Santos et al., 2022).”
BackgroundMethodInfluentialInfluence of RDF Composition on Mercury Release during Thermal Pretreatment
Bury, M., Dziok, T., Borovec, K., & Burmistrz, P. (2023) · Energies · doi:10.3390/en16020772 · Cited by 10
Green dyeing of wool using microwave-assisted anjbar root extract and bio-mordants
Bokhari, T. H., Sabir, K., Adeel, S., Imran, M., & Mia, R. (2025) · Surface Innovations · doi:10.1680/jsuin.25.00003 · Cited by 10
Foschi, M., Colantoni, V., Reale, S., Scappaticci, C., D’Archivio, A. A., & Biancolillo, A. (2025) · Applied Sciences · doi:10.3390/app15031572 · Cited by 6
Ma, J., Chai, M., Li, J., Wang, S., & Tang, Z. (2024) · Environmental Technology & Innovation · doi:10.1016/j.eti.2024.103606 · Cited by 10
Reviews on Flexible Force Sensors Based on Fiber Assemblies with Mass Production Efficiency
Wu, L., Jin, Y., Xia, Z., Han, J., Han, W., Dong, K., Tang, Y., & Jiang, Q. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202302162 · Cited by 6
Engineering antiviral properties in cotton: Agents, methods, and future directions
Sharif, A., & Islam, M. M. (2025) · Next Materials · doi:10.1016/j.nxmate.2025.101263 · Cited by 8
Stouffer, C. J., & Marcus, R. K. (2023) · Journal of Analytical Atomic Spectrometry · doi:10.1039/d3ja00248a · Cited by 5
Emon, J. H., Munshi, M. H., Jaman, M. A. A., Kamruzzaman, M., Akter, K., & Islam, S. R. (2026) · Materials Today Communications · doi:10.1016/j.mtcomm.2026.114822 · Cited by 4
Processing techniques, test methods, and regulatory standards of smart textiles
Mathew, J. T., Inobeme, A., Adefusika, A. M., Monday, M., Azeh, Y., Otori, A. A., Shaba, E. Y., & Mamman, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15471-3.00016-9 · Cited by 6
Microplastic leachates in farmland: impact of acid rain on DOM characteristics and metal release
Xu, Y., Mao, Y., Li, X., Li, M., Guo, T., Zhang, H., & Cai, Y. (2025) · Environmental Science Processes & Impacts · doi:10.1039/d5em00233h · Cited by 4
Research on the safety level of special-purpose knitwear products
Martyrosyan, I., Garbazhiy, К., Voitsekhivskyi, V., & Nicolaichuk, L. (2024) · Товарознавчий вісник · doi:10.62763/ef/1.2024.146 · Cited by 3
Nano-finishing in Apparel Textiles
Singh, N., Madhu, A., & Yadav, M. (2024) · Materials horizons · doi:10.1007/978-981-97-2696-7_14 · Cited by 4
Nanofunctional finishes for textile applications
Jiang, Q., & Reddy, N. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-21691-6.00022-6 · Cited by 3
Silva, M. J., Garcia, L. F., & de Oliveira, L. P. (2024) · Projetica · doi:10.5433/2236-2207.2024.v15.n1.49290 · Cited by 2
Yang, Y., Park, J., Choi, S., Lee, K., Lee, C., & Yoon, C. (2025) · Air Quality Atmosphere & Health · doi:10.1007/s11869-025-01731-6 · Cited by 2
Dalzell, K. A., Ledergerber, T. D., Tymitz, M., Trejos, T., & Arroyo, L. (2025) · Journal of Forensic Sciences · doi:10.1111/1556-4029.70252 · Cited by 2
“Antimony is a common component in flame re-tardants that are used to make various materials, including textiles and some leathers, more resistant to fire [ 62 ].”
Do metals in tampons pose a health risk? A toxicological risk assessment study
Jin, Y., Eppihimer, M. J., Alam, M. S., Powell, A. T., Margerrison, E., & Nawaby, A. V. (2026) · Toxicological Sciences · doi:10.1093/toxsci/kfag065 · Cited by 2
Xiong, M., Cui, D., Cheng, Y., Ma, Z., Liu, C., Yan, C.-A., Li, L.-Z., & Xiang, P. (2025) · Toxics · doi:10.3390/toxics13080622 · Cited by 5
Sensor based Metal Detector in Cloth Fabrication
Senthilnathan, N., Sundaram, K. M., Anusri, V., Baby, E., Harish, B., & Kumar, R. (2024) · International Conference on Soft Computing for Security Applications (ICSCSA) · doi:10.1109/icscsa64454.2024.00107 · Cited by 1
Contamination levels and sources of trace elements in river sediments of Northeast Brazil
de Oliveira, A. F. B., Gomes, B. R. D. S., do Nascimento, R. M., Moraes, A. S., & Santos, J. M. (2026) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-025-07031-x · Cited by 1
“In the metropolitan area, sites C1, C9, and C10 showed similar trends of increased contamination by Co, Cr, and Ni, which are elements used in textile manufacturing (Reis et al. 2019; Rujido-Santos et al. 2022), suggesting a common source of contamination.”
InfluentialArjona, L., Calero, M., Quintana, M. A., Solís, R. R., & Martín-Lara, M. Á. (2026) · Applied Sciences · doi:10.3390/app16041870 · Cited by 1
D’Agostino, A., Facchiano, S., Vineis, C., Hadhri, M., Rosa, R. P., Rosace, G., Safarshargh, A., & Trovato, V. (2026) · Results in Chemistry · doi:10.1016/j.rechem.2026.103615 · Cited by 1
Mishra, A., & Butola, B. S. (2022) · Journal of The Institution of Engineers (India) Series E · doi:10.1007/s40034-022-00253-5 · Cited by 1
“A fixed amount of sample was subjected to a microwave-assisted acidic digester at 300 °C for 28 min [36].”
MethodEDXRF and the relative presence of K, Ca, Fe and as in amyloidogenic tissues
Ihsan, N. S. M. N., Sani, S. F. A., Looi, L., Pathmanathan, D., Cheah, P., Chiew, S.-F., & Bradley, D. A. (2023) · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2023.123743 · Cited by 1
Date estimation of fabrication and repair of Color garments encouragement banner
Pak, S., An, B., & Yun, C. (2024) · Fashion and Textiles · doi:10.1186/s40691-024-00390-y · Cited by 1
“Since the early 1930s, TiO 2 has been adopted as a delustering agent to control the luster of man-made fibers (Periyasamy, 2023; Puls et al., 2011; Rujido-Santos et al., 2022).”
BackgroundAcid digestion of nonwoven textiles for measuring their trace element content by ICP techniquesPreprint
Mercier, G. M., Cheyns, K., Nkanda, R., Machiels, R., Dewinne, A., Waegeneers, N., Mast, J., & Montalvo, D. (2022) · Research Square · doi:10.21203/rs.3.pex-1924/v1 · Cited by 1
Delgado-Gallardo, J. (2023) · Cronfa (Swansea University) · doi:10.23889/suthesis.63499 · Cited by 1
Elgogary, M., Selim, M., & Ashour, E. (2024) · Journal of Agricultural Chemistry and Biotechnology · doi:10.21608/jacb.2024.281919.1079
Quality assessment of textile products as a basis for responsible production and consumption
ПЕЛИК, Л., Kalashnyk, O., Kyrychenko, O., & Moroz, S. (2024) · BIO Web of Conferences · doi:10.1051/bioconf/202411401024
“The authors [24] emphasise the importance of studying metals and metal compounds in textiles and characterise the sources of their occurrence.”
BackgroundFERMENTING KASIM WITH DIVERSE SUGARS – A NOVEL APPROACH TO AN ANCIENT NATURAL DYE
Agrawal, A., Aggarwal, S., & Gupta, C. (2025) · Tekstil ve Mühendis · doi:10.7216/teksmuh.1557325
Noga, M., & Jurowski, K. (2025) · Environmental Toxicology and Chemistry · doi:10.1093/etojnl/vgaf124
Turner, A., & Anson, S. (2025) · Environmental Pollution · doi:10.1016/j.envpol.2025.127566
Ismail, Z. S., Hikmahyanti, H., Darus, F. M., Ahmad, A., & Jaafar, M. H. (2025) · Malaysian Journal of Medicine and Health Sciences · doi:10.47836/mjmhs.21.4.5
Akça, C., & Doyuk, F. (2026) · Celal Bayar Üniversitesi Fen Bilimleri Dergisi · doi:10.18466/cbayarfbe.1650491
Metal Detection System in Cloth Fabrication
Logeswaran, T., Shanmugam, N., Surendar, V., Dheshek, M. P., Dhayanithi, D., & Manibharathi, S. (2026) · International Conference on Intelligent Computing and Control Systems (ICICCS) · doi:10.1109/iciccs67901.2026.11502855
“The old inspection procedures are not always reliable and efficient [2], [4].”
Begum, W., Sarkar, A., & Mandal, U. (2026) · Royal Society of Chemistry eBooks · doi:10.1039/9781837679744-00341
Cressoni, C., Zanchin, G., Casalini, R., Rossetti, A., Fiorati, A., Brugnoni, C., & Nardo, L. D. (2026) · Waste Management · doi:10.1016/j.wasman.2026.115777
Chemical and optical profiling of textile effluents and associated heavy metal risks in Bangladesh
Haque, M. M., Kabir, A. T., Shahrier, A., Ifty, M. S. S., Kabiraj, M. K., Hossain, M. R., & Tareq, S. M. (2026) · Journal of Trace Elements and Minerals · doi:10.1016/j.jtemin.2026.100328
Wicks, A. C. B., Miller, A. M., Takaku-Pugh, S., Xiao, R., Boettger, J. D., McCord, J. P., Park, J.-S., & Peaslee, G. F. (2026) · Environmental Science & Technology · doi:10.1021/acs.est.6c06909
Metadata
- Authors
- Rujido-Santos, I., Herbello-Hermelo, P., Barciela-Alonso, M. C., Bermejo-Barrera, P., & Moreda-Piñeiro, A.
- Affiliations
- Universidade de Santiago de Compostela (ES)
- The Group of Trace Element, Spectroscopy, and Speciation (GETEE), Institute of Materials iMATUS, Department of Analytical Chemistry, Nutrition, and Bromatology, Faculty of Chemistry, Universidade de Santiago de Compostela, Avenida das Ciencias, s/n, 15782 Santiago de Compostela, Spain
- Venue
- International Journal of Environmental Research and Public Health
- Publisher
- MDPI AG
- Published
- 2022-01-15
- Volume
- 19
- Issue
- 2
- Pages
- 944
- ISSN
- 1660-4601 (ISSN-L)
- PMC
- PMC8775849
- OpenAlex
- W4206000274
- Cited by
- 53
- References
- 55
- Citations by year
- 2026: 11 · 2025: 12 · 2024: 17 · 2023: 9 · 2022: 4
- FWCI
- 4.79
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- International Journal of Environmental Research and Public Health (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Consellería de Eduación e Ordenación Universitaria, Xunta de Galicia (ED431C2018/19)
- Ministerio de Economia y Competitividad, Gobierno de España (INNOVANANO RT2018-099222-B-100)
- Topics
- Physical Sciences › Chemistry › Analytical Chemistry › Analytical chemistry methods development
- Physical Sciences › Environmental Science › Water Science and Technology › Environmental and Analytical Chemistry Studies
- Physical Sciences › Environmental Science › Pollution › Heavy metals in environment
- Keywords
- metal nanoparticles, heavy metals, lead, cadmium, hexavalent chromium, arsenic, mercury, regulatory compliance
- MeSH terms
- Arsenic, Cadmium, Mercury, Metals, Textiles
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.